Circuit Board Parts

This main power control board assembly is the unit's central electronics module. It routes incoming power and coordinates the compressor, fan, and other loads so operation stays responsive and reliable when the original board fails from age, heat, or electrical surges.

• Distributes power to major components
• Interprets signals from the user interface and sensors to control operation
• Switches onboard relays and manages safety/logic for start-up and cycling
• Common symptoms include no power/display, unresponsive controls, won't start, runs but won't cool/dehumidify, or intermittent shutdowns

• Disconnect power and allow any capacitors to discharge before servicing.
• Access the electronics compartment; note wire locations and transfer connectors to the new board one at a time.
• Use ESD precautions; handle by edges and avoid flexing the board.
• Confirm all plugs are fully seated and reassemble before restoring power.

The Dryer Main PCB Assembly is essential for maintaining the functionality of your Samsung dryer. This genuine OEM part ensures reliable performance by managing the electrical operations of your appliance. Designed specifically for Samsung dryers, it offers seamless compatibility and straightforward installation. With the ASSY PCB MAIN-DV7000HA;M, you can restore your dryer to optimal working condition quickly and efficiently. This main PCB assembly controls key functions such as drying cycles, temperature regulation, and sensor operations, providing consistent and efficient drying results. By choosing this genuine OEM part, you guarantee the quality and durability needed for long-term use. Whether your dryer is experiencing issues with cycle completion or temperature control, the Dryer Main PCB Assembly delivers dependable solutions. Enhance your dryerGÇÖs performance and extend its lifespan with this precise and high-quality replacement part, ensuring you get the best results from your Samsung appliance.

Color: Grey

This washer timer regulates the order and length of each wash, rinse, and spin stage by sending power to the right components at the right time. Replacing a failed timer restores proper cycle advancement and dependable operation.

• Sequences wash, rinse, drain, and spin through the complete cycle
• Directs power to the drive motor, water inlet valves, and drain pump as programmed
• Common symptoms it can help resolve: cycle won't advance, stops mid-cycle, runs longer than expected, or is stuck on one setting
• Mounts in the control console and interfaces with the cycle selector knob

• Disconnect power before servicing; verify controls are off
• Access the console; photograph or label wiring, then transfer wires to the new timer one at a time
• Secure the timer, reassemble the console, and align the selector/indicator
• Run a short test cycle to confirm proper advancement; check the lid switch and wiring

This is an oven control board and clock for electric ranges. The main purpose of this part is to monitor and control the temperature of the oven and the range. This part also functions as a display for time and temperature settings. This part may need to be replaced if the display is no longer lighting up properly or if any part of the display has burnt out or cracked. The part may also be in need of replacing if it is no longer responding to temperature or time commands. When preparing to replace this part, be sure to first unplug the range or shut off the correct circuit breaker that corresponds to the unit. It is also important to wear work gloves to protect the hands while replacing this part.This oven control board is designed for Jenn-Air, Maytag and Amana appliances. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The control board is sold as a single unit.

This OEM replacement part is a control board for washers. The control board is the main computer that sends signals to the washer to perform its essential functions. If the washer is no longer turning on, spinning, rinsing or draining properly, this could mean that the control board needs to be replaced. Luckily this is a relatively simple repair. To begin, start by shutting off all power to the appliance. Proceed to move the washer away from the wall to gain access to the upper back panel. Remove the upper back panel and locate the old control board. Pull it out of its mounted position and take note of the orientation of the wires attached to the old board. Reinsert the wire harness and individual wire into their correct terminals on the new board. Snap the board back into place and reinstall the upper back panel. This genuine replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand washers.

This mechanical timer controls your washer's cycle sequencing, advancing power to the valves, drive motor, and drain pump at the correct intervals. Replace it to restore reliable start, progression, and completion of wash, drain, and spin cycles.

• Regulates the order and duration of wash, rinse, drain, and spin
• Directs power to the inlet valves, drive motor, and drain pump per cycle selection
• Advances the timer knob through the cycle automatically
• Common symptoms of failure: cycle won't advance or gets stuck; stops mid-cycle; won't start; intermittent operation

• Disconnect power and turn off the water supply before servicing
• Access the timer through the control console; remove the knob/dial and mounting screws
• Transfer wires one at a time from the old timer to the new (take a reference photo)
• Reattach the dial/knob, secure the console, and run a test cycle to verify advancement

This part is an control board that's intended to replace a faulty or broken control board in washing machines. Over time, the control board can become worn, corroded, detached, or otherwise rendered ineffective, which may make it difficult or impossible for the user to manage the washer's functions and cycles. Before replacing this part, ensure the washing machine is entirely disconnected from the power and water source. Work gloves should be worn anytime a repair or replacement is attempted.This is a genuine OEM part made by Frigidaire and has been sourced directly from the manufacturer. This part is suitable for use on a variety of washing machine models that manufactured by Frigidaire, Electrolux, Westinghouse, and Kelvinator. It is a genuine OEM part and thus is manufactured from high-quality, durable, non-corrosive materials and is only sold individually.

