Parts for Lg LMXS27676D/00: Ice Maker Parts

This is a replacement screw designed to secure appliance components where the original customized fastener is required. It restores proper fit and stability for panels, brackets, or assemblies that use this specific fastener. What it does:

• Replaces a missing, stripped, or damaged customized screw to restore secure attachment of parts.
• Helps eliminate rattling, loose panels, or misaligned assemblies caused by a faulty fastener.
• Matches the OEM mounting point to maintain correct part alignment and function.
• Suitable where the appliance design calls for this specific customized screw type.

• Turn off and unplug the appliance before servicing to avoid shock or injury.
• Use the correct screwdriver or bit to avoid stripping the screw head; do not force.
• Keep track of small parts during disassembly and reassembly; work on a stable surface.
• If threads are damaged or the mounting hole is stripped, inspect the mating component for repair before installing the new screw.

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

This customized replacement screw secures appliance components and restores proper fit and function. It's a direct-fit fastener designed for use where the OEM specifies a tailored screw to replace a worn, stripped, or missing fastener. What it does

• Fastens panels, brackets, or assemblies that use a manufacturer-specified customized screw
• Stops rattling or loose parts caused by worn or missing hardware
• Restores secure mounting for affected components
• Matches the OEM shape and thread pattern to prevent damage when used as directed

• Disconnect power and water before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Install by hand initially, then tighten snugly—do not overtighten to avoid thread damage
• Keep removed hardware organized so you replace parts in their original locations

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

Replacement drain tube assembly that directs wastewater from the appliance tub to the drain pump, restoring proper drainage and helping reduce leaks. Use when the original tube is cracked, kinked, clogged, or visibly leaking. What it does

• Channels wastewater from the tub to the drain/pump for normal draining.
• Maintains a sealed path to help prevent water leaks under or around the appliance.
• Replace when you see pooling water, slow or no drain, or visible damage to the tube.
• Works as the fluid conduit; does not include clamps or pump.

• Disconnect power and water supply before beginning any service.
• Route the tube along the original path and secure with existing clamps or the correct replacement fasteners.
• Avoid kinks, sharp bends, and contact with sharp edges to prevent leaks or premature wear.
• After installation, restore power/water and run a short drain cycle; check all connections for leaks.

This adjustable leveling leg assembly supports and stabilizes your appliance by threading into the base frame. Replacing a worn or missing leg helps you level the unit for smoother, quieter operation on uneven floors.

• Provides height adjustment to level the appliance and distribute weight evenly
• Helps prevent rocking, wobbling, and excess vibration or rattling
• Can improve door alignment and smooth opening/closing when the cabinet is properly leveled
• Useful when a leg is missing, damaged, or threads are stripped

• Disconnect power; if applicable, shut off the water supply
• Use a helper to safely brace or tip the unit; protect flooring when accessing the leg
• Unthread the old leg and hand-thread the new one; tighten as needed
• Adjust front-to-back and side-to-side until stable; all legs bear weight evenly

The Fan and Grille Assembly is an OEM component designed for LG refrigerators. This assembly circulates air within the refrigerator compartment to maintain even cooling temperatures. 

Causes of a bad fan and grille assembly can include failure of motorized fan components over time, buildup of dust or debris restricting airflow, or physical damage to fan blades.

Symptoms of a bad fan and grille assembly include:  

• Development of warm spots within the fridge
• Excessive frost or ice buildup inside 
• Louder than normal operating sounds
• Inability to maintain proper temperature settings

Replace yours today with this genuine OEM LG assembly to restore optimized air circulation for balanced cooling. This replacement assembly is compatible with Kenmore, Frigidaire, and GE refrigerator models. Proper airflow is essential for energy efficiency and food freshness.

This replacement freezer tray holds water to form ice and fits into the freezer compartment to restore ice production and keep cubes contained. It's a simple swap that brings back reliable ice-making without tools. What it does:

• Holds water in molded cavities so ice cubes form evenly
• Replaces cracked, warped, or missing trays that leak or fail to produce ice
• Keeps ice contained and easier to remove from the freezer
• Helps prevent spills and pooling inside freezer shelves

• Remove the old tray, clean the cavity area, and slide or set the new tray into place per your freezer's shelf layout
• Wash the tray with warm, soapy water and rinse before first use
• Do not use sharp tools to pry ice from the tray; twist gently or run under cold water to release cubes
• Keep away from direct heat or stovetop surfaces and avoid using abrasive cleaners

This refrigerator shelf assembly replaces a broken or worn shelf to restore a flat, stable storage surface for food and containers. It fits into standard shelf supports and helps keep items organized and visible. What it does:

• Provides a stable, flat surface for storing food, beverages, and containers
• Replaces cracked, chipped, or sagging shelves that no longer support items safely
• Restores proper spacing and organization inside the refrigerator
• Helps prevent spills by returning a level storage surface

• Remove food and loose items from the area before replacing the shelf.
• Slide the shelf into the existing tracks or supports until it seats securely.
• If glass, handle carefully and wear gloves to avoid cuts; inspect mounting supports for damage.
• If the shelf does not seat properly, do not force it—check for obstructions or damaged brackets.

This refrigerator shelf assembly restores a sturdy, level storage surface in the refrigerator compartment. Replace a cracked, bowed, or missing shelf to keep food organized and safely supported.

• Provides a stable surface for containers and food in the refrigerator section
• Replaces a damaged, warped, or missing shelf assembly
• Helps prevent spills and tipping by restoring proper support
• Common symptoms: cracked/shattered shelf, broken frame tabs, shelf won't sit level or stay in place

• Disconnect power before servicing
• Remove items and lift out the old shelf carefully; retain any reusable parts specific to your model
• Wear cut-resistant gloves and handle the new shelf with care
• Ensure the shelf is fully seated in the side rails/tabs and level before loading

This refrigerator shelf assembly restores a sturdy, level storage surface in the refrigerator compartment. Replace a cracked, bowed, or missing shelf to keep food organized and safely supported.

• Provides a stable surface for containers and food in the refrigerator section
• Replaces a damaged, warped, or missing shelf assembly
• Helps prevent spills and tipping by restoring proper support
• Common symptoms: cracked/shattered shelf, broken frame tabs, shelf won't sit level or stay in place

• Disconnect power before servicing
• Remove items and lift out the old shelf carefully; retain any reusable parts specific to your model
• Wear cut-resistant gloves and handle the new shelf with care
• Ensure the shelf is fully seated in the side rails/tabs and level before loading

This refrigerator shelf assembly restores a sturdy, level storage surface in the refrigerator compartment. Replace a cracked, bowed, or missing shelf to keep food organized and safely supported.

• Provides a stable surface for containers and food in the refrigerator section
• Replaces a damaged, warped, or missing shelf assembly
• Helps prevent spills and tipping by restoring proper support
• Common symptoms: cracked/shattered shelf, broken frame tabs, shelf won't sit level or stay in place

• Disconnect power before servicing
• Remove items and lift out the old shelf carefully; retain any reusable parts specific to your model
• Wear cut-resistant gloves and handle the new shelf with care
• Ensure the shelf is fully seated in the side rails/tabs and level before loading

The Glass Shelf is an OEM part for LG refrigerators. It provides a durable surface for organizing and displaying items inside the refrigerator and freezer compartments.

