Parts for Lg LFXC24726M/00: Dispenser Parts

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Mounting screw secures panels, brackets, and interior components in your refrigerator. Replace stripped, missing, or damaged fasteners to prevent rattling.

Replacement mounting screw for refrigerators. Secures internal components and panels. Order when original hardware is stripped, lost, or damaged.

Secure refrigerator panels, brackets, and internal components with this replacement mounting screw. Ideal for missing, stripped, or damaged fasteners.

Replacement mounting screw secures panels, brackets, and components inside your refrigerator. Needed when original screw is missing, stripped, or worn.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.

Secures panels, brackets, and components inside your refrigerator. Replace this fastener if worn, missing, or stripped to restore proper assembly.

Replace cracked or broken handle trim on your refrigerator. This cosmetic trim piece covers the handle mounting area and restores a clean appearance.

Replacement door handle for refrigerators. Installs on the exterior door. Replace when your original handle is cracked, broken, loose, or missing.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Routes airflow in your refrigerator's cooling system. Replace if you notice temperature inconsistencies or poor air circulation. Confirm fit with your model number.

Replacement freezer storage tray for bottom-mount refrigerators. Restores a level surface for frozen foods when your original tray is cracked or warped.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Refrigerator shelf roller assembly that attaches to pull-out shelves for smooth gliding. Replace if rollers are cracked, broken, or wheels no longer spin freely.

Replacement freezer drawer tray assembly for bottom-mount refrigerators. Includes removable tray, frame, and rollers. Restores cracked or broken drawers.

Reduces odors and airborne particles inside your refrigerator for fresher air. Replace when odors persist or every 6 months. Confirm fit with your model.

Replacement drawer tray assembly for refrigerator lower storage drawer. Restores food organization and support. Replaces cracked, warped, or missing trays.

Replacement drawer tray assembly for refrigerator lower storage drawer. Restores food organization and support. Replaces cracked, warped, or missing trays.

Platform that supports and guides refrigerator storage drawers along slides. Replace if cracked, damaged, or broken to restore smooth drawer operation.

Replacement freezer drawer tray assembly for bottom-mount refrigerators. Includes removable tray, frame, and rollers. Restores cracked or broken drawers.

Replace a cracked, chipped, or missing refrigerator shelf to restore stable storage and organization. Provides a secure, level surface for containers.

Replacement glass shelf for refrigerator storage. Installs inside fridge compartment to support food items. Needed when original is cracked or broken.

Refrigerator shelf assembly installs inside the fresh food compartment. Replace if your shelf is cracked, broken, or no longer holds items securely.

Plastic rail holder that secures drawer glide rails in your refrigerator. Replace if cracked, broken, or missing to restore proper drawer support.

Secures slide rail assembly for smooth drawer or shelf tracking. Replace if cracked, broken, or missing to restore proper support and alignment.

Fix a freezer drawer that won't slide smoothly or falls out of alignment with this guide rail assembly. Replaces worn tracks causing rough operation.

Restores smooth drawer sliding in your refrigerator or freezer. Replace this rail guide assembly if cracked, broken, or causing drawer misalignment.

Secures slide rail to mounting point in refrigerator drawers. Replace if cracked, worn, or missing to restore proper alignment and smooth drawer operation.

Connects and supports your refrigerator's freezer drawer to the hinge assembly. Replace this connector if it's cracked, broken, or missing to restore drawer alignment.

Supports and guides refrigerator drawers for smooth opening and closing. Replace when worn or cracked to restore proper alignment and prevent binding or tilting. Confirm fit with your model number.

Shallow refrigerator bin for deli-style items in the Fresh Room compartment. Replaces cracked, broken, or missing trays to restore organized storage.

Fix spills overflowing from dispenser area or debris collecting in tray. This cover assembly contains leaks and protects the tray compartment. Easy install.

Center vegetable drawer tray for bottom-mount refrigerators. Replaces cracked, broken, or missing trays. Installs in center crisper section.

Right-hand vegetable drawer tray assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing produce storage trays in the crisper.

Left vegetable crisper drawer assembly for LG bottom-mount refrigerators. Replaces cracked, broken, or jammed drawers in the fresh food compartment.

Cracked or broken crisper top cover? This temperature variable cover assembly restores your refrigerator's fresh food compartment appearance and airflow.

Plastic mounting guide that aligns and secures refrigerator internal panels. Replace if cracked, broken, or missing to restore proper panel fit.

Replaces broken or worn internal guide that aligns and supports refrigerator panels. Restores proper fit and eliminates rattles from misalignment.

Supports and guides refrigerator drawers along slide tracks. Replace when drawers bind, stick, or come off track to restore smooth opening and closing.

Keeps refrigerator drawers aligned and sliding smoothly. Replace when drawers jam, sag, or move unevenly. Verify fit with your model number before ordering.

Rail guide assembly that supports and guides refrigerator pull-out drawers. Replace if rail is bent, cracked, or broken causing drawer misalignment.

Fix refrigerator door misalignment or poor sealing with this door alignment magnet. Restores magnetic retention to keep panels and components secure.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Mounting screw for refrigerator assembly. Replaces lost, stripped, or damaged screws. Essential hardware for securing panels and components.

