Gdf620hsjss Parts

The User Interface Control Board is an OEM part for GE dishwashers. It is responsible for controlling and managing the settings and functions of the dishwasher. It allows users to select different wash cycles, adjust settings, and monitor the progress of the dishwasher.

A bad User Interface Control Board can occur due to electrical malfunctions, damage caused by power surges, or wear and tear over time. If the control board becomes unresponsive, displays error codes, or fails to operate the dishwasher properly, it may be time to replace the User Interface Control Board.

Symptoms of a bad User Interface Control Board include:

• Unresponsive buttons or touchpad.
• Error codes displayed on the control panel.
• Inability to select or change wash cycles.
• Display screen not functioning properly.

If you're experiencing any of these issues, it's time to replace the User Interface Control Board with this genuine GE part. Regain full control over your dishwasher's settings and ensure an efficient cleaning. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Service Machine Control is an OEM component specifically designed for GE dishwashers. As the main control board, it regulates all wash cycles including temperature, filtration, spray arm rotation, drying functions and end of cycle signals.

Causes of a faulty service machine control include normal wear and tear over time. Electronic failures or water exposure from plumbing issues can also trigger malfunctions.

Symptoms of a failing control board are:

• Inability to progress through cycles fully
• Flashing error codes during washes
• Inconsistent wash and rinse performance
• Component damage from power overload issues

Replacing it with this genuine GE OEM part restores optimal cycle handling. Proper controls are essential for sanitizing every wash. The part is also compatible with Hotpoint, RCA and some Kenmore models.

Bring back smooth loading on the bottom level. This lower dishrack replaces bent or rusty racks so dishes sit securely and the rack glides cleanly without snagging or collapse.

What it does

• Holds plates, bowls, and cookware securely on the lower level
• Helps prevent items tipping or falling through broken tines
• Restores smooth slide-in/slide-out when rails and rollers are intact
• Replaces racks with rusted welds, missing sections, or warped frames

What’s included
One lower rack assembly.

Install notes

• Open the door, pull the rack to the stops, remove end caps, and slide the old rack out
• Seat the new rack on the rails and reinstall end caps—do not force
• Transfer any clip-on accessories or tine clips from the old rack if reusable
• Run a quick rinse to confirm smooth travel

The Door Latch is an OEM replacement part for GE dishwashers. It serves the critical function of securely keeping the door closed during wash cycles through its engaging bolt design.

Over extended use, aspects of the latch can degrade such as worn plastic catch areas, loosened screws, or a faulty latch hook mechanism. Causes are generally normal wear and tear. 

Symptoms of a bad latch include: 

• The door not closing fully or popping open accidentally  
• Inability to fully lock or latch no matter how hard the door is pressed
• Damaged or stripped screws holding the mechanism 

This OEM replacement part is compatible with Hotpoint, RCA and some Kenmore models as well.

The Main Control Board is an OEM replacement part for GE dishwashers. It serves as the central control unit for your dishwasher, responsible for coordinating and regulating various functions and cycles. It controls functions such as water temperature, cycle duration, and detergent dispensing. 

A bad Main Control Board can result in a range of issues, including cycle irregularities, error codes, or a complete failure of the dishwasher to function. Causes of a bad Main Control Board can include electrical failures, power surges, or damage due to moisture.

Symptoms of a bad Main Control Board include:

• Inconsistent or erratic cycle behavior
• Error codes or error messages displayed on the control panel
• Inability to start or complete a cycle
• Unresponsive control panel buttons

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tub Gasket is an OEM part for GE dishwashers. It is installed around the perimeter of the dishwasher door to create a water-tight seal during operation, effectively preventing water leaks. This gasket ensures that the dishwasher can maintain the necessary water level and pressure to clean dishes effectively, while also protecting your kitchen from water damage.

Causes of a bad Tub Gasket can include natural wear and tear from regular use, exposure to harsh cleaning chemicals that can degrade the rubber material, or improper installation leading to gaps or loosening.

Symptoms of a bad Tub Gasket include:

• Water leaking from around the dishwasher door
• Signs of mold or mildew on the gasket
• The gasket becoming hard or cracked
• Visible gaps between the gasket and the dishwasher door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Heating Element is an OEM part for GE dishwashers. It is responsible for heating the water during the wash cycles and for drying the dishes after the rinse cycle. Proper functioning of the heating element ensures optimal cleaning and drying performance.

Causes of a bad heating element can include mineral buildup from hard water, electrical faults, or general wear and tear over time. Damage to the heating coil or connections can also impair its functionality.

Symptoms of a bad heating element include:

• Dishes not drying properly
• Dishwasher cycles taking longer than usual
• Water not heating during the wash cycle
• Error codes related to heating issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Flood Switch Assembly is an OEM part for GE dishwashers that is responsible for detecting water levels in the dishwasher's base, preventing potential flooding by shutting off the water intake if an overflow is detected. This helps in avoiding water damage to your home and ensuring the dishwasher operates normally.

