Ldg67600aaw Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Dishrack

4.7 (3)

By: Whirlpool

Part Number: W11752368

This dishrack replaces a damaged, rusted, or warped rack to restore smooth loading and secure support for dishes. A solid rack keeps items upright for better spray coverage, cleaner results, and helps prevent rust transfer and chipping.

Holds and organizes plates, bowls, and cookware for proper spacing and spray access
Provides stable support to reduce tipping and breakage during wash cycles
Replaces racks with rust, broken wires, or bent/missing tines
Can help resolve issues like rust marks on dishes and loading difficulties

What's included: 1 dishrack Install notes:

Disconnect power at the breaker before servicing
Open the door; slide the old rack out—on some models, release rack stops to remove
Transfer any reusable accessories from the old rack to the new rack if applicable
Wear cut-resistant gloves; set the new rack on the rails and verify smooth movement and proper door closure

Do-It-Yourself Stories from Customers like You Dish racks disintegrating tines breaking off & coating was coming off Lorie D. • Midland , TX • January 12, 2026

Ordered new ones & replaced them. Read more

$155.79

Compare At:: $173.10
You Save:: $17.31

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Idler Arm Sleeve

4.7 (39)

By: Whirlpool

Part Number: WP315772

The Idler Arm Sleeve is an OEM replacement part specific to Whirlpool brand clothes dryers. It is a cylindrical component that protects the idler arm and accommodates its movement. Located near the dryer drum, the idler arm sleeve aids in the smooth operation of the drive system that rotates the drum.

Causes of a worn idler arm sleeve include normal abrasion from repeated use and vibration. Failure results in increased friction and noise.

Symptoms of a faulty sleeve are:

Clunking or grinding noises coming from the rear of the dryer
Uneven drum rotation or rotation difficulties
Premature wear of idler arm bearings
Idler arm movement not sliding freely

This part is also compatible with Whirlpool, Maytag, KitchenAid, and other brands.

Do-It-Yourself Stories from Customers like You The motor burned up after 28 years Robert M. • Paw Paw , MI • December 20, 2016

I replaced the motor and all other moving components along with the felt drum seals.drum glides and drive belt. The wiring instruction is where i had the most problems. Because my wiring had only 4 wires in the harness not 5, and one was a different color then the instructions call out, I believe was because it might have been and older model. the instruction called for a gray wire but mine was white with a blue piggy back wire attached. but after finding a few videos on line i figured that the... Read more

$11.95

Compare At:: $14.34
You Save:: $2.39

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Fiber Washer

4.9 (41)

By: Whirlpool

Part Number: WP312535

The Fiber Washer is an OEM part for Whirlpool appliances. This washer provides a reliable seal and is used in various connections within the appliance to prevent leaks and ensure secure fittings. Its fiber construction offers durability and resistance to wear, making it ideal for maintaining tight seals in high-pressure or high-temperature environments.

Common causes of a bad fiber washer include degradation from water or chemical exposure, physical damage from over-tightening, and natural wear and tear.

Symptoms of a bad fiber washer include:

Water or fluid leaks at connection points
Loose fittings or connections
Visible wear, cracks, or deformation of the washer
Decreased performance of the appliance due to improper sealing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Very concerning loud thumping noise while running our dryer. William M. • Sudbury , MA • July 20, 2019

In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future. I was wrong. I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity. I found out... Read more

$7.37

Compare At:: $8.70
You Save:: $1.33

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

High Limit Thermostat

4.9 (37)

By: Whirlpool

Part Number: WP303395

The Whirlpool High Limit Thermostat is an OEM component for Whirlpool dryers, designed to prevent the dryer from overheating by shutting off the heat when the dryer reaches a certain temperature. This safety mechanism is crucial for preventing fires and maintaining the longevity of your dryer.

Symptoms of a bad High Limit Thermostat include:

Clothes taking longer than usual to dry
Dryer not producing any heat
Overheating of the dryer exterior

These issues may arise due to a malfunctioning thermostat, which can occur from a buildup of lint and debris blocking proper airflow, a faulty heating element that causes the dryer to overheat, or wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models, ensuring a wide range of applicability and reliability for maintaining your dryer's performance.