Causes of a faulty shelf can include chips or cracks developing from repeated loading and unloading of items over time. Temperature fluctuations may also cause warping.

Symptoms of a problematic glass shelf include:

• Sagging or bowing that prevents proper fitting
• Breaks or weak spots that compromise strength
• Difficulty removing or replacing the shelf

This OEM LG part is also compatible with some Kenmore models.

This refrigerator shelf assembly replaces a broken or worn shelf to restore a flat, stable storage surface for food and containers. It fits into standard shelf supports and helps keep items organized and visible. What it does:

• Provides a stable, flat surface for storing food, beverages, and containers
• Replaces cracked, chipped, or sagging shelves that no longer support items safely
• Restores proper spacing and organization inside the refrigerator
• Helps prevent spills by returning a level storage surface

• Remove food and loose items from the area before replacing the shelf.
• Slide the shelf into the existing tracks or supports until it seats securely.
• If glass, handle carefully and wear gloves to avoid cuts; inspect mounting supports for damage.
• If the shelf does not seat properly, do not force it—check for obstructions or damaged brackets.

This tray assembly replaces the right-side Fresh Room tray in your refrigerator. It restores sturdy, level storage in the pantry/deli area so items stay organized and the drawer fits and slides as intended. What it does:

• Provides the support surface for the Fresh Room/pantry section
• Seats and aligns the matching drawer/cover for smooth operation
• Replaces cracked, warped, or missing tray to restore proper fit
• Common symptoms: broken tabs, tray won't stay in place, drawer misalignment, unstable or tipping items

• 1 right-side Fresh Room tray assembly

• Empty the compartment; lift and tilt out the damaged tray from its supports
• Inspect side guides/rails; ensure mounting points are intact before installing
• Align the new tray with the right-side guides and slide/press fully into place
• Handle carefully to avoid stressing plastic; wear gloves for protection

This DC drive motor powers the appliance's main mechanical functions, restoring normal rotation and performance when the original motor fails. Replacing a worn motor can stop erratic operation and restore proper cycling. What it does

• Provides rotational drive for the appliance's motor assembly to enable normal operation
• Stops or reduces symptoms such as no spin/drive, intermittent operation, or loud unusual noises from the motor area
• Re-establishes reliable motor torque and speed control used by the appliance's control board
• Can resolve motor-related error codes or fault conditions tied to drive failure

• Disconnect power before starting and follow all safety instructions
• Handle connectors and wiring harnesses carefully; transfer any brackets or mounts from the old motor as required
• Verify connector orientation and secure fasteners per OEM torque guidance; test operation before reassembling panels

This LED light cover protects and diffuses the appliance's interior LED, restoring even lighting and a finished appearance. It is a direct-fit replacement designed to match the original factory lens. What it does:

• Protects the LED assembly from debris and impacts
• Diffuses and softens LED output for even interior illumination
• Restores a cracked, yellowed, or missing lens that affects light distribution
• Helps prevent direct contact with the LED board

• One LED light cover

• Disconnect power or unplug the appliance before starting
• Handle the lens carefully to avoid scratches; it typically snaps into place or is retained by a few clips
• Use a small screwdriver only if necessary to release retaining clips; avoid forcing parts

The Air Cleaner Filter Assembly is an OEM part for LG refrigerators. This part ensures the air within the appliance remains fresh and free of contaminants. This part minimizes odors and filtering out particulates, thereby maintaining the quality of the air circulating through the refrigerator and its contents. 

Over time, the effectiveness of the air cleaner filter can diminish due to the accumulation of particles and odors it has trapped. A decrease in air quality within the refrigerator, persistent odors despite cleaning, and an increase in the spoilage rate of food items can all be signs that the filter assembly may need replacement.

Symptoms of a bad Air Cleaner Filter Assembly include:

• Persistent unpleasant odors inside the refrigerator
• Increased spoilage of food items
• Noticeable reduction in air freshness or quality

This OEM LG part is also compatible with some Kenmore models.

Note: Right Side Drawer

Note: Left Side Drawer

This TV cover assembly replaces a damaged or missing rear cabinet panel to restore the set's enclosure and protect internal components. It helps maintain proper airflow and keeps circuitry and wiring shielded from dust and impact. What it does:

• Replaces a cracked, dented, or warped rear TV cabinet panel
• Protects internal electronics, boards, and wiring from dust and accidental contact
• Helps maintain proper ventilation pathways and chassis alignment
• Restores cosmetic appearance of the TV's rear housing

• One TV cover assembly

• Refer to the TV's service manual for disassembly/reassembly instructions and correct screw locations
• Power off and unplug the TV before beginning any repair; allow components to discharge
• Handle internal components and the cover carefully to avoid damage to boards, cables, and connectors

This guide assembly is a chassis alignment and support piece that helps hold and position internal TV components for proper fit and operation. Replacing a damaged guide restores secure mounting and reduces panel or board movement. What it does:

• Secures and aligns internal TV modules or boards to the cabinet
• Prevents rubbing, vibration noise, and intermittent contact from loose parts
• Helps keep the display and internal assemblies correctly spaced for reliable operation
• Useful when cracked, warped, or broken guides cause misalignment or rattling

• One guide assembly as shown

• Unplug the TV and remove power/antenna cables before starting
• Ground yourself to protect against static-sensitive components
• Use original screws and fasteners; inspect adjacent tabs and mounts for damage during installation

This rail guide assembly replaces a worn or broken slide rail that supports smooth movement of a drawer or component. Restores proper alignment and helps the drawer glide quietly and evenly. What it does:

• Guides and supports the drawer or sliding component along its track.
• Replaces damaged or bent rail sections that cause sticking or uneven movement.
• Reduces scraping, grinding, or noisy operation from a faulty guide.
• Helps restore proper alignment to prevent binding or partial closure.

• One rail guide assembly.

• Disconnect power (and water if applicable) and follow appliance-specific disassembly steps before replacing the rail.
• Basic hand tools are typically required; avoid forcing components to prevent breakage.
• Keep fasteners and any removed parts organized for reassembly.

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

This rail guide assembly restores smooth, reliable drawer movement by guiding and supporting the slide rail. Replaces a worn or broken guide so freezer/refrigerator drawers open and close without sticking or falling off track. What it does

• Guides the drawer slide rail and keeps the drawer aligned during operation
• Helps stop drawers from binding, sticking, or coming off the rail
• Reduces scraping, grinding, or noisy sliding caused by damaged guides
• Restores proper drawer support so contents remain stable while opening and closing

• Disconnect power before working inside the appliance and remove food, drawers and shelves that block access.
• Remove the old guide and install the new guide using the original mounting screws; match the correct side/orientation before fastening.
• Use common hand tools; avoid forcing parts—if the rail is bent or damaged, replace the rail as well.

This rail guide assembly supports and guides a refrigerator drawer as it opens and closes. Replacing a worn or damaged rail restores smooth sliding, proper alignment, and reliable closure to help maintain a consistent seal and temperature.

