Kenmore Refrigerator 253.57184603 (25357184603, 253 57184603) Parts

I ordered new hangers and was able to install them within a period of 5 minutes. Super easy! Read more

Gotta love the inter-webs and youtube.com I did a couple of searches and some troubleshooting. Everything pointed to the damper assembly and thermo so I ordered them as well as the new versions of the flimsy plastic drawer shelves, while I was working out of state during COVID. I had the parts waiting for me at the house. Rolled in Sunday, 22 minutes later, damper and thermo installed. The fridge is cooling. Today is Tuesday and everything is back down to temp. knuckle bump. Read more

I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more

Got the six year old refrigerator from my daughter because of it freezing up but was in good ( Stainless Steel) shape to replace our 21 year old Kitchen Aid. The thermistor had been replaced as a cheap first step but didn't correct the problem as it totally froze over within five days. I decided to tear down again and check the defrost heater element which was found to have an open circuit and hence the replacement part. Thanks to AAP, I ordered the part at the weekend, was shipped on Monday... Read more

We replace them I order wed moring and I got Thursday afternoon I was very happy got them quick Read more

Looked at the chart for my frig model they all replaced easily!! I’m so happy and grateful for the service and products!! My frig is as good as new and the parts came within one day!!! Beautiful experience!! I highly recommend this company they are the best!! Read more

FIrst, I removed the cardboard cover on the back, exposing the compressor compartment. I noticed the fan was not moving. I touched the blade and it immediately started spinning, but not very fast. The compressor was getting hot, and I think prob. overheating. The fan stopped after a few hours and then "froze" solid the next day. I got the parts and I followed the process in the video to replace the fan. VIdeo was right on the money. but there were some difficulties. The retention clip on the... Read more

Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more

Looked at the provided video. PERFECT results. Read more

• Door won't open or close
• Door sweating
• Clicking sound

I went to Appliance Parts Pros and watched a few videos. Ordered the door closer plate and door hinge bearing. Removed all of the door bins and contents. Removed four screws total. Lifted the door off of the hinge, replace the two parts on the bottom hinge. Put the door back on the hinge with a little silicone on the new parts. Replaced all of the screws and no more popping. It took more time to clean all of the door bins than to fix the hinge. The video was 100% accurate. No surprises. Read more

• Door sweating
• Door won't open or close

Replaced the lower hinge bearing and lower door cam on fridge side. Read more

• Ice maker dispenses too much ice

Replaced the housing Read more

• Noisy

No local refrigeration house had one. APP did! I got it in 2 days. Everything is A OK. Read more

I had the original sensors in my Frigidaire, which were now about 18 years old. The water dispenser would work, but I would have to push in the lever and then draw it back until it found that "sweet spot." I finally got annoyed enough with the problem that I looked online. I almost purchased the dispenser actuator (the paddle), and glad I didn't because it was not the problem. Unless your lights are out, or it broke, the culprit will be these little dispenser switches which get pressed... Read more

Replaced solonoid. Video was very helpful. Parts came in the time frame given when I ordered the part. (1.7 days). Without the video I would have called a repairman. Thanks . Read more

I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more