Gde21dmkes Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Ge part

Defrost Thermostat

4.8 (19)

By: Ge

Part Number: WR50X10069

The Defrost Thermostat is an OEM part for GE refrigerators. It plays a crucial role in the defrost system by monitoring the temperature of the evaporator coil and ensuring that it stays within the optimal range to prevent frost buildup.

Over time, the defrost thermostat can fail due to normal wear and tear, electrical issues, or exposure to moisture. If the thermostat is not functioning correctly, it can lead to excessive frost buildup or the refrigerator not defrosting properly.

Symptoms of a bad defrost thermostat include:

Frost buildup on the evaporator coils
The refrigerator or freezer not cooling efficiently
The defrost heater not activating
Unusual temperatures in the refrigerator or freezer compartments

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Freezer at 27 degree "f" and frig at 56 degree "f" too warm Jorge A. • El Paso , TX • May 20, 2018

I am a home owner with no technical experience on doing refrigerator failures diagnostic/repair. So, I look for internet DIY type of help describing the symptoms. I found recommendations from Appliance Parts Pros going from the easy to the complex potential parts failures and decided to order the compressor start relay and the compressor overload. While waiting for the overnight delivery, came to my mind and decided to look to the freezer compartment and found frost all along the coils panel.... Read more

$17.95

Compare At:: $21.38
You Save:: $3.43

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Compressor Start Device

4.9 (36)

By: Ge

Part Number: WR07X10131

The Overload PTCR Combo is an OEM part for GE refrigerators. It is designed to protect the compressor from electrical overload, ensuring reliable performance and extending the life of the appliance. This part combines the functions of a positive temperature coefficient resistor (PTCR) and an overload relay.

Causes of a bad overload PTCR combo can include electrical surges, wear and tear over time, or internal component failure. A malfunctioning overload PTCR can lead to compressor issues and inefficient cooling.

Symptoms of a bad overload PTCR combo include:

The refrigerator not cooling properly
The compressor not starting or frequently cycling on and off
Unusual clicking noises from the compressor area
The refrigerator running continuously without cooling effectively

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Compressor did not start Thomas C. • Lavallette , NJ • December 05, 2014

WENT TO YOUTUBE FOUND OUT HOW TO TEST THE COMPRESSOR IT TESTED GOOD SINCE IT WAS NOT THE COMPRESSOR I ORDERED THE PARTS THAT WOULD MAKE IT WORK AGAIN - THE CAPACITOR & OVERLOAD PTCR COMBO I INSTALLED THE PARTS NOW I HAVE A FRIG. THAT'S WORKING AGAIN.AT A FRACTION OF THE COST TO REPAIR- THANK'S TO YOUTUBE. Read more

$41.95

Compare At:: $49.50
You Save:: $7.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Evaporator Fan Blade

4.7 (54)

By: Ge

Part Number: WR60X30922

The Evaporator Fan Blade is an OEM part for GE refrigerators. This fan blade is crucial for circulating air over the evaporator coils, which helps to maintain an even temperature throughout the refrigerator and ensures efficient cooling.

Common causes of a bad fan blade include regular wear and tear, damage from ice buildup or debris, and mechanical issues that cause the blade to crack or warp. A compromised fan blade can lead to poor air circulation, resulting in uneven cooling and potential frost buildup.

Symptoms of a bad evaporator fan blade include:

Unusual noises coming from the freezer compartment
Inconsistent temperatures within the refrigerator or freezer
Frost buildup on the evaporator coils
Reduced cooling efficiency

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Evaporator fan started making loud noise from blade hitting shroud Kerry M. • Englewood , CO • October 03, 2016

Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more

$72.77

Compare At:: $85.87
You Save:: $13.10

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Rear Drum Support Shaft

4.9 (23)

By: Frigidaire

Part Number: 131777700

The Rear Drum Support Shaft is an OEM part for Frigidaire dryers, specifically designed to ensure the stability and smooth rotation of the dryer drum. This component plays a pivotal role in the dryer's operation by supporting the rear of the drum, allowing it to turn evenly and quietly during cycles. Note: The rear drum bearing kit is 5303281153.

The causes behind these issues often stem from normal wear and tear, excessive loads that strain the dryer's components, or lack of regular maintenance. Over time, the support shaft can wear down, become loose, or even corrode, leading to operational inefficiencies and potential damage to the dryer.

Symptoms of a failing Rear Drum Support Shaft include:

Unusual noises, such as thumping or squeaking, during operation
The dryer drum struggling to rotate or not rotating at all
Increased wear on other components, such as the belt or motor, due to improper drum alignment

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016

The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible. Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem. Next step was to... Read more

$113.73

Compare At:: $136.48
You Save:: $22.75

IN STOCK

Ships Today Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Ge part

Condenser Fan Blade

5.0 (8)

By: Ge

Part Number: WR60X24484

The Condenser Fan Blade is an OEM part for GE refrigerators. It is responsible for moving air across the condenser coils to help dissipate heat, allowing the refrigerator to maintain the proper cooling temperature. This fan blade ensures efficient operation of the cooling system by facilitating proper airflow.