• Provides the sliding track that supports the drawer under load
• Keeps the drawer level and aligned within the cabinet
• Helps the drawer close fully for a proper gasket/door seal
• Common symptoms: drawer sticks or binds, tilts or sags, won't close completely, noisy/grinding movement, visible cracks or wear

• Disconnect power and empty the drawer before starting
• Remove the drawer/bin and front panel to access the rail
• Unfasten and remove the damaged rail; transfer any reusable clips/brackets from the original if applicable
• Secure the new rail, reinstall the drawer, and verify smooth travel and full closure

This freezer door foam assembly is the insulating panel that fits inside the freezer door to help maintain proper cold temperatures and reduce frost buildup. Replacing damaged or compressed foam restores the door's thermal barrier and helps the compartment run more efficiently. What it does:

• Replaces worn, torn, or compressed insulation inside the freezer door
• Restores the door's thermal barrier to reduce heat transfer and frost accumulation
• Helps the freezer maintain stable internal temperatures for better food preservation
• Can reduce cycling frequency by improving overall insulation performance

• One freezer door foam assembly

• Disconnect power to the appliance before beginning any service
• Typically accessed by removing the freezer door liner; handle the foam carefully to avoid tearing
• Re-seat into the door cavity or clips as original; ensure an even fit against the liner

This freezer door foam assembly is the insulating panel that fits inside the freezer door to help maintain proper cold temperatures and reduce frost buildup. Replacing damaged or compressed foam restores the door's thermal barrier and helps the compartment run more efficiently. What it does:

• Replaces worn, torn, or compressed insulation inside the freezer door
• Restores the door's thermal barrier to reduce heat transfer and frost accumulation
• Helps the freezer maintain stable internal temperatures for better food preservation
• Can reduce cycling frequency by improving overall insulation performance

• One freezer door foam assembly

• Disconnect power to the appliance before beginning any service
• Typically accessed by removing the freezer door liner; handle the foam carefully to avoid tearing
• Re-seat into the door cavity or clips as original; ensure an even fit against the liner

This insulating foam assembly fits inside the freezer door to restore core insulation and help maintain proper internal temperature. Replacing damaged or compressed door foam can reduce frost buildup and improve cooling efficiency. What it does:

• Replaces the factory foam core inside the freezer door to restore thermal insulation.
• Helps reduce frost and ice buildup by improving the door's insulation performance.
• Supports consistent freezer temperatures that can prevent food spoilage.
• Addresses symptoms such as excessive frost, long run times, or warm/freezing temperature fluctuations.

• Install with care to avoid damaging the door liner or gasket; follow OEM disassembly instructions.
• Disconnect power to the appliance before beginning service to avoid electrical hazards.

This replacement door gasket creates a heat-resistant seal between the oven door and the front frame. A tight seal helps the oven maintain temperature and cook evenly while keeping heat from escaping into the kitchen.

• Seals the oven cavity to reduce heat loss and temperature fluctuations
• Helps improve preheat times and baking performance
• Worn seals can cause heat leakage, longer cook times, or hot air felt around the door
• Cracks, flattening, or fraying indicate the gasket should be replaced

• Disconnect power before servicing; allow the oven to cool completely
• Open the door and carefully release the old gasket from its mounting clips
• Align and press the new gasket into the channel, seating each clip fully
• After installation, check for even contact around the door

This flexible perimeter seal keeps the refrigerator door closing tight so cold air stays in and warm air stays out. Replacing a worn or warped gasket helps restore stable temperatures, reduce frost and condensation, and improve overall efficiency.

• Creates an airtight seal around the door to maintain interior temperature and humidity
• Helps prevent condensation, sweating, and frost at the door opening
• Restores proper door closure when the old seal is torn, deformed, or compressed
• Common symptoms: visible gaps or cracks, moisture around the door, temperature fluctuations, longer run times

• Disconnect power and clear items from door bins before servicing
• Pull the old gasket from the retaining channel; some models require loosening retainer screws
• Clean the channel/mating surface; warm the new gasket with hot water or low heat to relax folds
• Seat the new gasket starting at the corners, then along the sides; close the door and check for even contact all around

The Door Gasket Assembly is an OEM part for LG refrigerators. This part creates a tight seal around the refrigerator door, preventing warm air from entering and cool air from escaping. 

Common causes of a bad gasket include wear and tear over time, damage from frequent door opening and closing, or exposure to temperature fluctuations that cause the material to degrade. 

Symptoms of a bad door gasket assembly include:

• Visible cracks, tears, or deformities in the gasket
• The refrigerator door not closing properly
• Increased condensation or frost buildup inside the refrigerator
• Higher energy bills due to the refrigerator working harder to maintain temperature

This OEM LG part is also compatible with some Kenmore models.

This Hinge Cover Assembly protects and conceals the door hinge area, restoring a clean appearance and preventing dirt or loose clothing from catching in the hinge. Fits where a cosmetic or protective hinge cover is needed. What it does:

• Covers the door hinge to shield moving hardware from debris and reduce pinching hazards
• Restores a finished look to a damaged or missing hinge area
• Helps keep lint, dust and small objects away from the hinge mechanism
• Can reduce noise caused by exposed hinge components when intact

• One Hinge Cover Assembly as shown

• Intended for drop-in replacement; follow your appliance's service manual for disassembly steps
• Disconnect power and water before starting any repair
• Handle plastic parts carefully to avoid cracking; use appropriate fasteners and torque per OEM guidance
• If hinge or mounting hardware is damaged, replace those components before installing the cover

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This handle assembly replaces a damaged or worn freezer door handle to restore secure opening and a finished exterior look. It provides the grip and mounting points needed for normal freezer door operation. What it does:

• Replaces the freezer door handle, restoring a secure, ergonomic grip
• Re-establishes correct mounting and alignment for smooth opening and closing
• Helps prevent further cabinet or door edge wear from a broken handle
• Suitable when the existing handle is cracked, loose, or missing mounting hardware

• One freezer door handle assembly

• Basic tools typically required
• Follow manufacturer instructions and support materials for safe removal/installation
• Disconnect power and empty door storage as needed to avoid damage or injury
• Keep small fasteners and clips organized during replacement to ensure proper reassembly

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This is the door handle mounting bracket assembly that secures the handle firmly to the door. It replaces a damaged or stripped bracket to restore a solid, wobble-free grip and reliable handle attachment.

• Mounts and secures the door handle to the door/frame
• Maintains alignment to prevent handle wobble or looseness
• Replaces cracked, broken, or stripped brackets to restore proper attachment
• Typical symptoms: loose or wobbly handle, handle pulls off, visible damage at the handle mount, rattling at the handle area

• Disconnect power before servicing and work carefully to avoid damaging the door surface
• Support the handle while loosening and tightening set screws or fasteners
• Retain and reuse original mounting hardware if it's in good condition
• Align the new bracket in the original location; do not overtighten fasteners

Left side

The Door Gasket Assembly is an OEM part for LG refrigerators. This part creates a tight seal around the refrigerator door, preventing warm air from entering and cool air from escaping. 