This OEM part is a relay control board for ovens. An oven relay control board is a circuit board that receives signals from the main oven control board. The relay control board then relays the signal to regulate the oven's essential functions. Over time, a relay control board can become overworked. If the oven is no longer turning on, heating properly, or regulating its temperature, it might be time for a new relay board. Luckily, replacing this part is not a difficult process. To replace the relay board, make sure the oven is unplugged. Gain access to the upper back panel on the back of the range and remove the screws. Once the panel is removed access the relay board and remove the wire harness as well as any individual wires attached to the old board. Make sure to take note of the orientation of the wires. Replug the wires into their correct terminals on the new board and snap the new board back in place. Resecure the upper back panel.This genuine replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore brand ovens.

This electronic control board governs the dishwasher's cycles and overall operation. Replacing a failed board can restore proper cycle selection, start-up, and progress so the appliance runs reliably again. What it does

• Orchestrates cycle timing and switching of internal components
• Processes inputs from sensors and the door switch to manage operations
• Communicates with the user interface/console and status indicators
• Failure symptoms include: won't start, unresponsive controls, cycles that pause or won't advance, random beeping, or error codes

• One electronic control board

• Disconnect power at the breaker before servicing; verify no power is present
• Use ESD precautions; handle the board by the edges only
• Photograph/label connectors and transfer them one at a time to the new board without forcing pins
• Inspect wiring and the door switch/harness for damage before reassembly and testing

The Refrigerator Main Control Board Assembly is essential for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part ensures precise control over all the refrigeratorGÇÖs functions, including temperature regulation, cooling cycles, and defrosting processes. Designed specifically for Samsung refrigerator models, it guarantees a perfect fit and seamless integration with your appliance. Installing the main control board assembly can resolve issues such as inconsistent cooling, error codes, or unresponsive controls, restoring your refrigeratorGÇÖs reliability and efficiency. Made from high-quality components, this assembly delivers long-lasting performance, helping you avoid frequent repairs and extend the life of your appliance. Choosing this genuine OEM part ensures you receive a product that meets SamsungGÇÖs exact specifications, providing peace of mind and a smoother user experience. Enhance your refrigeratorGÇÖs functionality and enjoy the benefits of a well-regulated cooling system with the Refrigerator Main Control Board Assembly .

This electronic oven control board governs your range or wall oven's heating and display functions. Replacing a failed EOC restores accurate temperature control, reliable bake/broil operation, and responsive clock/timer performance.

• Regulates power to bake and broil elements using oven sensor feedback
• Controls set temperatures, preheat, and cycling to maintain heat
• Drives the clock, timer, and status indicators on the display
• Common symptoms: no heat or won't start, won't reach/set temperature, blank or unresponsive display, recurring fault codes

• Disconnect power at the breaker before servicing
• Handle the board by the edges and protect from static discharge
• Photograph wiring; move each connector to the matching terminal and transfer any mounting hardware from the original board
• After installation, run a test bake and verify temperature calibration per the unit's tech sheet

This motor control board regulates and powers the washer's drive motor, coordinating speed, direction, and spin. Replacing a failed module can restore proper tumbling/spinning performance and resolve common motor-related faults.

• Supplies variable-speed power to the drive motor for wash and spin
• Monitors motor feedback to maintain correct speed and direction
• Communicates with the main control to carry out cycle commands
• Common symptoms: no tumble or spin, erratic/incomplete spin, cycle stops with motor/communication errors

• Disconnect power before servicing; verify power is off
• Use ESD protection and handle the board by the edges
• Access the board inside the cabinet; move connectors one at a time and seat them fully
• Inspect the motor and wiring harness for shorts or damage before restoring power

The Electronic Control Board is an OEM part for Whirlpool dishwashers. As the central processing unit, this board regulates all wash and rinse cycles according to preprogrammed instructions. It communicates timing and commands to other crucial components.

Symptoms of a faulty control board include: 

• Failure to power on or unresponsive touch controls  
• Inability to select or advance through wash cycles
• Noise or vibration issues from improper component operation 
• Error codes appearing repeatedly on the digital display

Causes can involve water intrusion corroding circuits or individual component failure due to prolonged operation. Over time, environmental factors may inhibit board performance.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This electronic control board manages the washer's core cycles and settings. When it fails, the machine may not start, respond to inputs, or complete cycles reliably. Replacing it restores proper control of wash operations.

• Directs cycle selection, timing, and motor/valve operations
• Can lead to erratic behavior such as random stopping or incorrect cycle progression
• Intermittent or dead display/indicator response can also indicate a failed board

• Disconnect power before servicing; verify capacitor discharge where applicable
• Handle the board by edges; avoid static damage by using ESD precautions
• Transfer any connectors exactly by position; label wires as needed
• After installation, run a test cycle

This electronic control board is the central "brain" of your appliance. It manages power distribution, sensor inputs, and timing so selected functions run correctly. Replacing a failed board restores proper operation and reliable, responsive controls.

• Coordinates and sequences operations based on user selections and built-in programming
• Interprets inputs from sensors/switches and communicates with the user interface
• Drives components such as motors, pumps, valves, and relays as required
• Common symptoms of a failed board: appliance won't start or respond, cycle won't advance, stops mid-operation, intermittent behavior, or error/blinking status codes

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD precautions; handle the PCB by the edges to avoid static damage
• Photograph wiring and transfer connectors one at a time to the new board
• Some models require service-mode setup or programming after installation—follow the tech sheet for your unit