You should replace this condenser fan blade if it becomes damaged, warped, or fails to move air effectively. Common causes of a bad fan blade include physical damage from debris, wear and tear over time, or warping due to prolonged exposure to heat.

Symptoms of a bad condenser fan blade include:

Refrigerator not cooling properly
Increased noise from the refrigerator
Overheating of the condenser coils
Reduced airflow around the condenser area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Condenser fan stopped. Bob W. • San Carlos , CA • May 01, 2021

Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now. Read more

$23.95

Compare At:: $28.74
You Save:: $4.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Door Light Switch

5.0 (6)

By: Ge

Part Number: WR23X29170

The Door Light Switch is an OEM part for GE refrigerators. It is located near the top of the refrigerator compartment, and it is activated by the door's movement. When the door is opened, the switch is triggered, turning on the interior light to provide visibility. When the door is closed, the switch is released, turning off the light to conserve energy.

Causes of a faulty or damaged door light switch can include regular wear and tear, electrical malfunctions, or physical damage. These factors can result in issues such as the interior light not turning on or off properly, or the light staying illuminated even when the door is closed.

Symptoms of a bad door light switch may include:

The interior light not turning on when the door is opened
The interior light not turning off when the door is closed
Inconsistent or flickering operation of the interior light

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Lights in the interior of the refrigerator would not always come on and the water and ice dispenser in the door would only work randomly Robert O. • Loveland , OH • October 01, 2021

Replaced the two door switches. Read more

$6.53

Compare At:: $8.36
You Save:: $1.83

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Icemaker

4.9 (8)

By: Ge

Part Number: WR30X35285

The Ice Maker is an OEM part for GE refrigerators. It is a crucial component responsible for producing and dispensing fresh ice cubes, providing a convenient source of ice for your beverages and other needs. The ice maker is designed to automatically replenish the ice supply, ensuring you never run out.

Symptoms of a bad ice maker include:

Failure to produce ice or produce an insufficient amount
Ice cubes that are misshapen or stuck together
Water leaks or overflow from the ice maker area

Causes of a bad ice maker can range from issues with the water supply line or freezing mechanism, to mechanical failures or blockages within the ice maker itself. Over time, mineral buildup or freezing can also impact the ice maker's ability to function properly.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ice maker quit working Alysse O. • Sunnyvale , CA • June 12, 2014

Watched the video to trouble shoot the problem. Still didn't work. Looked at the cost of new ice maker and watched another video on how to take it apart. Super easy, Only problem was the recommended replacement part did not look like what we had so took a chance and went with the one that that wasn't recommended but looked exactly like ours. Working perfectly now! Read more

$110.23

Compare At:: $130.07
You Save:: $19.84

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

E Ring

4.7 (48)

By: Whirlpool

Part Number: WP354987

The Idler Shaft Retaining Ring is an OEM replacement part for Whirlpool dryers. Also called an "E" ring, it is a sealing gasket positioned between the front and rear housing omponents. Maintaining an airtight seal prevents gas leakage and promotes efficient drying performance.

Causes of a bad retaining ring commonly involve compression loss of the rubber gasket material over many years of heating cycles. Exposure to petroleum-based cleaners may prematurely deteriorate the seal as well.

Symptoms of a failed 'E' ring include:

Gas leaks emitting foul odors around seams or vents
Reduced heat conductivity hampering dryer functioning
Moisture accumulation shortens fabric lifespan
Drafts compromising indoor air quality and energy bills

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.

This part fixes the following symptoms

Will not tumble

Do-It-Yourself Stories from Customers like You Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

$11.95

Compare At:: $14.22
You Save:: $2.27

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

High Temperature Adhesive

4.8 (23)

By: Frigidaire

Part Number: 5308027429

The High Temperature Adhesive is an OEM part for Frigidaire appliances. This adhesive is specifically formulated to withstand high temperatures and is used in various repair applications within appliances such as ovens, ranges, and dryers.The 1-ounce tube contains adhesive formulated to withstand the extreme heat inside dryer drums and cabinets

Causes of a bad adhesive can include exposure to extremely high temperatures over extended periods, contamination by dirt or grease, or the natural aging and drying out of the adhesive.