Causes of a bad door gasket assembly can include regular wear and tear, damage from frequent door openings and closings, or exposure to temperature fluctuations that degrade the material. 

Symptoms of a bad door gasket assembly include:

• Visible cracks, tears, or deformities in the gasket
• The refrigerator door not closing properly
• Increased condensation or frost buildup inside the refrigerator
• Higher energy bills due to the refrigerator working harder to maintain temperature

This OEM LG part is also compatible with some Kenmore models.

The Mullion Flipper Assembly is an OEM part for LG refrigerators. This assembly, located between the refrigerator doors, helps seal the space between the doors when they are closed, improving energy efficiency by preventing cold air from escaping.

Causes of a bad mullion flipper assembly can include wear and tear over time, damage from frequent opening and closing of the doors, or issues with the hinges and connectors that secure it in place. A damaged or malfunctioning mullion flipper can lead to temperature inconsistencies and increased energy usage.

Symptoms of a bad mullion flipper assembly include:

• Visible damage or wear on the assembly
• Cold air escaping from between the refrigerator doors
• Increased frost buildup inside the refrigerator
• Higher energy bills due to the appliance working harder to maintain temperature

This OEM LG part is also compatible with Sears/Kenmore models.

This replacement drawer guide restores proper tracking and smooth operation to a refrigerator or freezer drawer. It helps keep the drawer aligned and reduces scraping, sticking, or uneven movement for reliable daily use. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Replaces a worn, cracked, or bent guide that can cause sticking or misalignment
• Reduces drawer rattling and scraping against the cabinet
• Helps prevent drawer drops or catching when pulling open or pushing closed

• Unplug the appliance or switch off power before servicing to avoid electrical hazards
• Remove the drawer and any screws or retaining clips holding the old guide; keep hardware if it's reusable
• Align the new guide on the track and secure with the original screws or clips; do not force parts into place
• Test the drawer operation before returning contents; recheck alignment and hardware if movement is still obstructed

This replacement cap cover provides the finished trim and a protective snap-on cover for the appliance component. It restores a clean appearance and helps protect the underlying hardware from dust and debris. What it does

• Covers and protects exposed hardware or openings to prevent dust, lint, and debris buildup
• Restores the appliance's finished appearance after a cracked or missing cover
• Helps keep adjacent parts secure and reduces rattling from loose trim
• Fits as a direct replacement designed to snap into the existing mounting points

• One cap cover

• Turn off power to the appliance before starting disassembly to avoid injury
• Usually installs by snapping into place; remove any trim or panels that obstruct access
• Use gentle, even pressure to avoid cracking the new cover; plastic pry tools can help
• If mounting clips are broken, they may need replacement for a secure fit

This door basket is a direct-fit replacement door bin that restores usable storage space on the appliance door and keeps bottles, jars and condiments secure. Durable molded plastic resists everyday wear and water exposure. What it does:

• Replaces a cracked, warped or missing door bin to restore door storage
• Holds bottles and jars upright to prevent spills and clutter
• Secures items behind the door seal so they don't shift when opened
• Matches factory fit and mounting points for reliable operation

• One door basket

• Remove food and items from the door before replacing the bin
• Most installs require only hand tools; handle plastic parts carefully to avoid cracking
• Align tabs and mounting slots, then snap or screw the bin into place per the appliance's factory method

This Door Basket is a replacement door-mounted storage basket that restores inside-door storage and helps keep items organized and accessible. It fits the original door mounting points to return usable shelf space. What it does:

• Provides a rigid storage shelf mounted to the appliance door for bottles, jars, and small containers
• Restores lost or damaged door storage to improve organization and access
• Replaces cracked, broken, or missing door basket that causes items to fall or shift
• Matches original mounting locations for a secure fit when installed correctly

• 1 door basket

• Remove power to the appliance and empty the door before starting work
• Align with existing door mounting clips or screws and secure using the original hardware
• Inspect surrounding door trim and seals for damage during installation

This replacement door basket restores door storage space and keeps bottles, condiments and small containers organized on the refrigerator door. It provides a secure shelf where the original bin is cracked, warped or missing. What it does

• Replaces a damaged or missing refrigerator door bin so items sit securely on the door
• Restores lost storage capacity for bottles, condiments and small containers
• Fits into existing door mounting tracks or snap locations to lock items in place
• Commonly used when the original basket is cracked, broken at the mounts or no longer holds items

• Unplug the appliance or disconnect power before starting any repair
• Empty the door bin and remove any clips or screws holding the old basket
• Align the replacement bin with the door tracks or mounting tabs and press or secure into place until it clicks
• Do not overload the bin; avoid forcing or bending mounting tabs during install

This cover lever replaces a damaged or worn dispenser lever cover to restore a clean, functional surface for pressing the dispenser. Helps keep debris out of the lever area and supports reliable lever actuation. What it does:

• Covers and protects the dispenser lever mechanism from chips, cracks, and debris.
• Provides a smooth contact surface for pressing the dispenser to activate water/ice dispensing.
• Helps prevent leaks or improper actuation caused by broken or warped lever covers.
• Restores cosmetic appearance at the dispenser area when the original cover is cracked or missing.

• Disconnect power and shut off the water supply before beginning any work.
• Removal typically requires accessing the dispenser bezel or door panel—use basic hand tools and retain all fasteners.
• Handle clips and tabs carefully to avoid breakage; test dispenser function after reassembly.

The Basket Assembly, Door is an OEM part for LG refrigerators. It is designed to provide additional storage space within the refrigerator door, making it easy to organize and access items such as bottles, jars, and condiments. The bin has approximate dimensions of 7 3/4 x 13 inches.

Causes of a bad door basket assembly can include regular wear and tear from frequent use, overloading with heavy items, or accidental damage from dropping or mishandling the basket. Over time, these factors can lead to the basket cracking, breaking, or becoming unstable.

Symptoms of a bad door basket assembly include:

• Cracks or visible damage to the basket
• The basket not fitting properly or securely in the door slots
• Difficulty holding items securely, leading to spills or falling items

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

The Door Basket Assembly is an OEM part for LG refrigerators. This part enhances the storage capabilities within the refrigerator door, offering a convenient space for condiments, bottles, and smaller food items. 

Over time, door baskets can experience wear, or become damaged or cracked due to overloading or accidental impact. This can compromise their ability to securely hold items, leading to potential spills or damage to stored goods.

Symptoms of a bad Door Basket Assembly include:

• Cracks or breaks in the basket, compromising its structural integrity
• Difficulty fitting the basket securely onto the refrigerator door
• Sagging or inability to hold items properly due to wear or damage

This OEM LG part is also compatible with some Kenmore models.

