Parts for Kenmore Elite 79574309810: Refrigerator Parts

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Mounting screw secures panels, brackets, and interior components in your refrigerator. Replace stripped, missing, or damaged fasteners to prevent rattling.

Replacement mounting screw for refrigerators. Secures internal components and panels. Order when original hardware is stripped, lost, or damaged.

Secure refrigerator panels, brackets, and internal components with this replacement mounting screw. Ideal for missing, stripped, or damaged fasteners.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.

Secures panels, brackets, and components inside your refrigerator. Replace this fastener if worn, missing, or stripped to restore proper assembly.

Replace cracked or broken handle trim on your refrigerator. This cosmetic trim piece covers the handle mounting area and restores a clean appearance.

Replacement door handle for refrigerators. Installs on the exterior door. Replace when your original handle is cracked, broken, loose, or missing.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Fix a refrigerator that won't run or has stopped working with this DC motor assembly. Restores motorized operation when the main drive motor fails.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Refrigerator shelf roller assembly that attaches to pull-out shelves for smooth gliding. Replace if rollers are cracked, broken, or wheels no longer spin freely.

Replacement freezer tray for refrigerators. Organizes and stores frozen foods in the freezer compartment. Replace if cracked, broken, or damaged.

Drawer tray assembly forms the shelf base for slide-out bins in your refrigerator. Replace if cracked, warped, or broken to restore stable storage.

Replacement freezer drawer tray assembly for bottom-mount refrigerators. Installs in freezer section for organized storage. Needed when cracked or broken.

Replacement freezer tray for refrigerators. Organizes and stores frozen foods in the freezer compartment. Replace if cracked, broken, or damaged.

Replace a cracked, broken, or missing net shelf in your refrigerator door. This mesh-style storage shelf installs on the door to organize items.

Mesh shelf net for refrigerator door or interior shelves. Secures bottles, cans, and small items. Replace when torn, sagging, or missing.

Replace a cracked, broken, or missing refrigerator glass shelf. This tempered glass shelf assembly installs inside your fridge to restore storage.

This rail holder secures the drawer glide rails in your refrigerator. Replace if the holder is cracked, broken, or missing, causing drawer instability.

Secures rails or guides in your refrigerator to keep racks and sliding components aligned. Replace if clip is broken, cracked, or missing to restore fit.

Replacement fresh room tray assembly for your refrigerator's deli/snack drawer. Restores organized storage when the original bin is cracked or missing.

Telescopic rail guide assembly for smooth freezer drawer sliding. Replace if drawer sticks, wobbles, or won't extend fully. Verify fit by model number.

Slide rail for refrigerator freezer drawers. Supports the drawer and enables smooth in-and-out sliding. Replace if broken, cracked, or causing instability.

Freezer drawer rail assembly for refrigerators. Supports and guides the freezer drawer for smooth sliding. Replace when rails are broken, cracked, or worn.

Right-side support rail for refrigerator freezer baskets. Replaces cracked, broken, or worn rails causing baskets to slide poorly or fall off track.

Left-hand support rail for bottom freezer baskets. Replace this plastic slide rail if cracked, broken, or missing to restore smooth drawer operation.

Replaces cracked or warped tray cover that supports refrigerator bins. Restores a level surface to keep items stable and allows drawers to glide smoothly.

Replacement vegetable crisper drawer assembly for bottom-mount refrigerators. Restores fresh food storage when original drawer is cracked or broken.

Vegetable crisper drawer tray assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing produce drawer. Mounts in lower compartment.

Supports and aligns refrigerator drawers for smooth sliding. Replace when worn, cracked, or broken to restore proper drawer alignment and operation.

Support rail that guides your refrigerator crisper drawer for smooth sliding. Replace if rail is cracked, broken, or rollers are worn or missing.

Outer housing for the Magic Room compartment. Replaces cracked or damaged case that prevents proper shelf support and secure mounting of interior components.

Fix refrigerator door misalignment or poor sealing with this door alignment magnet. Restores magnetic retention to keep panels and components secure.

Freezer door foam insulation assembly for bottom-mount refrigerators. Replaces damaged, compressed, or missing foam that affects door seal integrity.

Seals freezer door to maintain proper temperature. Replace if cracked, torn, or not sealing properly causing frost buildup. Confirm fit with your model.

Replace a cracked, broken, or missing refrigerator door basket. This bin mounts to the inner door to organize and hold bottles, condiments, and small items.

Covers and protects the refrigerator door hinge area. Replace if your hinge cover is cracked, broken, or missing to restore a clean appearance.

Seals the refrigerator door to maintain proper temperature and reduce energy loss. Replace if worn, torn, or not sealing tightly. Verify fit with your model.

Seals your refrigerator door to prevent air leaks and maintain temperature. Replace when torn, cracked, or loose to restore efficiency. Verify fit.

Replaces the damaged or worn front-facing plate on your refrigerator. Direct-fit exterior panel for units with cracked, dented, or missing front surfaces.

