Dishwasher Control Panel Lcd Parts

This electronic control board is the appliance's central controller, managing critical functions and timing. Replacing a failed board restores proper operation, responsive controls, and consistent performance when the unit is unresponsive, shows errors, or behaves unpredictably.

• Processes user commands and internal signals to run cycles as designed
• Controls or communicates with motors, valves, fans, and heaters through onboard components
• Manages timing, temperatures, and safety checks programmed by the manufacturer
• Symptoms of failure: won't power on or start, dead or erratic controls, error codes, intermittent operation

• Disconnect power to the appliance before servicing; also shut off gas/water
• Use anti-static precautions and handle the board by its edges
• Photograph connections; transfer connectors one at a time to the new board; secure in the original mounting
• After installation, follow your model's tech sheet for any required initialization/diagnostics and verify normal operation

This lower front toe kick panel restores a clean, finished look at the base of the dishwasher and helps shield the bottom area from debris and bumps. Replace a cracked, dented, or missing panel to secure the opening.

• Covers and conceals the lower access opening at floor level
• Helps protect base components from accidental contact and household debris
• Restores appearance when the original panel is damaged or missing
• Common symptoms: visible gap at the bottom front, loose or rattling kickplate, bent or broken panel

• Disconnect electrical power before servicing
• Open the door to access and remove the mounting screws holding the old panel
• Position the new panel, align tabs/slots, and reinstall screws—do not overtighten
• The panel clears the floor and does not interfere with door operation

Color: Black. Other colors: For white use WP3369614.

This part is a tactile control assembly kit that is used on a dishwasher. The tactile control assembly is the system that uses touch to make adjustments. For example, the buttons are connected to this tactile control assembly, and when the buttons are pressed, it is activated. A new tactile control assembly kit may be needed if the dishwasher keypad is entirely unresponsive when the buttons are pressed. If this is the case, the dishwasher will not be able to be used at all. The replacement process is relatively easy and takes anywhere from 30 to 60 minutes to complete. A screwdriver will be needed for the replacement.This tactile control assembly is a genuine General Electric part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific tactile control assembly is compatible with dishwashers that are manufactured by the General Electric brand.

Color: Black

This keypad is the membrane switch mounted behind the dishwasher's control panel. It registers your button selections and sends them to the electronic control, helping restore consistent response when keys are unresponsive, intermittent, or require excessive pressure. What it does:

• Registers cycle, option, and Start/Reset inputs on the console
• Sends those selections to the electronic control for proper operation
• Failure symptoms include: some or all buttons not responding, needing to press very hard, erratic input, or the cycle not starting from the console
• Can also present as stuck/continuous key input or random beeping

• 1 keypad

• Disconnect power at the breaker before servicing; the control console contains live voltage
• Open the door and remove inner-door screws to access the control console
• Note ribbon-cable orientation; insert straight and fully into the board connector without creasing the flex
• Handle electronics with dry hands and ESD care; reassemble without overtightening screws

Made by Bosch. Common program control module for Bosch dishwashers SHU53/68. NOTE The manufacturer has redesigned the cover and indicator lights. Lights may be covered by the plastic case. You may have to remove the square covers over the indicator lights if needed. The same case is used for 6 and 8 indicator light models. They also no longer use the red bulb indicator lights, small surface mounted lights are used instead. If you require the Jumper Wire that goes with certain models, the part number is 00167782.

The electronic control board is the appliance's main control module. It interprets inputs from the user interface and sensors, then powers and times key components to run each cycle. Replacing a failed board restores reliable, predictable operation.

• Coordinates cycle sequencing and powers components through onboard relays
• Receives signals from switches/sensors and manages overall operation
• Common failure symptoms: unresponsive controls or no power
• Won't start, stops mid-cycle, or won't advance through a cycle
• Intermittent operation, flashing lights, or fault/error codes tied to the main control

• Disconnect power at the breaker before servicing; verify the unit is de-energized
• Use ESD protection; handle the board by the edges to avoid static damage
• Photograph/label wiring and move connectors one at a time to the matching terminals
• After installation, run the appliance's diagnostic/test cycle to confirm proper operation

Color: White

The Electronic Control is an OEM part for Whirlpool dishwashers. It is the main circuit board that regulates all electrical functions and directs components during cycles. Sensors throughout the dishwasher relay information to the control board, which processes data and generates output signals to control mechanisms such as wash motor, heater and dispensers.

Causes of a bad electronic control include failures from long-term, continuous usage overload, issues due to power fluctuations or surges that disrupt circuitry.

Symptoms of a bad electronic control include: 

• Fault codes displayed 
• Lights, buttons or other functions malfunctioning
• Inability to start cycles or advance through phases
• Irregular cycle times, temps or abnormal sounds  

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and Kenmore models. 

Color: Ultimate Silver

The Panel-Facia is an OEM part for Bosch dishwashers. It is the front facing decorative facade that gives the integrated appearance.

Causes of a bad panel-facia can include cracks, chips or other physical damage affecting the high-gloss finish from everyday use over time. Exposure to heat or chemicals during cleaning could accelerate deterioration as well.

Symptoms of a bad dishwasher panel-facia include:

• Dull or uneven appearance on the stainless steel surface
• Visible damage like cracks or fractures
• Potential leaks if the integrity is compromised
• Facade not securely mounting onto the dishwasher frame

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This electronic control board kit is the appliance's central controller, coordinating inputs and powering key components. Replacing a failed board restores proper operation, responsive controls, and reliable cycle management. What it does:

• Manages timing and power to motors, valves, heaters, fans, and other loads
• Interprets sensor and user-interface signals to start, run, and end cycles correctly
• Common failure signs: dead or unresponsive controls, cycles that won't start/finish, repeated error codes, or intermittent operation
• Helps address issues caused by power surges or board damage

• 1 electronic control board (module)

• Disconnect electrical power to the appliance; turn off gas/water if applicable
• Use ESD protection and handle the board by its edges
• Photograph wiring; transfer connectors one at a time and match any jumpers/DIP-switch settings from the original board
• Restore power and perform any model-specific tests or programming per OEM instructions

The Console Assembly is an OEM part for Frigidaire dishwashers. As the control interface, it houses buttons and lights to program wash cycles and monitor status. The assembly covers and protects internal control boards.

Symptoms of a bad console assembly include:

• Non-functioning or unresponsive buttons  
• Water intrusion behind surfaces
• Cracks, chips, or clouding that compromise appearance
• Inability to power on the dishwasher

Causes can be normal wear and tear over time, accidental impact damage, or moisture-related issues. Periodic cleaning helps prevent deterioration. 

This OEM Frigidaire replacement console assembly is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore branded dishwashers. 

This control panel replaces the front console that houses the buttons and indicator lights on your dishwasher. It restores a clean look and responsive inputs so you can select options and start cycles reliably again.

• Provides the user interface for cycle selection, Start/Cancel, and options
• Sends keypad inputs to the main control board for proper operation
• Displays status/option indicators where applicable
• Replaces cracked, faded, or unresponsive consoles to improve usability

• Disconnect power to the dishwasher before servicing
• Open the door and remove inner-door screws to release the console from the door
• Support the wiring; transfer any clips/trim and reuse existing hardware as required
• Avoid pinching the ribbon cable and verify button function before final reassembly

Color: White