This stopper assembly cushions and limits the door travel to prevent slamming and ensure correct door alignment. It restores smooth, controlled closing and helps reduce noise and wear on the door hinge area. What it does:

• Absorbs door impact to prevent hard slams and reduce noise
• Keeps the door from overtravel for consistent alignment
• Helps protect hinge and cabinet edges from damage
• Restores proper door closing feel when worn or broken

• One stopper assembly as shown

• Disconnect power and empty door area before starting repairs
• Access may require removing door trim or inner panel
• Use basic hand tools; avoid forcing the part into place to prevent damage

This bushing is a replacement shaft support that stabilizes a rotating assembly and helps reduce wear and noise. It restores smooth movement and helps maintain proper alignment for the appliance component. What it does

• Supports and centers a rotating shaft or drum to reduce wobble and rubbing
• Reduces noise and friction from worn pivot or support points
• Helps prevent uneven wear on mating parts and prolongs assembly life
• Commonly replaced when you hear squeaking, grinding, or notice excessive play

• One bushing

• Inspect mating surfaces and replace any damaged clips, seals, or fasteners as needed
• Use basic hand tools; hold the assembly steady and press the bushing squarely into place
• If the bushing is press-fit, use a suitable driver or press to avoid damage
• Disconnect power and follow all safety precautions before beginning repairs

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This refrigerator door handle assembly replaces a worn, broken, or loose door grip so you can open and close the fridge smoothly and safely. Designed to match the original fit and restore proper door operation. What it does

• Replaces a damaged or cracked door handle to restore secure gripping and normal door use
• Prevents wobbling or loose fit that can make the door hard to open or close
• Helps maintain proper door alignment and user safety during normal use
• Works with the existing trim and mounting points for a factory-style appearance

• One refrigerator door handle assembly

• Turn off ice/water dispenser and remove any items from the door before starting
• Use common hand tools (screwdriver/hex driver) to remove trim and fasteners; retain original screws if not supplied
• Lift or support the door section per the service manual when detaching heavy trim to avoid damage

This refrigerator door handle restores a secure, comfortable grip and a clean, factory look. Replace a loose, cracked, or broken handle to improve daily usability and keep the door operating smoothly.

• Provides the handhold to open and close the refrigerator door
• Attaches to the door's factory mounting studs/brackets for a solid feel
• Helps maintain exterior appearance and ergonomics
• Common symptoms: handle feels loose or wobbly, cracks, breaks, or goes missing

• Unplug the refrigerator before servicing
• Protect the door finish with tape or a cloth around mounting points
• Align the handle on existing studs/brackets and tighten fasteners per your model's instructions; do not overtighten
• Confirm the handle is secure and the door closes and seals properly

This button assembly replaces the damaged or non-working control buttons on your appliance's control panel to restore reliable user input and improve appearance. It fits into the console and provides the tactile surfaces needed to operate functions. What it does:

• Replaces worn, stuck, cracked, or missing control buttons so inputs register correctly.
• Restores the tactile feel and visual appearance of the control panel.
• Helps resolve symptoms such as buttons that don't respond, stick, or look broken.
• Interfaces with the console so the front buttons transmit commands to the control board.

• Disconnect power (unplug or shut off breaker) before starting to avoid shock or damage.
• Remove the control panel trim carefully to access the assembly; use appropriate screwdrivers and protect surrounding surfaces.
• Note connector locations and orientation before disconnecting; handle wiring and ribbon cables gently.
• Test button function after reconnecting power and before fully reassembling the console.

This rail slide replaces a worn or broken drawer track to restore smooth opening and reliable support for a refrigerator or freezer drawer. It helps the drawer glide smoothly and keeps contents stable during use. What it does:

• Guides and supports the drawer for smooth, linear movement
• Restores even alignment to prevent sticking, binding, or uneven travel
• Reduces rattling and helps the drawer stay fully seated when closed
• Addresses symptoms like a sagging, hard-to-pull, or off-track drawer

• High-level replacement — remove the drawer and fasteners to swap the rail
• Keep small screws and clips organized and reuse original hardware unless replacements are provided
• Wear gloves to protect hands and avoid damaging painted surfaces

This slide rail restores smooth, stable drawer or rack movement so the compartment opens and closes without binding. It replaces a worn or damaged rail to improve alignment and support. What it does

• Guides and supports a drawer or oven/rack for even, controlled sliding
• Reduces sticking, scraping, or uneven travel when opening or closing
• Helps prevent the drawer or rack from sagging or coming off the track
• Works as a mechanical replacement when the original rail is bent, cracked, or worn

• One slide rail

• Disconnect power or unplug the appliance before beginning any repair
• Remove the affected drawer or rack to access mounting screws and clips
• Match rail orientation and secure with the original fasteners; do not overtighten
• Test operation after installation and reassemble any removed components

This connector assembly secures and drives the freezer drawer bar so the drawer opens and closes smoothly. Replaces a worn or broken bar/gear assembly to restore proper drawer movement and alignment. What it does:

• Transfers drawer motion to the slide mechanism so the freezer drawer glides correctly
• Replaces worn or stripped gears that cause slipping, grinding, or uneven movement
• Secures the drawer bar to the internal slide/track to prevent misalignment or sagging
• Useful when a drawer won't open/close smoothly, catches, or rattles during operation

• Disconnect power before servicing and remove stored items from the drawer
• Generally replaces with basic hand tools; support the drawer while detaching and installing the assembly
• Inspect surrounding slide components for wear and replace if needed for reliable operation

This center hinge assembly replaces the middle door hinge on compatible French-door refrigerators to restore proper door alignment and smooth opening. It helps prevent sagging, binding, and air leaks caused by a worn or damaged hinge. What it does:

• Supports and aligns the upper/lower refrigerator doors for correct sealing
• Enables smooth pivoting of the door to open and close without binding
• Corrects uneven gaps or door sag that can cause cooling loss or excessive wear
• Replaces a bent, cracked, or worn hinge that may cause noisy operation

• One center hinge assembly

• Remove power and empty the door(s) before beginning work; follow manufacturer service instructions
• Use proper tools and support the door while removing/installing the hinge to avoid injury or damage
• Inspect surrounding trim and fasteners; replace any worn screws or bushings as needed

This center hinge assembly replaces the factory door pivot and restores proper door alignment and smooth opening. It supports the refrigerator door at the center hinge point to help stop sagging, binding, or uneven gaps. What it does:

• Replaces the center pivot point that supports and guides the door
• Restores correct door alignment and even sealing to help maintain cooling efficiency
• Reduces door sag, sticking, and noise caused by worn hinge parts
• Allows the door to open and close smoothly when operating normally

• Disconnect power to the appliance and remove food from affected door before starting.
• Support or remove the door to avoid injury or damage; the door can be heavy.
• Use appropriate hand tools and follow torque guidelines in the OEM instructions.

This spanner is the specialized hand tool used to turn and hold slotted nuts, collars, or fittings on compatible appliances, making service and adjustments easier and safer. It gives a secure grip for loosening or tightening components without damaging surrounding parts. What it does:

• Fits and turns slotted or notched appliance fasteners and collars commonly used in assemblies
• Helps hold a component steady while you loosen or tighten the mating fastener
• Reduces slippage and tool marks compared with pliers or improvised tools
• Useful during maintenance tasks such as removing retaining rings, collars, or adjustable fittings

• One spanner tool

• Disconnect power and/or gas and follow all safety precautions before servicing appliances
• Use the correct size spanner engagement to avoid slipping or rounding the fastener
• Apply steady force; do not use cheater bars or excessive torque unless specified by the manufacturer

The Flapper Door Spring is an OEM part for LG refrigerators, designed for the ice dispenser's flapper door mechanism. This spring plays a role in ensuring the flapper door opens and closes properly, providing a tight seal when the ice dispenser is not in use.

