Parts for Lg LSC27925ST/01: Freezer Compartment Parts

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Black refrigerator door handle for replacing cracked, broken, or worn handles. Installs on refrigerator door exterior for smooth opening and closing.

Molded support clip that secures and positions refrigerator shelves. Replace if cracked, broken, or missing to restore proper shelf alignment.

Lower front grille cover assembly installs at the bottom of your refrigerator. Replace if cracked, broken, or missing to restore a finished appearance.

Water pooling in your refrigerator? A cracked or clogged drain tube assembly causes leaks and ice buildup. Direct replacement part for proper drainage.

Leveling leg assembly stabilizes and levels your refrigerator cabinet. Replace worn, stripped, cracked, or broken legs to eliminate rocking and vibration.

Replacement drawer slide guide that supports and aligns refrigerator drawers. Needed when the original guide is cracked, broken, or worn causing misalignment.

Refrigerator dispenser lever that controls ice and water dispensing through the door. Replace if cracked, broken, loose, or missing for proper function.

Mounting bracket that supports the dispenser paddle behind your refrigerator's front panel. Replace if cracked, broken, or lever feels loose or misaligned.

Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.

Replacement guide rail for refrigerator shelves. Mounts horizontally inside cavity to guide shelf height adjustment. Order if cracked, broken, or bent.

Replacement guide rail that supports and aligns refrigerator drawers for smooth sliding. Needed when original rail is cracked, broken, or split.

Replaces a cracked, chipped, or missing tempered glass shelf in your refrigerator. Slides into side rails to restore usable storage space.

Replaces a cracked, chipped, or missing tempered glass shelf in your refrigerator. Slides into side rails to restore usable storage space.

Removable tray insert for refrigerator crisper drawers. Organizes and separates produce while containing spills. Replace if cracked, warped, or broken.

Interior storage tray for refrigerators. Provides a stable, level surface for organizing food and containers. Replace when cracked, damaged, or missing.

Replace your refrigerator's light cover lens to protect the bulb and restore even illumination. Install when cracked, yellowed, or missing. Verify fit by model.

Replace your refrigerator's light cover lens if cracked, yellowed, or missing. Protects the interior light bulb from moisture and damage. Confirm fit with your model number before ordering.

Forms an airtight seal to keep cold air in and prevent temperature swings. Replace when worn, torn, or loose at corners. Confirm fit with your model number.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Small stopper that fits inside the handle assembly to limit travel and keep the handle properly seated. Replace if worn, missing, or broken to restore secure feel.

The Refrigerator Set Screw is an OEM part for LG refrigerators. This small but crucial component is used to secure various parts of the refrigerator, ensuring stability and proper alignment of the internal components. This set screw is sold individually.

Causes of a bad set screw can include stripping due to over-tightening, corrosion from moisture exposure, or wear and tear over time. A loose or missing set screw can lead to instability and misalignment of the refrigerator parts, potentially causing operational issues.

Symptoms of a bad refrigerator set screw include:

• Loose or wobbly internal components
• Doors not closing properly or misaligned
• Unusual noises from inside the refrigerator
• Parts becoming detached or misaligned

This OEM LG part is also compatible with Sears/Kenmore models.

Replace a worn refrigerator door gasket to restore an airtight seal. Prevents warm air infiltration, reduces frost buildup, and improves cooling efficiency. Confirm fit with your model number before ordering.

Removable door bin for butter, cheese, and small dairy items. Replaces cracked, broken, or missing bins to restore organized door storage.

Removable door bin for butter, cheese, and small dairy items. Replaces cracked, broken, or missing bins to restore organized door storage.

Holds bottles, jars, and condiments on your refrigerator door. Replace this bin if it's cracked, broken, or missing to restore organized storage space.

Refrigerator door bin installs on the interior door for organizing small items. Replace if cracked, broken, or no longer holding items securely in place.

Removable door bin that mounts to your refrigerator door for storing condiments, bottles, and small items. Replace if cracked, broken, or missing.

