Need Help?
Call or text
High-temperature adhesive tube for securing gaskets, felt seals, and components in dryers, ovens, and other high-heat appliances. Replace when worn or missing.
After replacing thermal fuse once and having it fail a second time, I had to dig a little deeper to uncover the problem. I checked for blockage in the vent but everything was clear. I did, however, find that the drum had some up and down play in it. After closer inspection, I could see that the front drum seal was actually worn to the point that I could see a gap between the seal and the drum. I figured that the gap in the seal was letting air in and not letting sufficient air flow through the... Read more
High-temperature adhesive secures gaskets, seals, and feet in hot zones. Replace when parts loosen or seals fail. Confirm fit with your model number.
I took the cover off the transmission and determined that the only possible knocking had to be coming from the yoke. I ordered a new yoke and all the tub seals needed to put it back together like new. I also ordered a new drive pulley bearing because this bearing is always turning whenever the washer is used. I cleaned all the parts up while I was waiting for the new parts to arrive. I promised my wife I would make it look like new. I installed all the new parts in one day and let the... Read more
High temperature adhesive for dryers. Use to bond drum seals, felt guides, and gaskets during repairs. Replace when reattaching worn parts. Confirm fit.
I'm new to how a dryer works, so I just started taking it apart to see what exactly was causing it. The video examples on the APP website were all amazing. It gave me a good idea of what I was getting into and showed me the common repair issues. The dryer being 12 years old, I was on the fence about repairing or replacing. However, once I got a list of parts I might need and getting the confidence by watching the videos, I said "what have I got to lose." The cause of the scraping and loud... Read more
Adhesive for securing dryer door gaskets, lint screen felt, and seals. Heat-resistant silicone formula bonds rubber and fabric parts that crack or peel.
Seal and adhesive. Read more
Gasket sealer adhesive for dryers and laundry appliances. Bonds and seals gaskets during installation or repair. Replace when worn or missing.
Clear silicone adhesive for bonding dryer trim, panels, and components. Replaces missing or dried-out factory adhesive to restore secure, stable assemblies.
Non-corrosive silicone adhesive sealant for appliance repairs. Replace cracked or missing seals on door panels, trim strips, and interior edges.
Applying the silicone sealant at the bottom edges. Read more
Adhesive sealer for refrigerant line insulation where tubing enters or exits the cabinet. Seals openings to prevent air infiltration. Needed when original sealant is cracked, deteriorated, or missing.
Adhesive cord for ice makers and refrigerators. Secures components in place. Replace if cord is missing, worn, or no longer providing proper adhesion.
Cork sealer adhesive for refrigerators and freezers. Used to seal cork gaskets and insulation joints. Replace when dried out, cracked, or missing.
Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat. Read more
Foam seal cushions and seals dryer components to reduce vibration and prevent air leaks. Replace if worn, cracked, compressed, or missing.
Sealing kit replaces worn or damaged pump seals in dryers. Needed when original seals crack, deteriorate, or fail, causing leaks around the pump assembly.
Usually ships within 4 - 14 days