Creates an airtight seal around your refrigerator door to prevent warm air from entering. Replace if torn, cracked, or no longer sealing properly. Easy snap-fit installation. Confirm fit with your model number.

Replace a cracked, broken, or missing refrigerator door basket. This bin mounts to the inner door to organize and hold bottles, condiments, and small items.

Decorative door trim handle for refrigerator doors. Replaces scratched, cracked, or worn trim pieces to restore a finished look and easier grip.

Decorative trim cover that fits over your refrigerator door handle. Replace if cracked, discolored, or missing to restore your handle's appearance.

Cosmetic trim piece that conceals and protects the door hinge area on bottom-mount refrigerators. Replace if cracked, broken, or missing for a finished look.

Covers and protects the refrigerator door hinge area. Replace if your hinge cover is cracked, broken, or missing to restore a clean appearance.

Replacement name plate for your bottom-mount refrigerator. This label attaches to the exterior and displays model information. Needed when original is faded, peeling, or missing.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Seals refrigerator door to maintain temperature and energy efficiency. Replace if torn, cracked, or not sealing properly. Verify fit with model number.

Seals refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or moldy. Confirm fit with your model number.

Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.

Plastic slide that supports and guides refrigerator or freezer drawers for smooth opening and closing. Replaces worn, broken, or cracked guides.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Refrigerator door shelf bin installs on the refrigerator door for storing condiments and beverages. Replace if cracked, broken, or damaged.

Replacement door shelf bin for refrigerator doors. Holds bottles, jars, and condiments. Replace if cracked, broken, or damaged. Installs on door interior.

Door stopper assembly for bottom-mount refrigerators. Prevents door from swinging too far or slamming. Replace if cracked, broken, or missing.

Door stopper assembly for bottom-mount refrigerators. Installs on door to limit opening range. Replace if cracked, broken, or missing for proper fit.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replaces worn or broken lower door hinge that no longer provides proper tension. Installs at the bottom center of French door refrigerators to pivot and support the door. Essential for smooth door operation and proper seal.

Rail holder secures door shelves in your refrigerator. Replace this part if it's cracked, broken, or missing and shelves won't stay properly aligned.

Slide rail that guides and supports refrigerator drawers for smooth opening and closing. Replace if worn, bent, cracked, or causing noisy operation.

Drawer rail connector for refrigerators. Secures and aligns the drawer slide rails to the cabinet frame. Replace if cracked, broken, or missing.

Mounting bracket that secures sliding rails inside your refrigerator. Replace this holder if the original is cracked, broken, or missing and rails have lost support.

Mounting bracket that secures sliding rails or guides in your refrigerator. Replace this holder if it's cracked, broken, or missing to restore alignment.

Restores smooth drawer operation in your refrigerator. Replace when drawers stick, sag, or don't glide properly. Verify fit with your model number.

Left-hand rail end cap for refrigerator drawer slides. Replaces cracked, broken, or missing caps on drawer rail ends. Secures and protects rail edges.

Replacement door bar for bottom-mount refrigerators. Installs on the interior door to hold items in place. Order a new one if cracked or broken.

Right-side rail cap for refrigerator drawer slides. Replaces cracked, broken, or missing caps that cover the drawer rail ends for a finished look.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Replace a cracked or broken cover support bracket in your bottom-mount refrigerator. Secures the internal cover panel in place. Direct fit part.

Center hinge assembly mounts between refrigerator and freezer doors on bottom-mount units. Replace if cracked, bent, or doors sag and don't align properly.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:

• Supports the refrigerator door and allows it to pivot smoothly.
• Replaces worn, bent, or damaged hinges that cause door sag or misalignment.
• Helps reduce noisy or grinding door operation when the hinge is failing.
• Promotes an even door seal to help maintain internal temperature consistency.

• Unplug the appliance and remove food from nearby shelves before starting work.
• Support the door while removing hinge fasteners to prevent dropping or damage.
• Reinstall using the original hardware; align the door and tighten fasteners securely but avoid overtightening.

Ice freezing in chute or water dripping from dispenser? This ice dispenser door assembly restores proper sealing. 15-minute DIY repair with video guide.

Microwave door won't latch or release properly? This lever holder bracket secures the door lever assembly to restore smooth door operation. Easy DIY fix.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Ice dispenser door spring maintains tension for smooth opening and closing of the ice compartment door. Replace if door won't seal or spring shows wear.

Secures the dispenser lever in place on your refrigerator. Replace if retainer is cracked, broken, or missing to restore proper lever stability.

Spring that tensions the ice dispenser door for proper closing and airtight seal. Replace if door won't close or ice gets stuck. Verify fit with model.

Fix dispenser drips and spills with this refrigerator dispenser funnel. Guides water flow cleanly to prevent messes. Simple 5-minute installation.

Ice stuck in dispenser door or won't dispense? This ice dispenser door lever controls ice release. DIY repair in under 15 minutes with video guide.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Refrigerator not cooling properly? This condenser coil assembly releases heat to keep your fridge cold. Professional installation recommended for evacuation.