Symptoms of a bad high temperature adhesive include:

Components or parts becoming loose or detached
The adhesive becoming brittle or cracked
Inability to properly bond surfaces exposed to high heat
Visible deterioration or peeling of the adhesive

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Marks left on clothes
Noisy

Do-It-Yourself Stories from Customers like You Clothes getting stuck in front of dryer then later on a grinding and loud noise when spinning Michael G. • Chicago , IL • August 23, 2020

I'm new to how a dryer works, so I just started taking it apart to see what exactly was causing it. The video examples on the APP website were all amazing. It gave me a good idea of what I was getting into and showed me the common repair issues. The dryer being 12 years old, I was on the fence about repairing or replacing. However, once I got a list of parts I might need and getting the confidence by watching the videos, I said "what have I got to lose." The cause of the scraping and loud... Read more

$49.95

Compare At:: $58.94
You Save:: $8.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Fastener Door Handle

4.7 (7)

By: Ge

Part Number: WR01X11007

The Fastener Door Handle is an OEM component for GE refrigerators. This door handle provides a comfortable grip for accessing refrigerator shelves and bins. It attaches securely to the refrigerator door through durable metal fasteners.

Causes for a bad door handle could be cracks, damage, or stripped fastener holes resulting in a loose or detached handle. Regularly gripping and lifting may also cause normal wear over time.

Symptoms of a failing door handle include:

The handle detaching completely from the door
Looseness making the handle wobbly or unstable to hold
Sharp edges or broken parts posing a safety risk

This OEM GE handle is also compatible with Hotpoint, RCA, and select Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You Hands down appliance pros made my shopping experience very easy my shipment arrived on time with no problems Dolita W. • New Orleans , LA • April 09, 2016

I 100 percent recommend Appliance Pros. This was by far the best experience I've ever had making a purchase on line or via the the phone. Read more

$7.37

Compare At:: $8.36
You Save:: $0.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Heater Assembly

4.7 (41)

By: Whirlpool

Part Number: WPY303404

The Heater Assembly Complete is an OEM part for Whirlpool dryers, engineered to generate and maintain the heat necessary for drying clothes efficiently and uniformly. This assembly ensures that your dryer can reach and regulate the desired temperatures without overheating.

Causes of a bad Heater Assembly can stem from normal wear and tear, overloading of the dryer, insufficient maintenance leading to buildup and blockages, or electrical surges that damage the heating components.

Symptoms of a bad Heater Assembly Complete include:

Clothes taking longer to dry or not drying at all
The dryer not heating up despite running
Overheating of the dryer, which could trip safety switches or fuses
Unusual noises or smells indicating potential electrical issues or burning

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

No heat or not enough heat

Do-It-Yourself Stories from Customers like You Our 35 year old maytag dryer stopped heating Chris P. • Victor , NY • August 15, 2015

I ordered all the parts necessary to replace the heating element and thermostat on a Sunday night. Appliance Parts Pros shipped on Monday AM and I received them on Wednesday. It took me 45 minutes to disassemble the dryer, replace the parts and have the dryer working again. It should be good for another 35 years which should cover me for my needs. Thanks again to Appliance Parts Pros for having the best service and always the correct parts. I am a huge fan of your company as you never... Read more

$217.95

Compare At:: $259.36
You Save:: $41.41

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Seal

4.8 (49)

By: Frigidaire

Part Number: 134417000

The Dryer Seal is an OEM replacment part for Frigidaire dryers. It is located at the doorway opening where the drum rotates and helps prevent lint, moisture, and heat from escaping. The seal is a crucial component that ensures efficient drying and heat retention within the dryer drum.

Causes of a bad seal can include wear and tear over time from continuous use or damage due to mishandling. The nylon seal experiences a lot of friction and heat stress with each drying cycle.

Symptoms of a bad seal include:

Increased drying time as heat escapes
Excess lint and moisture accumulation inside dryer components
Visibly worn or cracked seal edges
Cool air leakage noticed around the door when the dryer is running

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Takes too long to dry

Do-It-Yourself Stories from Customers like You Felt/nylon "bearing" felt glide assembly for dryer drum front end support had worn nearly completely away Harlan D. • Warrenville , IL • November 19, 2014

Get some acetone at a Hardware Store before you start. A pint will do. Unplug the dryer from 110 VAC. Pull the top off of the dryer, by lifting it from the front first. It is attached with snap metal fittings. Do not completely remove the top, just tip upright to gain access to the front interior of the dryer. Before you pull any wires from the door switch, record which color wires go to which terminals on the door switch. If you reassemble the connections incorrectly, the gas value will... Read more

$15.95

Compare At:: $39.50
You Save:: $23.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Whirlpool part

Clamp

4.9 (51)

By: Whirlpool

Part Number: WP312967

The Clamp is an OEM part for Whirlpool dryers. This clamp ensures tight and secure connections within the dryer, particularly in securing ducts and vents that are essential for proper airflow and operation.

Clamps may need replacement due to loss of tension, corrosion, or damage from regular use. A compromised clamp can lead to operational issues such as prolonged drying times or excessive noise, resulting from loose parts or improper ventilation.