Do-It-Yourself Stories from Customers like You Would run fine but would not dry clothes something would not allow the dryer to heat Todd K. • Burr Oak , MI • March 10, 2017

For several months we could smell a slight odor of propane in the laundry room and wondered why, just didn't seem like it was enough to be overly concerned, but thought something must be wrong with the dryer, but it was still working. We just didn't know how inefficiently. Then the extra time it took to dry a load of clothes progressively seemed to get longer, but things still seemed to work fine and the clothes got dried, given enough time. Then approximately 3 weeks ago we noticed the dryer... Read more

$35.56

Compare At:: $43.52
You Save:: $7.96

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

E Ring

4.7 (48)

By: Whirlpool

Part Number: WP354987

The Idler Shaft Retaining Ring is an OEM replacement part for Whirlpool dryers. Also called an "E" ring, it is a sealing gasket positioned between the front and rear housing omponents. Maintaining an airtight seal prevents gas leakage and promotes efficient drying performance.

Causes of a bad retaining ring commonly involve compression loss of the rubber gasket material over many years of heating cycles. Exposure to petroleum-based cleaners may prematurely deteriorate the seal as well.

Symptoms of a failed 'E' ring include:

Gas leaks emitting foul odors around seams or vents
Reduced heat conductivity hampering dryer functioning
Moisture accumulation shortens fabric lifespan
Drafts compromising indoor air quality and energy bills

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.

This part fixes the following symptoms

Will not tumble

Do-It-Yourself Stories from Customers like You Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

$11.95

Compare At:: $14.22
You Save:: $2.27

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Clamp

4.9 (51)

By: Whirlpool

Part Number: WP312967

The Clamp is an OEM part for Whirlpool dryers. This clamp ensures tight and secure connections within the dryer, particularly in securing ducts and vents that are essential for proper airflow and operation.

Clamps may need replacement due to loss of tension, corrosion, or damage from regular use. A compromised clamp can lead to operational issues such as prolonged drying times or excessive noise, resulting from loose parts or improper ventilation.

Symptoms of a bad Clamp include:

Loose or detached vents or hoses, leading to inefficient dryer operation.
Increased drying times, as a result of compromised airflow from unsecured ducts.
Unusual vibrations or noise, indicating that internal components may not be securely fastened.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

No heat or not enough heat
Takes too long to dry
Noisy

Do-It-Yourself Stories from Customers like You Lack of heat and long drying times Allan H. • Baroda , MI • March 06, 2016

Our Maytag gas clothes dryer was not drying like it should/used to and was making a lot of noise. After researching online I figured the vent was partially blocked and/or the blower wheel was bad. When I took it apart, the vent had very little lint in the lower elbow exiting the back of the dryer but the blower wheel was loose on the shaft and was missing the clamp. I cleaned out the vent and put a hose clamp on the blower wheel to tighten it to the shaft and tried it again. The noise was... Read more

$11.95

Compare At:: $14.22
You Save:: $2.27

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Idler Pulley Arm

4.8 (30)

By: Whirlpool

Part Number: WP6-3033630

The Idler Pulley Arm is an OEM component specifically designed for Whirlpool brand clothes dryers. It pivots to lift belt tension and remove slack during dryer tumbling.

Symptoms of a problematic idler pulley arm include:

Drive belt slips off pulleys or tracks improperly
Reduced drying due to inefficient tumbling

Potential causes involve typical wear from extended usage. Seizing bushings or restrictive movement may diminish functionality over time as well.

This genuine OEM Whirlpool part is compatible with models including some brands produced by KitchenAid, Maytag, and Kenmore.

