Inlet Valve Parts

The Water Inlet Valve Assembly is an OEM replacement part for Whirlpool washing machines. It is responsible for controlling the flow of water into the washer during fill cycles. A faulty valve assembly can cause issues such as abnormal sounds, reduced or no water flow, or leaks.

Symptoms of a bad water inlet valve include:

• The washer not filling or partially filling with water
• Odd noises coming from the valve area during fill cycles  
• Water continuously running into the washer even when not in use
• Leaks around or below the valve area

Causes of a bad water inlet valve can include mineral buildup restricting water flow, worn internal components allowing unintended water passage, or damage from fluctuations in water pressure over time.

Note: If hose clamps are rusted order 4 of WP285655.

This OEM part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 
 

The Water Valve and Bracket Kit is an OEM part for GE refrigerators. It includes a water valve and a mounting bracket designed to facilitate the connection and operation of your refrigerator's ice maker and water dispenser system. This part controls the flow of water into the refrigerator, ensuring that both the ice maker and water dispenser receive the proper amount of water at the correct pressure.

Causes of a bad Water Valve and Bracket Kit can include mineral deposits from hard water, which can clog or damage the valve, and normal wear that might cause the valve to leak or fail to open or close properly.

Symptoms of a bad Water Valve and Bracket Kit include:

• No water output from the dispenser
• Slow or no ice production
• Water leakage around the refrigerator

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Check Valve is an OEM part for LG dishwashers. It prevents the backflow of water into the dishwasher, ensuring that water only flows in the intended direction. This helps maintain the efficiency of the washing cycle and prevents contamination of clean dishes.

The check valve can fail due to reasons such as wear and tear, blockage from debris or hard water deposits, or damage from high water pressure. Over time, the internal components can degrade, leading to improper sealing.

Symptoms of a bad check valve include:

• Water backing up into the dishwasher
• Poor cleaning performance due to improper water flow
• The dishwasher not draining properly
• Unusual noises during the wash or drain cycles

This OEM LG part is also compatible with certain models of Kenmore dishwashers.

The Inlet Valve Assembly is an OEM part for LG front-loading washing machines. It is a critical component that controls water flow into the washer tub. Comprised of durable solenoid valves and precision sealing elements, the inlet valve assembly works automatically to supply the appropriate amounts of hot and cold water at predetermined stages in each cycle. 

Causes of a bad inlet valve can include mineral buildup obstructing valve ports over time, worn valve seals resulting in water leaks, or electrical faults preventing the solenoids from opening and closing reliably.

Symptoms of a bad inlet valve assembly include:

• The washer failing to fill with water 
• Uneven or unbalanced water temperature
• Water leaks at the valve connections
• Error codes related to water level or temperature detection

This OEM LG part is also compatible with Sears/Kenmore front-load washers. 
 

The Triple Water Valve is an OEM part for GE washing machines. This valve controls the flow of hot, cold, and warm water into the washing machine, ensuring the proper temperature and water level for each wash cycle. It is a critical component for the accurate filling and rinsing functions of the washer.

Replace the triple water valve if it becomes faulty due to mineral buildup, wear and tear, or electrical issues. 

Symptoms of a bad triple water valve include:

• The washer not filling with water
• Incorrect water temperatures during cycles
• Water leaking from the valve
• Slow or uneven water flow into the machine

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Float Assembly is an OEM replacement part for LG dishwashers. It is a sensor located inside the dishwasher that monitors water levels during wash cycles. The float assembly precisely indicates water levels to the control system to determine adequate water is available throughout the cleaning and rinsing functions. Proper water level detection is crucial for achieving sparkling clean dishes.

Causes of a faulty float include mineral buildup on sensors overtime, cracks or leaks developing, and damage to electrical wiring from impacts.

Symptoms of a bad float assembly include:

• Incomplete or inefficient wash cycles due to low water levels
• Water remaining in the bottom of the tub after a cycle
• Drainage issues related to inaccurate water level readings
• Error codes related to improper filling and draining of water

This OEM LG part is also compatible with some Sears/Kenmore models.

The Water Valve is an OEM part for Frigidaire dryers featuring a steam cycle option. This valve controls the flow of water into the dryer drum during steam cycles.

Causes for replacement typically relate to standard wear and tear issues compromising the valve's ability to regulate water precisely during steam cycles. Mineral buildup from hard water sources can also obstruct full valve movement.

Symptoms of a faulty steam dryer water valve include:

• Inability to select steam cycle options
• Error codes related to steam or water systems
• Inconsistent steam levels during cycles

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This diverter assembly kit controls the dishwasher's wash-water routing. It switches flow between spray arms for targeted cleaning. Replacing a failed diverter restores proper water distribution and helps recover normal wash performance.

• Directs wash water between lower and upper/middle spray arms as the cycle advances
• Works with the control to provide zone/alternating spray for efficient cleaning
• Failure can cause poor cleaning on one rack or water spraying from only one arm
• May produce repeated clicking/grinding from the sump area or extended cycles while indexing

• Disconnect power and shut off water supply before servicing; expect some residual water
• Access the diverter at the sump/pump area; follow your model's service procedures
• Ensure seals/O-rings are properly seated and parts are aligned before tightening
• Run a short test cycle to check for leaks and confirm both racks receive spray

The Water Inlet Valve is an OEM part for Frigidaire refrigerators. It controls the flow of water into the refrigerator's ice maker and water dispenser, ensuring a steady and reliable water supply. This valve opens and closes as needed, allowing water to enter the ice maker and dispenser for proper operation.