Symptoms of a bad Clamp include:

Loose or detached vents or hoses, leading to inefficient dryer operation.
Increased drying times, as a result of compromised airflow from unsecured ducts.
Unusual vibrations or noise, indicating that internal components may not be securely fastened.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

No heat or not enough heat
Takes too long to dry
Noisy

Do-It-Yourself Stories from Customers like You Lack of heat and long drying times Allan H. • Baroda , MI • March 06, 2016

Our Maytag gas clothes dryer was not drying like it should/used to and was making a lot of noise. After researching online I figured the vent was partially blocked and/or the blower wheel was bad. When I took it apart, the vent had very little lint in the lower elbow exiting the back of the dryer but the blower wheel was loose on the shaft and was missing the clamp. I cleaned out the vent and put a hose clamp on the blower wheel to tighten it to the shaft and tried it again. The noise was... Read more

$11.95

Compare At:: $14.22
You Save:: $2.27

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Idler Pulley Arm

4.8 (30)

By: Whirlpool

Part Number: WP6-3033630

The Idler Pulley Arm is an OEM component specifically designed for Whirlpool brand clothes dryers. It pivots to lift belt tension and remove slack during dryer tumbling.

Symptoms of a problematic idler pulley arm include:

Drive belt slips off pulleys or tracks improperly
Reduced drying due to inefficient tumbling

Potential causes involve typical wear from extended usage. Seizing bushings or restrictive movement may diminish functionality over time as well.

This genuine OEM Whirlpool part is compatible with models including some brands produced by KitchenAid, Maytag, and Kenmore.

Do-It-Yourself Stories from Customers like You Clothes dryer had developed a loud squealing noise the problem turned out to be the idler pulley wheel Don F. • Bakersfield , CA • September 19, 2020

I removed the front panel of the dryer by removing 2 screws and lifting it up and out. Then I removed 4 screws from the bracket holding the tub in place. I had previously removed the 4 screws from the rear inspection cover so I reached in and released the spring loaded belt that turns the tub and then removed the idler pulley wheel. The tub just lifts out at that point, exposing the 2 Drum support rollers in the rear. I removed the 2 rear drum support rollers and decided to order 2 of... Read more

$54.36

Compare At:: $64.69
You Save:: $10.33

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Heater Element (240V)

4.9 (26)

By: Whirlpool

Part Number: WPY313538

The Heater Element is an OEM replacement part for Whirlpool electric dryers. The element provides heat for drying cycles. 240 Volts

Causes of a faulty heater element can include normal wear of internal coils and insulation from repetitive heating. Over-drying of heavy or bulky loads may potentially overwork the element prematurely.

Symptoms of a bad heater element include:

Inconsistent or excessively long dry times due to inadequate heat
Damage to other internal components from overwork during compensation
Risks arise as insulation deteriorates potentially exposing live current

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You No heat in my maytag dryer lde412 David D. • Rock Creek , OH • November 18, 2014

I took off the front cover and checked the sensors which were all good. Then I removed the cover for the heating coil after finding that it appeared open. Found that the coil had in fact broken but the break was not visible just by looking in. Located the break in the coil within an insulator near the back. I checked appliance stores locally and found the coil for far more than Appliance Parts Pros wanted for it. I placed an order after chatting with a tech, I placed and order and had it in... Read more

$43.95

Compare At:: $56.33
You Save:: $12.38

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Door Latch Kit

4.9 (35)

By: Whirlpool

Part Number: 306436

The Dryer Door Latch Kit is an OEM part for Whirlpool dryers. It ensures the dryer door stays securely closed during operation, allowing the dryer to function correctly and safely. This kit typically includes the latch, strike, and necessary mounting hardware for easy installation.

Causes of a bad door latch can include wear and tear from frequent use, accidental damage from forceful closing, or alignment issues due to the door being knocked out of place. A faulty latch can prevent the dryer from starting or cause it to stop mid-cycle if the door doesn't stay closed.

Symptoms of a bad dryer door latch include:

The dryer door not staying closed
The dryer not starting or stopping unexpectedly during a cycle
Difficulty in closing or latching the door
Loose or misaligned latch components

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Female part of drier door latch broke Randy E. • Port Republic , VA • August 30, 2014

Took off front cover of drier, removed old part and just snapped in new part. Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Gde21dmkes Parts

Defrost Thermostat

Compressor Start Device

Evaporator Fan Blade

Rear Drum Support Shaft

Condenser Fan Blade

Door Light Switch

Icemaker

E Ring

High Temperature Adhesive

Fastener Door Handle

Heater Assembly

Seal

Clamp

Idler Pulley Arm

Heater Element (240V)

Dryer Door Latch Kit