Sliding rail that guides refrigerator drawers for smooth opening and closing. Replace if drawers stick, sag, or come off track. Verify fit by model.

Door basket assembly for refrigerator door storage. Replaces cracked, broken, or missing baskets. Hooks attach to door knobs for secure mounting.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Refrigerator door shelf bin installs on the refrigerator door for storing condiments and beverages. Replace if cracked, broken, or damaged.

Replacement door shelf bin for refrigerator doors. Holds bottles, jars, and condiments. Replace if cracked, broken, or damaged. Installs on door interior.

Door stopper assembly for bottom-mount refrigerators. Installs on door to limit opening range. Replace if cracked, broken, or missing for proper fit.

Door stopper assembly for bottom-mount refrigerators. Prevents door from swinging too far or slamming. Replace if cracked, broken, or missing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replaces worn or broken lower door hinge that no longer provides proper tension. Installs at the bottom center of French door refrigerators to pivot and support the door. Essential for smooth door operation and proper seal.

Shelf rail connector for refrigerators. Secures and aligns shelf rails inside the fresh food compartment. Replace if cracked, broken, or missing.

Drawer rail connector for bottom-mount refrigerators. Secures drawer glide rails to the cabinet frame. Replace if cracked, broken, or missing to restore drawer stability.

Drawer slide rail for refrigerator drawers and bins. Replaces cracked, broken, or worn rails that prevent smooth drawer operation. Mounts inside cabinet.

Replacement slide rail for refrigerator drawers. Installs along the drawer track to guide smooth in-and-out movement. Replace when bent, worn, or broken.

Restores smooth drawer movement in your refrigerator. Replace when drawers stick, wobble, or become misaligned. Confirm fit with your model number.

Replaces a broken or worn guide rail that keeps your refrigerator drawer aligned and sliding smoothly. Restores proper tracking if rails are cracked or missing.

Replacement door hinge assembly for refrigerators. Supports and pivots the door for smooth operation. Replace if bent, worn, or broken to restore alignment.

Freezer drawer slide rail for refrigerators. Installs inside the freezer compartment to support smooth drawer operation. Replace if cracked or broken.

Supports and guides the lower freezer drawer for smooth opening and closing. Replace if rail is cracked, broken, or drawer no longer glides properly.

Replacement door bar for bottom-mount refrigerators. Installs on the interior door to hold items in place. Order a new one if cracked or broken.

Ice maker won't eject ice cubes? This drive gear transfers motor power to rotate the ejector arm and harvest ice. Simple repair restores ice production.

Secures and aligns your refrigerator door for stable movement and proper sealing. Replace if door sags or doesn't close correctly. Confirm fit with model.

Center hinge assembly mounts between refrigerator and freezer doors on bottom-mount units. Replace if cracked, bent, or doors sag and don't align properly.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Fix doors that won't close properly or mechanisms that stick with this tension spring. Restores correct alignment in refrigerator components.

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:

• Supports the refrigerator door and allows it to pivot smoothly.
• Replaces worn, bent, or damaged hinges that cause door sag or misalignment.
• Helps reduce noisy or grinding door operation when the hinge is failing.
• Promotes an even door seal to help maintain internal temperature consistency.

• Unplug the appliance and remove food from nearby shelves before starting work.
• Support the door while removing hinge fasteners to prevent dropping or damage.
• Reinstall using the original hardware; align the door and tighten fasteners securely but avoid overtightening.

Duct cap assembly for bottom-mount refrigerators. Covers and secures ductwork in the air circulation system. Replace if cracked, broken, or missing.

Restores tension to lever mechanisms in refrigerators. Replace when lever sticks, slips, or fails to return properly. Verify fit with your model number.

Lever won't return or latch securely? This tension spring restores proper lever movement and engagement. Small repair that fixes loose or non-functioning levers.

Microwave door won't latch or release properly? This lever holder bracket secures the door lever assembly to restore smooth door operation. Easy DIY fix.

Replacement wire harness connector for refrigerators. Restores secure electrical connections between wiring and control components. Needed when damaged or worn.

Replaces a damaged, cracked, or missing exterior cover panel on your refrigerator. Restores appearance and protects internal components from dust.

Molded trim piece that snaps over the refrigerator door hinge. Replace if cracked, broken, or missing to restore appearance and protect hinge area.

Plastic cover cap that conceals and protects the hinge assembly on your refrigerator door. Replace if cracked, broken, discolored, or missing for a clean finish.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Fix a too-cold fridge or freezing food with this air damper assembly. Controls airflow between compartments to restore proper temperature balance.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Refrigerator not cooling properly? This condenser coil assembly releases heat to keep your fridge cold. Professional installation recommended for evacuation.

Freezer not cooling or building excessive frost? This evaporator coil assembly absorbs heat to maintain proper temperatures. Restores effective cooling.

Fix refrigerator not cooling or freezing issues with this evaporator assembly. Essential component for proper temperature control in bottom-mount models.