Freezer not cooling or building excessive frost? This evaporator coil assembly absorbs heat to maintain proper temperatures. Restores effective cooling.

Fix refrigerator not cooling or freezing issues with this evaporator assembly. Essential component for proper temperature control in bottom-mount models.

Wire harness assembly for bottom-mount refrigerators. Connects electrical components throughout the unit. Replace if wires are damaged or frayed.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Water pooling inside your refrigerator? This drip tray collects condensate and defrost water to prevent leaks. Direct-fit replacement part.

Fixes uneven cooling and scraping noises by directing airflow from the fan. This guide restores proper air circulation throughout your refrigerator.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Drain tray assembly for bottom-mount refrigerators. Collects defrost water beneath the unit. Replace if cracked, broken, or leaking onto the floor.

Water pooling under your refrigerator? This drain tray assembly collects condensate and directs it properly to prevent leaks and water damage.

Front cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior cover panels. Essential for restoring appearance.

Refrigerator making unusual grinding noises or exposed machinery? This machinery cover assembly shields internal components from debris and damage.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix loud grinding noise or warm freezer with this evaporator fan assembly. Circulates cold air between compartments. 15-minute repair for most DIYers.

Freezer frosting over or refrigerator not cooling? This defrost control assembly regulates the defrost cycle to prevent ice buildup. Moderate DIY repair.

Fridge won't cool or evaporator coil freezing over? The defrost control assembly regulates cooling and defrost cycles. Moderate DIY repair.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix a dispenser that won't stop running or fails to dispense ice or water. This switch activates your dispenser when pressed. DIY-friendly repair.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fix uneven cooling or noisy fan operation with a new circulation fan motor. This DC motor restores proper airflow across coils. Moderate DIY repair.

If your refrigerator's ice maker or dispenser isn't working, this drive motor assembly powers rotating components. Direct fit for bottom-mount models.

Fix a refrigerator not cooling properly or displaying ER RF codes with this evaporator fan motor. Ensures even cooling throughout your fridge. DIY repair.

Replace a damaged or broken motor cover in your refrigerator. This protective cover shields the motor assembly from dust and debris. Simple repair.

Replace your refrigerator's light cover lens to restore proper illumination and protect the bulb. Fits if your dome light lens is cracked or yellowed.

Fix unusual noise or vibration from your refrigerator with this motor bracket. Secures the motor assembly for quiet operation. DIY-friendly repair.

Refrigerator light bulb cover protects the interior bulb from moisture and damage. Replace if cracked, yellowed, or broken to restore proper lighting.

Refrigerator light bulb cover protects the interior bulb from moisture and damage. Replace if cracked, yellowed, or broken to restore proper lighting.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Fix freezer light staying on or not turning on when door opens. This magnetic reed switch detects door position. Located on freezer wall, easy DIY.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Hearing rattling or vibration noises from your refrigerator? This motor bracket assembly secures and aligns the motor to reduce noise and prevent shifting.

Fix frost buildup and poor cooling with a new defrost heater. Melts ice from evaporator coils during automatic defrost cycles to maintain stable temps.

Freezer not defrosting or frost building up? This defrost heater melts ice off evaporator coils so cold air flows properly. DIY repair in 30-45 minutes.

LED light assembly for bottom-mount refrigerators. Replaces broken, dim, or non-functional interior lighting module. Installs in fresh food compartment.

LED light assembly that mounts in the freezer compartment to illuminate the bottom drawer. Replace if the light housing is cracked, broken, or missing.

Replaces worn LED backlight strip in your refrigerator display. Restores screen brightness and clarity when images appear dim or uneven. Verify fit with your model number before ordering.

Illuminates refrigerator interior when door opens. Replace when light dims, flickers, or fails to restore bright visibility. Verify fit by model number.

Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.

Power cord for bottom-mount refrigerators. Connects your refrigerator to the electrical outlet. Replace if cord is frayed, damaged, or missing.

Refrigerator not responding to controls or shutting off randomly? This power control board restores main electronic functions and power distribution.

Fix diagnostic and service mode issues with this refrigerator service power control board. Restores power and communication for technician onboarding procedures.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

Blank or unresponsive display? This control board powers your refrigerator's front panel, restoring temperature readouts and button functions.

Fix a refrigerator that won't power on or has non-responsive controls with this power control board assembly. Restores electronic functions and display.

Light bulb socket case for your refrigerator. Replace when the socket is cracked, melted, or fails to power the interior light. Verify fit by model number.

Fix frost buildup and warm temperatures with this refrigerator foam gasket seal strip. Replaces worn seals to restore airtight cabinet closure.

Ice maker icing over or not producing ice? This motor drives the auger and crusher mechanism. Direct-fit replacement restores ice production.

Ice maker not making ice or constantly leaking? This ice maker assembly kit restores ice production. DIY-friendly installation takes under an hour.

Secures components in your refrigerator assembly, reducing vibration and keeping parts properly seated. Replace when damaged or missing to restore snug fit. Verify model compatibility before ordering.