Causes of a bad water inlet valve can include mineral buildup, wear and tear, or electrical issues. A malfunctioning valve can lead to problems with water flow, affecting the refrigerator’s ability to produce ice and dispense water properly.

Symptoms of a bad water inlet valve include:

• No water dispensing from the refrigerator
• Ice maker not producing ice
• Leaks from the valve area
• Unusual noises coming from the valve

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is the refrigerator's water inlet valve assembly. It controls and directs household water into the dispenser and ice maker as needed, restoring proper water flow and ice production.

• Opens to supply water to the ice maker and dispenser when energized
• A common fix for no/low water at the dispenser
• Can resolve no ice production due to no water fill
• May address leaks or continuous dripping from the dispenser/ice maker
• Failure can present as buzzing or clicking with little/no water flow

• Disconnect power and shut off the water supply before servicing
• Have a towel or small container ready to catch residual water
• Note hose and wire locations or take photos before removal
• After installation, restore water and power, then check for leaks and run a test fill

The Refrigerator Water Valve is an essential component for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part ensures reliable control of the water flow, allowing your appliance to deliver consistent and purified water whenever needed. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and seamless integration with your existing system. The DA62-04027A water valve features durable construction, providing long-lasting functionality and reducing the need for frequent replacements. By choosing this genuine OEM part, you can trust the quality and performance that Samsung is known for, ensuring your refrigerator operates smoothly. Installing the Refrigerator Water Valve is straightforward, making it an ideal choice for DIY enthusiasts looking to restore their applianceGÇÖs water dispensing capabilities. Enhance the efficiency of your refrigerator and enjoy uninterrupted access to fresh water with this reliable and high-quality water valve.

The Drain Solenoid is an OEM part for GE dishwashers. This component controls the draining function by opening and closing the drain valve, ensuring that water is properly expelled from the dishwasher at the appropriate times during the wash cycle.

Common causes of a bad drain solenoid include electrical malfunctions, buildup of debris or mineral deposits, and general wear over time. These issues can prevent the solenoid from operating correctly, leading to improper draining.

Symptoms of a bad drain solenoid include:

• Standing water at the bottom of the dishwasher after the cycle
• Unusual noises during the draining process
• Error codes related to draining
• Water leakage from the dishwasher

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dishwasher Brake Case Assembly is a high-quality replacement part designed to ensure your Samsung dishwasher operates smoothly. This genuine OEM part guarantees compatibility and a precise fit, maintaining the integrity of your appliance. The brake case assembly plays a crucial role in controlling the doorGÇÖs movement, preventing sudden closures and potential damage. By replacing a worn or faulty brake case, you can restore your dishwasherGÇÖs functionality and extend its lifespan. Installing this assembly is straightforward, allowing you to quickly get your dishwasher back to optimal performance. Crafted with durable materials, the Dishwasher Brake Case Assembly offers reliable performance and long-lasting results. Trust in this genuine OEM part to provide the functionality and safety your kitchen appliance needs, enhancing your overall user experience and ensuring your dishwasher runs efficiently.

The Check Valve is an OEM part for LG dishwashers. This component plays a crucial role in preventing backflow of water into the dishwasher, ensuring proper drainage and efficient operation during the washing cycle.

Causes of a bad check valve can include clogging due to food particles or debris, wear and tear over time, or damage from exposure to harsh chemicals or high water pressure. These factors can compromise the valve's ability to function correctly, leading to issues with water flow.

Symptoms of a bad Check Valve include:

• Water not draining properly
• Dirty water backing up into the dishwasher
• Unpleasant odors from standing water
• Incomplete cleaning cycles

This OEM LG part is also compatible with Sears/Kenmore.

The Washer Check Valve Ball is a genuine OEM part engineered to ensure the optimal performance of your washer. This essential component regulates water flow within the appliance, preventing leaks and maintaining consistent water levels during cycles. Crafted from high-quality materials, the check valve ball guarantees durability and reliable operation, reducing the risk of water hammer and other common issues. Installing this part is straightforward, allowing you to restore your washer's functionality without the need for professional assistance. Designed specifically for Samsung washers, the Washer Check Valve Ball offers a perfect fit and seamless integration, ensuring your appliance runs efficiently and effectively. By replacing a worn or damaged check valve ball with this genuine OEM component, you can extend the lifespan of your washer and enjoy peace of mind knowing that your appliance is functioning at its best. Enhance your washer's reliability and performance with this essential replacement part.

The Inlet Valve Assembly is an OEM part for GE washing machines. This part controls the flow of water into the washer during the fill and rinse cycles.  

Causes of a bad inlet valve can include regular wear and tear, mineral deposits from hard water, or electrical issues.  

Symptoms of a bad inlet valve assembly include:

• The washer not filling with water or filling too slowly
• Water leaking from the valve area
• The washer filling with water when it is not supposed to
• Inconsistent water levels during cycles

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.