Over time, the flapper door spring can lose tension or break due to fatigue or corrosion, leading to issues with the flapper door's operation.

Symptoms of a bad Flapper Door Spring include:

• The flapper door on the ice dispenser fails to close completely
• Ice or frost buildup around the dispenser area
• Difficulty dispensing ice
• Increased energy consumption as the refrigerator works harder to maintain its set temperature

This OEM LG part is also compatible with some Kenmore models.

This upper hinge assembly supports the refrigerator door at the top, providing a smooth pivot and proper alignment. Replacing a worn hinge restores even gaps and a tight seal to help maintain consistent cooling performance.

• Supports the door's weight and provides the top pivot point
• Maintains alignment for correct gasket compression and a tight seal
• Helps the door open and close smoothly without rubbing or binding
• Common signs of wear: door sagging or misalignment, rubbing/clicking noises, and poor sealing or condensation around the gasket

• Unplug the refrigerator before servicing.
• Remove the top hinge cover; retain screws and any shims for reuse.
• Support the door with a helper while removing and installing the hinge.
• Position the new hinge, align the door, then tighten screws and verify smooth swing and full gasket contact all around.

Left side upper hinge.

This ice dispenser door assembly opens to release ice and seals the chute when not in use. Replacing a worn flap restores a tight seal to reduce frost buildup and air leaks at the dispenser.

• Seals the ice chute to keep warm air out and cold air in
• Opens during dispensing to allow cubed or crushed ice to pass
• Helps prevent frost/ice accumulation in the chute and around the dispenser
• Common signs of failure: flap won't open/close, visible gap or draft at the chute, frost forming in the dispenser area

• Always disconnect power before servicing the dispenser
• Remove dispenser trim/control panel as directed; disconnect wiring as needed
• Remove mounting screws/clips, swap the assembly in the same orientation, and reuse existing hardware if applicable
• Restore power and test for smooth operation and a proper seal

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This dispenser door link connects the dispenser actuator to the refrigerator dispenser door so the door opens and closes smoothly when dispensing. Replaces a worn or broken link to restore proper dispenser door movement. What it does:

• Transfers motion from the dispenser actuator to the dispenser door so the door opens when dispensing
• Keeps the dispenser door aligned for proper sealing and closure
• Can fail if the door won't open, sticks, or the dispenser lever feels loose or disconnected
• Compatible with dispenser assemblies that use a separate plastic/metal link between actuator and door

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser trim or front housing—keep fasteners organized
• Handle plastic components carefully to avoid cracking; inspect surrounding parts for wear

This holder bracket replaces a damaged or missing mounting support. It secures an internal component so it stays aligned and stable, helping your appliance operate smoothly without looseness or rattling.

• Provides a rigid mounting point to hold a component or assembly in place
• Maintains alignment to reduce vibration, rubbing, and intermittent operation
• Restores support when the original bracket is cracked, warped, or missing
• Common symptoms include a loose/wobbly part, rattling noises, or visible broken tabs

• Disconnect power to the appliance before servicing
• Note the original bracket's orientation and transfer any clips or screws from the old part
• Use existing hardware and tighten fasteners evenly—do not overtighten
• Verify proper fit and alignment before restoring power

The Ice Door Lever Spring is an OEM component compatible with LG refrigerators. It is part of the mechanism that opens and closes the ice door on LG French door refrigerators. Over time, springs can lose resiliency or become misaligned.

Causes may be extensive usage over years or damage like kinking that compromises spring function.

Symptoms of a bad ice door lever spring include:

• The ice door not latching fully when closed
• Difficulty opening or poor balance while moving the door
• The lever rubbing or catching instead of moving smoothly

This OEM LG part is also compatible with Sears/Kenmore side-by-side refrigerators.

This molded plastic funnel directs water inside the appliance to prevent leaks and pooling and helps ensure proper drainage or water delivery. It replaces a damaged or missing funnel to restore correct internal water flow. What it does:

• Channels water from the supply or inlet to the drain or reservoir to prevent overflow
• Helps stop water pooling that can cause leaks or internal water damage
• Restores proper routing when cracked, warped, or broken
• Commonly linked to symptoms like leaks under the unit, water pooling inside compartments, or disrupted ice/water delivery

• One molded plastic funnel

• Disconnect power and shut off the water supply before starting repair
• Inspect mounting tabs and surrounding seals; replace any damaged fasteners or gaskets
• Typically installs by aligning and snapping into place or securing with existing screws — avoid forcing to prevent breakage

This dispenser lever replaces a cracked, loose, or non-returning dispenser paddle so you can reliably activate the fridge dispenser again. Durable replacement that restores normal button/paddle operation and user control. What it does:

• Acts as the user-operated paddle that presses the dispenser switch to release water or ice
• Restores proper lever return and consistent contact with the dispenser switch
• Stops leaks, wobble, or snagging caused by a broken or worn paddle
• Helps eliminate intermittent or failed dispenser activation related to a damaged lever

• One dispenser lever

• Disconnect power to the appliance before starting; shut off the water supply if working near the dispenser
• Remove dispenser bezel/trim and any inner cover per manufacturer instructions to access the lever
• Replace the lever and confirm it moves freely and properly contacts the dispenser switch before reassembling

The Cover Assembly is an OEM part for LG French door refrigerators equipped with electronic display panels. This assembly protects the critical control components governing refrigerator functions.  

Causes of a bad cover assembly include cracks or breaks from impact damage, discoloration or warping due to heat/cold exposure over time, or failure to mount leaving the display vulnerable.

Symptoms of a bad cover assembly include:

• Gaps allowing dust or liquid ingress near electronics   
• Difficulty reading displays clearly through clouded plastic
• Loose or misaligned fit reducing aesthetic appeal
• Cover unable to fulfill its protective function

Replace yours today with this genuine OEM LG assembly to safeguard temperature controls and programming features. A snug, durable cover maintains dependable performance access. This replacement part is also compatible with Samsung, KitchenAid, and GE French door models to restore usability and presentation.

The Cover Assembly is an OEM part for LG French door refrigerators equipped with electronic display panels. This assembly protects the critical control components governing refrigerator functions.  

Causes of a bad cover assembly include cracks or breaks from impact damage, discoloration or warping due to heat/cold exposure over time, or failure to mount leaving the display vulnerable.

Symptoms of a bad cover assembly include:

• Gaps allowing dust or liquid ingress near electronics   
• Difficulty reading displays clearly through clouded plastic
• Loose or misaligned fit reducing aesthetic appeal
• Cover unable to fulfill its protective function

Replace yours today with this genuine OEM LG assembly to safeguard temperature controls and programming features. A snug, durable cover maintains dependable performance access. This replacement part is also compatible with Samsung, KitchenAid, and GE French door models to restore usability and presentation.

