Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement spring for the flapper between French refrigerator doors. Installs in the lower hinge to close the gap automatically. Needed when broken or missing.
I thought fixing this door would be too difficult/expensive, so I just spent a week manually closing the flap myself each time I closed the frig. Then I googled the model number of the frig just for fun. The first result was AppliancePartsPros.com, I clicked ONE SINGLE TIME and I arrived at this site, with the exact part I needed listed at the top, and a repair tutorial video that played beautifully with one more click. In the span of two total clicks, I saw how to fix the frig, and I saw... Read more
Spring sleeve for French door refrigerators. Installs in the left door to support the automatic mullion flap mechanism. Replace if cracked or missing.
If your refrigerator has ice buildup on coils or water under crisper drawers, the defrost thermostat may have failed. DIY-friendly repair part.
Poped off plastics caseing inside the frigerator. Unscrewed 4 screws holding black fan inplace. Followed yellow wire to locate white sensor. Need to be careful not to break styrofoam, don't force it, it should seporate from plastic easy as long as the 4 screws are out. Swap it for the new one and button it back up. While I was in there I replaced the defrost sensor and the other sensor next to the heating rod. Also I know there is an issue with drain hole plugging up with ice so I extended the... Read more
Ice maker stopped working or making loud popping sounds? This assembly restores ice production. DIY-friendly repair—just unscrew, unplug, and swap.
Since I could not find the correct thermistor from the schematic provided, I ordered the thermistor harness for the evaporator. I cut the harness and spliced it to the sheared thermistor wires on the roof of the freezer compartment. It now works fine with a little "farmer ingenuity" help. Samsung was absolutely no help at all, but the guy that I spoke with over the phone at APP sure was. This site is now my "go to" for appliance parts! Tip for others with this model. Do not overfill the upper... Read more
Ice overflowing the bin? A broken ice maker shut off arm can't detect full ice levels. Simple DIY fix with one Phillips screw. Video guide included.
I heard a cracking sound so I opened the freezer again and found that it was s piece of plastic -- a small bar -- that had broken off of something. I went online, first to identify the broken part. It was the ice guide. I had to do a bit more research to find out what the ice guide does, as well as the part number. I found it easily on appliancepartspros.com. (I think I purchased a new heating element for my electric oven from you and was able to fix it VERY easily. I was hoping this new repair... Read more
Fix freezer ice buildup & fridge not cooling. This temperature sensor regulates cooling cycles. DIY-friendly repair, takes about 45 minutes to install.
Replaced the inside back panel which comes with a new fan. Seems the old fan had stopped working due to ice which burned it out. The drain tube was blocked and ice built up on the bottom plate. Using a basting tube from Walmart and hot water I thawed out the ice in the tube. The basting tube became much like a toilet plunger and cleared the line rapidly. Nothing else worked as fast. I then bought a one foot long piece of thin solid copper wire from Lowes and stripped the insulation off. I... Read more
Ice maker producing broken cubes or leaking? The ice cube tray often cracks over time. Simple DIY repair—remove 2 screws, unplug, and replace. Video guide.
The amount of water being dispensed into the ice cube tray was excessive, causing overflow of the tray. The water then ran into the collection bin and even down the side walls of the freezer creating a huge block of ice in the bin, and ice all over the lower shelves as well. The excessive build up of ice caused the cube tray to crack and also split the little silicone water grommet that connects to the water delivery tube which directs water into the cube tray. Look out for that little tube... Read more
Ice buildup in freezer or fridge compartment? A faulty defrost thermostat prevents proper defrosting. Moderate DIY repair—test resistance first.
I replaced all three sensors behind the Defroster cover since I was not able to test them. Problem solved. Read more
Replaces broken or missing handle mounting stud that secures refrigerator door handles. Installs into door to hold handle firmly in place.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
Securely houses your refrigerator's water filter for clean, purified water. Replace if leaking after filter changes or cracked from wear. Confirm fit by model.
After looking online and discovering that others who had used a knockoff brand filter to "save money" had the same problem, I concluded the only solution was to replace the filter housing. Found the one I needed on AppliancePartsPros.com. Most important to me was the video explaining how to replace the filter housing - it made the task a snap to complete. The price was also competitive with other sources. Shipping was half that charged by Samsung. Not only was it cheaper, but it was also super... Read more
Flipper assembly that installs vertically on the French door liner to seal the center gap. Replace if cracked, broken, or no longer closing properly.
Looked at new part and realized there were only 2 screws that held the flap onto the door. Removed 2 caps off of screws with small knife and saved them. Removed 2 screws and the flap fell off into my hands. Disconnected wire harness. Connected wire harness for new flap and carefully pushed harness back into recess in door. Put screws back with caps. Closed the door to test and another wonderful job completed by homeowner! Read more
Replaces cracked or clogged drain cap assembly in refrigerator compartment. Installs behind rear wall to prevent water buildup under crisper drawer.
Found one of the drain valves was clogged causing condensation to overflow on the floor behind the refrigerator. Order the parts on Monday morning and they arrived tuesday afternoon. Replace both of the valves in 15 minutes. Easy repair and save a bundle over a service call. Read more
Fix water pooling under crisper drawers or ice buildup on coils. This bracket secures the defrost heater to prevent drain freezing. DIY repair in 5 minutes.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Refrigerator compressor won't start after power surge? This overload protector prevents electrical damage to your compressor. DIY repair in 30 minutes.
Took a bit to diagnose. First tried cleaning coils but the problem still persisted. Next took of the back panel and put the system into diag mode. (Press energy save button and fridge button for eight seconds system ding once a second and inverter board red LED will blink a code or be on solid if no issue. See back of the refrigerator for a sticker with what the number of blinks means. My unit one blinking 1 time. So I measured the resistance of the compressor between windings (8.9 ohms between... Read more
Fix warm fridge temps and ice buildup with this evaporator fan motor. Common when fan makes grinding noise or stops running. DIY repair in 2-3 hours.
I took all the items out of the refrigerator. Removed the screws that hold the cover over the evaporator motor. Than for three hours used a hair drier to remove ice. The panel was frozen on if you pull on it it will break. Soaked up all the water removed the panel and took the fan blade off. That was difficult because it looks like a regular screw head however, you need to push in that which will cause it to release the blades and than push it onto the new motor. Than replace the panel put the... Read more
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more