Refrigerator not cooling properly or running constantly? This thermistor assembly monitors temperature and signals the control board. Moderate DIY repair.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Refrigerator not cooling evenly or making loud fan noise? This air guide directs airflow from the blower to restore proper cooling. Simple 15-minute fix.

Water pooling inside your refrigerator? This drip tray collects condensate and defrost water to prevent leaks. Direct-fit replacement part.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Drain tray assembly for bottom-mount refrigerators. Collects defrost water beneath the unit. Replace if cracked, broken, or leaking onto the floor.

Water pooling under your refrigerator? This drain tray assembly collects condensate and directs it properly to prevent leaks and water damage.

Front cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior cover panels. Essential for restoring appearance.

Refrigerator making unusual grinding noises or exposed machinery? This machinery cover assembly shields internal components from debris and damage.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix uneven cooling or frozen food in fresh food section with this refrigerator air damper. Controls airflow between compartments to balance temperatures.

Fix loud grinding noise or warm freezer with this evaporator fan assembly. Circulates cold air between compartments. 15-minute repair for most DIYers.

Freezer frosting over or refrigerator not cooling? This defrost control assembly regulates the defrost cycle to prevent ice buildup. Moderate DIY repair.

Fridge won't cool or evaporator coil freezing over? The defrost control assembly regulates cooling and defrost cycles. Moderate DIY repair.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Fix a refrigerator not cooling properly or displaying ER RF codes with this evaporator fan motor. Ensures even cooling throughout your fridge. DIY repair.

Replace your refrigerator's light cover lens to restore proper illumination and protect the bulb. Fits if your dome light lens is cracked or yellowed.

Refrigerator light bulb cover protects the interior bulb from moisture and damage. Replace if cracked, yellowed, or broken to restore proper lighting.

Fix unusual noise or vibration from your refrigerator with this motor bracket. Secures the motor assembly for quiet operation. DIY-friendly repair.

Refrigerator light bulb cover protects the interior bulb from moisture and damage. Replace if cracked, yellowed, or broken to restore proper lighting.

Replace a damaged or broken motor cover in your refrigerator. This protective cover shields the motor assembly from dust and debris. Simple repair.

Refrigerator motor bracket secures the compressor or fan motor in place. Fixes excessive vibration or rattling noises. Moderate DIY repair.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Fix freezer light staying on or not turning on when door opens. This magnetic reed switch detects door position. Located on freezer wall, easy DIY.

Fix a refrigerator that won't turn off the light when the door closes with this door switch cover. Simple repair that takes about 15 minutes to complete.

Hearing rattling or vibration noises from your refrigerator? This motor bracket assembly secures and aligns the motor to reduce noise and prevent shifting.

Fix frost buildup and poor cooling with a new defrost heater. Melts ice from evaporator coils during automatic defrost cycles to maintain stable temps.

Freezer not defrosting or frost building up? This defrost heater melts ice off evaporator coils so cold air flows properly. DIY repair in 30-45 minutes.

LED light assembly for bottom-mount refrigerators. Replaces broken, dim, or non-functional interior lighting module. Installs in fresh food compartment.

LED light assembly that mounts in the freezer compartment to illuminate the bottom drawer. Replace if the light housing is cracked, broken, or missing.

Replaces worn LED backlight strip in your refrigerator display. Restores screen brightness and clarity when images appear dim or uneven. Verify fit with your model number before ordering.

Illuminates refrigerator interior when door opens. Replace when light dims, flickers, or fails to restore bright visibility. Verify fit by model number.

Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.

Power cord for bottom-mount refrigerators. Connects your refrigerator to the electrical outlet. Replace if cord is frayed, damaged, or missing.

Refrigerator not responding to controls or shutting off randomly? This power control board restores main electronic functions and power distribution.

Fix a non-responsive display or control panel that won't respond. This power control board assembly restores proper operation. Moderate DIY repair.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

Display not lighting up or buttons unresponsive? This control board assembly powers and controls your refrigerator's user interface and touch controls.

This display case assembly is the outer housing that holds and protects the appliance control display and buttons, restoring a clean, functional control area and covering internal electronics. It replaces damaged or cracked control-panel housing to improve appearance and button access. What it does:

• Houses and secures the control display, touchpad/buttons, and associated electronics
• Protects display components from spills, dust, and impact damage
• Keeps button/touchpad alignment for reliable user input
• Restores a finished look when the original panel is cracked, warped, or broken

• One display case assembly (housing) — as shown

• Disconnect power before starting service to avoid shock or damage
• Handle display window and ribbon/connector areas carefully to avoid scratching or harming electronics
• Installation typically requires removing the control panel trim and a few fasteners; keep hardware for reuse
• Verify ribbon cable and connectors are fully seated and test functionality before reassembly

Light bulb socket case for your refrigerator. Replace when the socket is cracked, melted, or fails to power the interior light. Verify fit by model number.

Fix a blank or unresponsive refrigerator display with this power control board. Restores touch controls and LED functions. Moderate DIY repair.