Replace your cracked, broken, or missing refrigerator door bin. This basket attaches to the interior door for storing bottles, jars, and containers.

Secures refrigerator door in fully closed and aligned positions. Replace if stopper is cracked, broken, or door won't stay aligned properly.

Replace your cracked, scratched, or discolored refrigerator door handle. Installs on fresh food or freezer doors for a secure grip and updated look.

Upper hinge assembly for refrigerator doors. Mounts at the top to support and pivot the door. Replace if hinge is worn, cracked, or broken to restore alignment.

Hinge lever mounts on the refrigerator door to guide smooth opening and closing. Replace if cracked, broken, or worn to restore proper door alignment.

Dispenser lever button for side-by-side refrigerators. Installs on the front panel to activate water/ice dispensing. Replace if cracked or missing.

Replaces broken or missing ice chute door on your side-by-side refrigerator dispenser. Installs at the front panel to control ice delivery access.

Replacement fastener nut for refrigerators. Secures internal components, brackets, and panels. Replace when missing, stripped, or loose to prevent vibration.

Lower hinge assembly supports and aligns your refrigerator door. Replace if cracked, broken, or worn causing misalignment or door sag. Installs at door bottom.

Refrigerator not cooling or freezing properly? The evaporator assembly absorbs heat to cool your fridge. Moderate DIY repair with basic tools required.

Mounting pin secures the fan blade to the motor shaft in your refrigerator. Replace if pin is broken, missing, or worn to properly attach the blade.

Refrigerator and freezer stopped cooling but lights work? This compressor set assembly restores cooling when the motor fails. Advanced DIY repair.

Fix temperature control issues and error codes with this PTC thermistor assembly. Restores sensor-based cycles and prevents inconsistent cooling in refrigerators.

This motor overload protector helps prevent motor overheating by cutting power if the motor draws excessive current or gets too hot. It restores normal operation once the motor cools, helping protect the main motor from heat-related damage. What it does:

• Senses excessive motor current/heat and interrupts power to stop the motor from overheating
• Can prevent burning or further damage when a motor is overloaded or stuck
• Common symptom: washer motor hums but won't start or spins intermittently
• Works as a protective component in the washer's motor circuit

• One overload (motor protector) as shown

• Disconnect power before accessing or replacing the overload
• Access the motor area from the rear or bottom panel per your model's service instructions
• Handle terminals carefully and reconnect wires to the correct terminals
• If symptoms persist after replacement, test the motor and related components.

Protective cover for the PTC relay in your side-by-side refrigerator. Replace this cap if it's cracked, broken, or missing to protect the relay component.

Rubber seat bumper for refrigerator shelves and drawers. Replaces worn, cracked, or missing rubber cushions that protect surfaces and reduce noise.

Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.

Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Uneven cooling or warm spots in your refrigerator? This evaporator fan air guide restores proper airflow for consistent temperatures throughout compartments.

Replacement drain pan that collects defrost water beneath your refrigerator. Install this drip tray if your original is cracked, damaged, or missing.

Fix tapping noises, FF error codes, or warm temperatures caused by a failing evaporator fan. This motor and blade assembly restores proper airflow.

Fix noisy or non-functional cooling with this refrigerator evaporator fan blade. Restores proper air circulation across coils. DIY-friendly repair.

Covers and protects the freezer fan compartment on your side-by-side refrigerator. Replace if cracked, broken, or missing. Mounts with screws.

Frost buildup in your refrigerator? This defrost sensor assembly monitors temperature and includes a thermal fuse to regulate defrost cycles properly.

Fix error code CF, warm spots, or inconsistent cooling with this evaporator fan motor. DIYers complete this repair in about 30 minutes with basic tools.

Fix FF error codes and warm spots with this evaporator fan motor. Stops grinding noises and restores airflow. DIY-friendly, 30-minute repair.

Fix vibration noise or motor movement issues in your refrigerator with this motor bracket. Secures the compressor motor in place for quiet operation.