The Cover Assembly is an OEM part for LG French door refrigerators equipped with electronic display panels. This assembly protects the critical control components governing refrigerator functions.  

Causes of a bad cover assembly include cracks or breaks from impact damage, discoloration or warping due to heat/cold exposure over time, or failure to mount leaving the display vulnerable.

Symptoms of a bad cover assembly include:

• Gaps allowing dust or liquid ingress near electronics   
• Difficulty reading displays clearly through clouded plastic
• Loose or misaligned fit reducing aesthetic appeal
• Cover unable to fulfill its protective function

Replace yours today with this genuine OEM LG assembly to safeguard temperature controls and programming features. A snug, durable cover maintains dependable performance access. This replacement part is also compatible with Samsung, KitchenAid, and GE French door models to restore usability and presentation.

This replacement lever button is the user-operated push control that lets you engage the appliance's latch or control function. It restores a worn, cracked, or non-springing button so controls respond reliably. What it does

• Acts as the external push/lever used to latch, unlatch, or activate a control mechanism
• Replaces cracked, loose, or unresponsive buttons that no longer engage properly
• Helps restore normal tactile response and alignment of the control assembly
• Works with the existing actuator and mounting points — no modification required

• One replacement lever button

• High-level replacement only; remove power source before starting repair
• Handle panels and clips gently to avoid damage to trim or surrounding controls
• Verify correct button orientation before final reassembly

This button assembly replaces the set of push buttons on the appliance control panel to restore reliable input and a finished appearance. Replaces worn, broken, or unresponsive control buttons so the unit accepts user commands correctly. What it does:

• Provides the user-facing push buttons used to select cycles, options, and start/stop functions
• Restores physical button action for hard-to-press, stuck, or missing buttons
• Helps resolve intermittent or non-responsive control inputs caused by damaged button hardware
• Maintains the original fit and appearance of the control panel

• One button assembly

• Disconnect power before beginning any repair
• Access typically requires removing the control console or top panel—keep fasteners and clips organized
• Handle the assembly carefully to avoid damaging plastic tabs or button contacts
• Test button operation before fully reassembling the console

The Cover Assembly is an OEM part for LG French door refrigerators equipped with electronic display panels. This assembly protects the critical control components governing refrigerator functions.  

Causes of a bad cover assembly include cracks or breaks from impact damage, discoloration or warping due to heat/cold exposure over time, or failure to mount leaving the display vulnerable.

Symptoms of a bad cover assembly include:

• Gaps allowing dust or liquid ingress near electronics   
• Difficulty reading displays clearly through clouded plastic
• Loose or misaligned fit reducing aesthetic appeal
• Cover unable to fulfill its protective function

Replace yours today with this genuine OEM LG assembly to safeguard temperature controls and programming features. A snug, durable cover maintains dependable performance access. This replacement part is also compatible with Samsung, KitchenAid, and GE French door models to restore usability and presentation.

The Cover Assembly is an OEM part for LG French door refrigerators equipped with electronic display panels. This assembly protects the critical control components governing refrigerator functions.  

Causes of a bad cover assembly include cracks or breaks from impact damage, discoloration or warping due to heat/cold exposure over time, or failure to mount leaving the display vulnerable.

Symptoms of a bad cover assembly include:

• Gaps allowing dust or liquid ingress near electronics   
• Difficulty reading displays clearly through clouded plastic
• Loose or misaligned fit reducing aesthetic appeal
• Cover unable to fulfill its protective function

Replace yours today with this genuine OEM LG assembly to safeguard temperature controls and programming features. A snug, durable cover maintains dependable performance access. This replacement part is also compatible with Samsung, KitchenAid, and GE French door models to restore usability and presentation.

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

The Compressor is an OEM part for LG refrigerators. As the primary component that circulates refrigerant to chill the refrigerator and freezer compartments, it is crucial for proper cooling operation. The compressor works with the condenser fan and evaporator coil to regulate temperatures inside the refrigerator. 

Causes of a faulty compressor can include gradual breakdown of motor windings, loss of refrigerant pressure over time, or failure of electrical components vital to operation.

Symptoms of a bad compressor are:  

• Elevated fridge/freezer temperatures unable to be maintained
• Frost patterns indicating poor or insufficient cooling 
• Abnormal vibrations or sounds upon compressor cycling
• Error codes displayed regarding cooling performance

It is also compatible with Sears/Kenmore refrigerator models.  
 

THERMISTOR ASSEMBLY,PTC

The Overload Compressor is an OEM part for LG refrigerators. This part protects the refrigerator's compressor from overheating and potential damage by acting as a safety device. It works by monitoring the compressor's electrical current and temperature. If the compressor operates under conditions that could lead to overheating or overcurrent, the overload protector will cut off the power to the compressor, allowing it to cool down before potentially restarting.

Causes of damage to the Overload Compressor can include power surges, electrical faults within the refrigerator, or a malfunctioning compressor that requires more current than usual to operate. 

Symptoms of a bad Overload Compressor include:

• The refrigerator not cooling properly or not cooling at all
• The compressor failing to start, indicated by a clicking sound coming from the back of the refrigerator where the compressor is located.
• The refrigerator or freezer section warming up

This OEM LG part is also compatible with some Kenmore models.

Replacement front cover that restores your appliance's exterior finish and helps protect controls and internal components from everyday wear, spills, and minor impacts, delivering a clean, finished look and proper front-panel fit. What it does:

• Covers and protects the appliance's front area, helping shield controls and wiring from dirt and moisture.
• Restores damaged or cracked front trim for improved appearance.
• Helps maintain proper alignment and fit of the front assembly.
• Common symptom: cracked, chipped, warped, or loose front panel that exposes internal parts or looks worn.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Basic hand tools (screwdriver set) may be required to remove the old cover and install the replacement.
• Handle edges carefully to avoid cuts; align tabs/clips and secure fasteners snugly but do not overtighten.

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

The Drier Assembly is an OEM part for LG refrigerators. This part is responsible for removing moisture and contaminants from the refrigerant. This ensures that the refrigerant circulates effectively and efficiently, preventing damage to other components and maintaining the refrigerator's cooling performance.

Causes of a bad Drier Assembly can include contamination from moisture entering the refrigerant lines, blockages from debris or particulates, and general wear and tear over time that reduces its effectiveness.

Symptoms of a bad Drier Assembly include:

• Reduced cooling efficiency or warm refrigerator temperatures
• Unusual noises from the refrigeration system
• The compressor running continuously or cycling frequently
• Frost buildup on the evaporator coils due to improper refrigerant flow

This OEM LG part is also compatible with Sears/Kenmore models.

The Fan Assembly is an OEM part for LG refrigerators. It is responsible for circulating air within the refrigerator and freezer compartments, ensuring consistent cooling and optimal temperature distribution. The fan assembly helps maintain the freshness of your food by evenly distributing cold air.

Common causes of a bad fan assembly include electrical issues, worn-out bearings, or obstructions that prevent the fan from spinning properly.