Symptoms of a bad Flood Switch Assembly include:

• The dishwasher not filling with water  
• Water not draining properly 
• The dishwasher stops during a cycle 

Causes of a bad flood switch assembly can vary from debris accumulation affecting the float's movement to electrical issues within the switch mechanism. Over time, wear and tear on the float or switch can lead to failures.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Single Speed Dishwasher Drain Pump Kit is an OEM replacement part for GE dishwashers. This important part works to drain water from the dishwasher at the end of each cycle. The pump ensures water is fully drained from the tub and pipes to prevent damage.

Causes of a bad drain pump can include normal wear and tear over extended use, blockages in the drain system, or failures in the electric motor.

Symptoms of a bad drain pump include:

• Incomplete or slow draining of water after cycles
• Water remaining in the bottom of the tub
• Strange noises or vibrations coming from the pump motor
• Leaks in or around the drain pump area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.

What it does

• Supports and guides the lower rack along the tracks
• Replaces broken, missing, or flat-spotted wheels and cracked carriers
• Helps prevent the rack from popping off the rails during loading
• Reduces drag that leads to stiff, uneven rack travel

What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.

Install notes

• Disconnect power before servicing the rack area.
• Pull the lower rack out; swap one assembly at a time to match left/right orientation.
• Fully seat tabs/locks on each carrier; verify wheels roll freely.
• Best practice: replace all four together for even tracking, then run a quick test cycle.

The Diverter Valve Assembly is an OEM part for GE dishwashers. This component controls the flow of water to different parts of the dishwasher, ensuring that the water is directed to the appropriate spray arms for effective cleaning.

You should replace this diverter valve assembly if it becomes faulty or malfunctions. Common causes of a bad diverter valve include wear and tear over time, clogging from debris or hard water deposits, or failure of internal components due to electrical issues.

Symptoms of a bad diverter valve assembly include:

• Inconsistent or poor cleaning performance
• Unusual noises during the wash cycle
• Water not reaching certain spray arms
• Error codes related to water flow issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.

Symptoms of needing to replace the lower rack roller include:

• Difficulty in sliding the lower rack in or out
• Excessive noise or grinding during rack movement
• The rack becoming stuck or not rolling smoothly
• Visible wear, cracks, or damage to the roller itself

Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Water Inlet Valve is an OEM part for GE dishwashers. This part controls the flow of water into the dishwasher. It opens and closes to allow water from the home's supply to enter the dishwasher at the correct times during the washing cycle.

Causes of a bad water inlet valve include wear and tear from regular use, sediment buildup from hard water, or mechanical failure of the valve components.

Symptoms of a bad Water Inlet Valve include:

• Dishwasher not filling with water
• Water filling too slowly or not stopping once the dishwasher is full
• Leaks detected around the valve area
• Unusual noises coming from the valve during the fill cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Circulation Pump is an OEM part for GE dishwashers. It is responsible for circulating water throughout the dishwasher. It pumps water from the bottom of the dishwasher and directs it to the spray arms, allowing for distribution of water and detergent to the dishes.

A bad Circulation Pump Kit can occur due to wear and tear over time, clogs or blockages in the pump, or electrical malfunctions. 

Symptoms of a bad Circulation Pump include:

• Inadequate cleaning results.
• Noisy operation or unusual sounds.
• Water not properly reaching the dishes.
• Leaks or flooding within the dishwasher.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Detergent Module is an OEM replacement part for GE dishwashers. It is designed to dispense the correct amount of detergent at the appropriate times during the wash cycle, ensuring that dishes are cleaned effectively. The module holds the detergent and releases it into the dishwasher when needed, contributing to the overall performance and efficiency of the appliance.

Causes of a bad detergent module can include buildup of detergent residues, which can clog the dispenser mechanism, or damage to the module's door or latch, preventing it from opening correctly. Additionally, electrical faults or wear and tear over time can impair the module's functionality, leading to ineffective detergent dispensing.

Symptoms of a bad detergent module include:

• The detergent not dispensing or remaining in the compartment after the wash cycle
• Dishes not being cleaned properly due to insufficient detergent use
• The module door not opening or closing correctly
• Leaks or drips from the detergent module area
• Error codes related to the dispensing system

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Silverware Basket Assembly is an OEM replacement part for GE dishwashers. This basket is designed to hold and organize silverware and utensils during the dishwashing cycle. It ensures that utensils are properly spaced and positioned to receive optimal cleaning, preventing them from nesting together and ensuring thorough water circulation.

Over time, the silverware basket can become worn or damaged due to regular use and exposure to high temperatures and detergents. Cracks, breaks, or missing sections can occur, leading to utensils falling through or becoming improperly cleaned.

Symptoms of a bad silverware basket assembly include:

• Utensils falling through the bottom or sides of the basket
• Cracks, holes, or broken sections in the basket
• The basket not fitting securely in its designated place within the dishwasher
• Rust or discoloration affecting the basket's integrity

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.