Parts for Frigidaire MMV150KBA: 03 - Oven,Cabinet Parts

Replaces cracked, burned, or missing waveguide cover in your microwave. Protects the magnetron opening from food splatter and moisture damage.

Fix microwave not heating or loud humming noise with this magnetron. Generates electromagnetic waves to cook food. Moderately difficult repair.

Microwave won't start or stopped working during use? A failed thermostat often causes complete shutdown. This temperature switch is replaceable DIY.

Microwave won't turn on or suddenly stopped working? This thermal fuse cuts power when overheating occurs. Simple 10-minute DIY fix restores power.

This replacement transformer provides the correct low-voltage power feed that control boards and other electrical circuits need to operate reliably. Replaces a worn or failed transformer to restore control power and normal appliance operation. What it does

• Steps down incoming line voltage to the lower voltage required by the appliance control circuits.
• Supplies stable power to the control board, relays, and sensors so features respond correctly.
• Common symptom: control panel is unresponsive or appliance does not start while main power is present.
• Common symptom: intermittent operation or controls cycling on and off.

• One replacement transformer (single unit)

• Disconnect all power to the appliance before beginning work to avoid shock.
• Handle wiring and terminals carefully; secure all connections and mount the transformer per the original orientation.

Microwave not heating or making unusual sounds? The high voltage capacitor stores energy for the magnetron. DIY repair with proper discharge safety.

Microwave won't heat? The high-voltage diode converts AC to DC for the magnetron. When it fails, your microwave runs but produces no heat. Moderate repair.

Captures grease and food particles from exhaust air in your microwave ventilation system. Replace when bent or saturated to restore airflow. Check fit.

Microwave won't start or is completely dead? This fuse protects against electrical overload. Requires disassembly to access. Often replace with switches.

Replacement light bulb for microwaves. Illuminates the interior and cooktop area. Replace when burned out or dim. Confirm fit with your model number.

Holds the bulb and provides electrical contact for microwave illumination. Replace when heat-damaged, cracked, or bulb won't stay secure. Confirm fit.

Replace a damaged or frayed power cord for your microwave. Essential when the original cord is cracked, worn, or missing to restore safe power connection.

Fix a microwave fan that won't shut off or overheating issues with this thermostat. Monitors temperature to prevent damage. Moderate DIY repair.

Microwave shuts down completely or stops heating? This hood thermostat monitors temperature and triggers the exhaust fan at 158°F to prevent overheating damage.

Fix an air conditioner that won't start or runs poorly. This compressor start/run capacitor restores motor operation and improves cooling performance.

Replaces a cracked or worn microwave door latch hook bracket that holds door switches in place. Mounts inside the unit to secure the door mechanism.

Microwave blowing fuses when door opens? Worn door release lever prevents proper door sealing, triggering safety switches. Direct fix for repeated fuse failures.

Microwave tripping breaker or won't start? A faulty door switch is often the cause. This safety switch detects door position. Moderate DIY repair.

Microwave tripping breaker or won't start? A faulty door switch is often the cause. This safety switch ensures your microwave only runs when the door is closed.

Duct assembly for microwave or microwave/hood combo installations. Replaces damaged, cracked, or missing ductwork. Essential for proper ventilation routing.

Protects and shields your microwave oven light bulb from food and debris while ensuring clear interior illumination. Replace when cracked or discolored.

Waveguide cover for microwaves. Shields the magnetron from food debris and grease. Replace if cracked, burned, or damaged to protect internal components.

Traps grease and particles from cooking to protect microwave components and exhaust system. Replace when clogged or damaged. Verify fit with your model.

Replacement wall mounting plate for over-the-range microwaves. Secures microwave to wall studs. Order if original plate is damaged, bent, or missing.

Replacement vent grille cover for microwaves and microwave-hood combos. Installs over the ventilation opening. Order when original is cracked or broken.

Replace your microwave's waveguide cover if it's cracked, burned, or missing. This protective cover shields the antenna opening in the cooking cavity.

Screens cooking vapors and restores proper airflow in your microwave's ventilation system. Replace when airflow weakens or odors persist. Confirm fit.

Microwave turntable stopped rotating? This motor powers the turntable for even heating. DIY-friendly repair—remove 7 bottom screws to access.

Connects the motor to the glass turntable tray in your microwave. Replace if cracked, broken, or worn to restore smooth tray rotation and proper cooking.

Support ring installs beneath the microwave turntable to provide stable, balanced rotation. Replace if cracked, broken, or missing for proper use.

Replace your broken or cracked microwave glass turntable tray. This rotating plate sits on the support roller ring inside the cooking cavity.

Fix weak airflow or overheating in your microwave with this blower wheel. Restores proper ventilation and cooling. Moderately easy DIY repair.

Fixes microwave fan running constantly or not working properly. Cooling fan motor replacement for when your microwave fan won't shut off or fails to start.

Exhaust damper installs on the back of over-the-range microwaves to control airflow direction. Replace if cracked, missing, or needed for vent conversion.

Controls airflow through your microwave's ventilation system. Installs at exhaust opening to prevent air backflow. Replace if cracked, missing, or damaged.

Fix a microwave turntable that won't rotate with this replacement motor. Restores proper heating and cooking. Moderate DIY repair for most models.

Replacement waveguide cover for microwaves. Protects the magnetron antenna from food splatter and grease. Replace if cracked, burned, or missing.

Spacer component for microwave installation. Provides proper clearance and support between mounting surfaces. Replace if cracked, broken, or missing.

Secures threaded connections inside your microwave. Replace when nuts are stripped, worn, or missing to restore a tight, stable hold on components.