Reduce refrigerator rattling and humming from the compressor area. This damper absorbs vibration between the compressor and base for quieter operation.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Power cord that connects your refrigerator to the wall outlet. Replace if cord is frayed, damaged, or has exposed wiring for safe electrical connection.

Wire harness connector that joins two wiring sections in your refrigerator. Replace this joint if the original is damaged, corroded, or causing loose connections.

Refrigerator not cooling or making unusual noises? This compressor pipe joint connects sealed system components. Professional installation recommended.

If your refrigerator won't power on, stops cooling, or displays error codes, the main control board may have failed. Moderate DIY repair in 30-45 minutes.

Display not working or buttons unresponsive? This control board restores power to your refrigerator's display and front panel controls for full functionality.

Fix a refrigerator that stopped making ice or won't release cubes with this ice maker assembly kit. Easy 3-minute DIY repair with one screw and wire clip.

Ice not dispensing or grinding noise from dispenser? This auger motor rotates the ice bin auger to move ice cubes through the chute. DIY repair part.

Structural bracket that secures internal components in your refrigerator. Replace if cracked, broken, or worn to restore proper alignment and stability.

Refrigerator not dispensing water or making ice without a filter? This bypass cap lets water flow directly to the dispenser and ice maker. Easy install.

Reduces sediment and particulates to improve water quality and protect your refrigerator. Replace every 6 months for optimal performance and taste.

Fix refrigerator ice maker or dispenser issues with this gear motor supporter. Common solution for jammed or non-functioning mechanisms. Moderate DIY repair.

The Left Hand Guide Rail is an OEM part for LG refrigerators. This part supports and guides the ice bucket, ensuring smooth and stable movement when inserting or removing the bucket from the freezer compartment.

Causes of a bad guide rail can include regular wear and tear, damage from overloading the ice bucket, or accidental impacts that cause the rail to bend or break.

Symptoms of a bad Left Hand Guide Rail for the ice bucket include:

• Difficulty sliding the ice bucket in and out
• The ice bucket not aligning properly or sagging
• Unusual noises when operating the ice bucket
• The ice bucket getting stuck or not moving smoothly

This OEM LG part is also compatible with some Kenmore models.

Replaces cracked, leaking, or damaged water tank that stores and supplies water to your refrigerator's dispenser and ice maker. Direct fit replacement.

Water line tube assembly for refrigerators. Connects water supply to ice maker or dispenser. Replace if cracked, leaking, or damaged to restore water flow.

Fix ice maker leaks or no water flow with this injector tube. Routes water from valve to ice maker tray. Moderate DIY repair, 30-60 minutes.

No water from dispenser or ice maker? This water inlet valve controls flow to both. DIY-friendly repair—takes about 15 minutes with basic tools.

Connects water tubing inside your refrigerator to supply the ice maker and water dispenser. Replace if cracked, leaking, or unable to hold tubing securely.

Secures bracket assemblies inside your refrigerator to keep components aligned and reduce vibration. Replace if cracked, bent, or missing.

Cracked or missing control panel cover? This assembly protects controls from spills and restores appearance. Simple snap-in installation in minutes.

Molded protective housing that shields internal wiring and hoses from wear and debris. Replace if cracked, broken, or missing to maintain safe operation.

Secures hoses and tubing in your refrigerator to prevent leaks. Replace if worn, cracked, or losing grip. Verify fit with your model number listed.

Refrigerator hose clamp band secures water lines and hoses. Replace if cracked, loose, or causing leaks. Verify fit with your model number before ordering.

Plastic clip secures tubing and pipes inside your refrigerator. Replace if cracked, broken, or missing to keep lines properly routed and organized.

Fixes erratic cooling, freezing in fridge section, or FF/dH error codes. This sensor monitors freezer temperature for proper cooling. Easy DIY repair.

Fridge freezing food or not cooling? This temperature sensor monitors internal temps and signals the control board. Fixes ER FF errors. Easy install.