Symptoms of a bad fan assembly include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures within the fridge or freezer
• Frost buildup in the freezer
• Refrigerator running continuously or not cooling effectively

This OEM LG part is also compatible with Sears/Kenmore models.

The Fan and Grille Assembly is an OEM component designed for LG refrigerators. This assembly circulates air within the refrigerator compartment to maintain even cooling temperatures. 

Causes of a bad fan and grille assembly can include failure of motorized fan components over time, buildup of dust or debris restricting airflow, or physical damage to fan blades.

Symptoms of a bad fan and grille assembly include:  

• Development of warm spots within the fridge
• Excessive frost or ice buildup inside 
• Louder than normal operating sounds
• Inability to maintain proper temperature settings

Replace yours today with this genuine OEM LG assembly to restore optimized air circulation for balanced cooling. This replacement assembly is compatible with Kenmore, Frigidaire, and GE refrigerator models. Proper airflow is essential for energy efficiency and food freshness.

The Heater Sheath is an OEM replacement part for LG refrigerators. This component is responsible for defrosting the evaporator coils, preventing frost buildup that can impair the refrigerator's cooling efficiency. The heater sheath ensures that the defrost cycle runs effectively, maintaining optimal performance and energy efficiency of the refrigerator.

Causes of a bad heater sheath can include electrical malfunctions, wear and tear over time, or damage to the heating element itself. These issues can result in the heater sheath failing to activate, leading to frost accumulation.

Symptoms of a bad Heater Sheath include:

• Frost or ice buildup on the evaporator coils
• The refrigerator or freezer section not cooling properly
• Longer defrost cycles or the refrigerator running continuously
• Water leaks inside the refrigerator from excess frost melting

This OEM LG part is also compatible with Sears/Kenmore models.

This magnet-activated switch is a small sensor that tells the appliance when a door or lid is open or closed. Replacing a faulty switch restores proper lighting, door-ajar alerts, and safety interlocks for normal operation.

• Senses a nearby magnet to report door/lid open/closed status to the control
• Helps control interior lights, alarms, fans, and dispenser/ice interlocks on applicable units
• Failure symptoms can include lights staying on or off, false door-ajar beeps, or dispenser/ice disabled
• Common causes: moisture intrusion, damaged leads, or stuck internal contacts

• Disconnect power before servicing
• Access the switch at the door opening (behind trim/control housing or liner, location varies by model)
• Release locking tabs/fasteners, move wiring carefully, and install the new switch in the same orientation
• Restore power and verify operation by bringing a magnet near the switch to toggle

The Dispenser Switch is an OEM part for LG refrigerators. It is responsible for controlling the operation of the dispenser, allowing you to dispense water or ice from the refrigerator door. This switch is located in the dispenser house and activates the dispenser when pressed.

Causes of a bad dispenser switch can include wear and tear over time, electrical malfunctions, or damage due to accidental mishandling or impact.

Symptoms of a bad dispenser switch include:

• Inability to dispense water or ice when pressing the buttons.
• The dispenser works intermittently. 
• No response or delayed response when pressing the dispenser buttons.

This LG part can also be used on Kenmore/Sears appliances. 

The Evaporator Fan Motor is an OEM part for LG refrigerators. This motor circulates air within the refrigerator, ensuring even cooling and maintaining the desired temperature throughout the appliance.

Common causes of failure include wear and tear over time, electrical issues such as power surges, or physical damage from mishandling or impact.

Symptoms of a bad evaporator fan motor include:

• Unusual noises from the freezer or refrigerator compartments
• Inconsistent or insufficient cooling
• The motor not running or running sporadically
• Ice buildup in the freezer due to poor air circulation

This OEM LG part is also compatible with some Kenmore models.

This motor bracket secures and aligns the appliance motor, providing stable mounting and helping reduce vibration for reliable operation. It's a direct-fit replacement when the existing motor mount is cracked, bent, or loose. What it does:

• Provides a fixed mounting point to keep the motor properly aligned with the drive system
• Dampens movement to reduce vibration and noise during operation
• Prevents motor shift that can cause belt misalignment or rubbing
• Restores secure fastener locations for reliable motor performance

• One motor bracket

• Disconnect power (and water, if applicable) before beginning any repairs
• Use the original fasteners or OEM-equivalent hardware to secure the bracket
• After installation, verify motor alignment and run a test cycle to ensure quiet, vibration-free operation

This motor bracket secures the appliance motor to the cabinet, keeping the motor aligned and stable for reliable operation. It's a direct-fit replacement when the original bracket is cracked, bent, or missing. What it does:

• Provides a secure mounting point to hold the motor in proper position
• Maintains motor alignment to prevent vibration, noise, or premature wear
• Helps ensure attachments (pulleys, fans, or gears) stay correctly engaged
• Commonly replaced when the bracket is damaged, rusted, or deformed

• Disconnect power to the appliance before beginning any repair.
• Verify bracket orientation and fastener locations before removal; retain any original screws or clips unless replacements are provided.
• Handle sharp edges carefully and use proper tools; minimal mechanical skill required.
• Inspect and replace those components as needed for a secure repair.

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

• One cover motor

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

Damper motor support secures the damper motor assembly inside the refrigerator, keeping the air-control damper aligned so it opens and closes correctly. Replacing a damaged support restores proper airflow control and reduces noise. What it does:

• Secures and positions the damper motor assembly so the air-control damper moves smoothly.
• Keeps the motor and damper aligned to help prevent rattling, grinding, or loose motor noise.
• Supports consistent airflow between compartments to assist with even cooling.
• Resolve damper movement problems like the damper not opening or closing fully.

• Disconnect power to the appliance before starting work; remove food and shelves as needed for access.
• Remove the interior access panel to reach the damper assembly; handle plastic tabs and clips gently to avoid breakage.
• Align the motor and damper during reassembly and secure all fasteners; test damper operation before replacing panels and shelving.

This damper motor support replaces a broken or warped mount for the refrigerator's air damper assembly. It holds the damper motor and door securely so the system can meter freezer air into the fresh food compartment.

• Secures and aligns the air damper motor/door within the duct
• Helps ensure proper opening/closing of the damper to regulate airflow and temperature
• Damage can contribute to a warm or too-cold refrigerator and inconsistent temperatures
• May cause clicking or buzzing from the damper area or a visibly loose assembly

• Disconnect power to the refrigerator before servicing
• Access the damper behind the fresh food compartment duct/cover; remove shelves as needed
• Note wiring and orientation; transfer the existing damper motor and door to the new support and reuse fasteners
• Ensure the door moves freely and seals before reassembly; restore power and verify airflow

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Replacement handle cap that covers and secures the end of a refrigerator or freezer door handle for a finished appearance and to protect exposed hardware. Restores a clean look and hides fasteners. What it does:

• Covers the exposed end of a door handle to conceal screws and mounting holes.
• Protects handle hardware from dirt and wear.
• Improves the appliance's appearance when an original cap is cracked, broken, or missing.
• Helps prevent snagging on a damaged or loose handle end.

• High-level snap-on or screw-on installation; handle removal may be required for access.
• Use basic hand tools as needed and avoid forcing parts to prevent damage.
• Confirm fit and finish before final installation.