Do-It-Yourself Stories from Customers like You Clothes dryer had developed a loud squealing noise the problem turned out to be the idler pulley wheel Don F. • Bakersfield , CA • September 19, 2020

I removed the front panel of the dryer by removing 2 screws and lifting it up and out. Then I removed 4 screws from the bracket holding the tub in place. I had previously removed the 4 screws from the rear inspection cover so I reached in and released the spring loaded belt that turns the tub and then removed the idler pulley wheel. The tub just lifts out at that point, exposing the 2 Drum support rollers in the rear. I removed the 2 rear drum support rollers and decided to order 2 of... Read more

$54.36

Compare At:: $64.69
You Save:: $10.33

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Natural Gas Limiter

4.9 (15)

By: Whirlpool

Part Number: WP694424

The Natural Gas Limiter is an OEM replacement part for Whirlpool dryers. Located where the gas supply connects, it regulates safe flow levels to fuel burners during heating cycles. Precise control prevents over-firing issues.

Symptoms of a faulty limiter include:

Dryer not achieving proper temperatures or taking too long
Yellow flames indicating abnormal gas-to-air ratios
Fault codes showing problems with gas valve readings

Causes can range from debris accumulation reducing gas flow to mechanical wear of linkage components. This replacement restores optimized operation.

This OEM replacement part is compatible with select KitchenAid and Maytag brand models.

Do-It-Yourself Stories from Customers like You I needed to convert from lp to natural gas Mark S. • Raleigh , NC • June 01, 2015

Removed LP Orifice and LP Gas limiter. Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP. I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just... Read more

$26.95

Compare At:: $31.80
You Save:: $4.85

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Door Latch Kit

4.9 (35)

By: Whirlpool

Part Number: 306436

The Dryer Door Latch Kit is an OEM part for Whirlpool dryers. It ensures the dryer door stays securely closed during operation, allowing the dryer to function correctly and safely. This kit typically includes the latch, strike, and necessary mounting hardware for easy installation.

Causes of a bad door latch can include wear and tear from frequent use, accidental damage from forceful closing, or alignment issues due to the door being knocked out of place. A faulty latch can prevent the dryer from starting or cause it to stop mid-cycle if the door doesn't stay closed.

Symptoms of a bad dryer door latch include:

The dryer door not staying closed
The dryer not starting or stopping unexpectedly during a cycle
Difficulty in closing or latching the door
Loose or misaligned latch components

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Female part of drier door latch broke Randy E. • Port Republic , VA • August 30, 2014

Took off front cover of drier, removed old part and just snapped in new part. Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Door Catch Kit

5.0 (22)

By: Whirlpool

Part Number: LA-1003

The Door Catch Kit is an OEM part for Whirlpool dryers. It includes the door catch and the necessary mounting hardware to secure it in place. This kit ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently.

Causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.

Symptoms of a bad door catch include:

The dryer door not staying closed
Difficulty latching the door shut
The dryer stopping mid-cycle due to the door opening

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close
Shuts off too soon
Doesn't shut off
Takes too long to dry

Do-It-Yourself Stories from Customers like You Door clip to my dryer broke Richard D. • North Dinwiddie , VA • March 15, 2014

Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done. Total time was less than 10 minutes. Works like new. Read more

$24.95

Compare At:: $29.94
You Save:: $4.99

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Thermal Fuse

4.9 (15)

By: Whirlpool

Part Number: WP306604

The Thermal Fuse is an OEM replacement part for Whirlpool dryers. This safety device monitors and protects heating elements inside the dryer. If temperatures rise too high due to a blockage or other issue, the fuse automatically opens the electrical circuit to cease further heating.

Symptoms of a bad thermal fuse include:

Dryer failing to heat or stay warm during cycles
Fluctuating or inconsistent heat levels
Tripped circuit breakers after drying

Causes of failure involve wear or damage from years of high heat exposure. Over time, components become brittle and less responsive.

This OEM Whirlpool replacement is also compatible with some Kenmore, Admiral, Roper, and Estate dryer models.

This part fixes the following symptoms

Won't start
No heat or not enough heat

Do-It-Yourself Stories from Customers like You Maytag gas dryer was not heating Christopher P. • Los Angeles , CA • October 04, 2014

Did some dryer repair research (dryer not heating) on the internet. Bought an ohm meter, opened up the dryer and tested the cut-off-T, high limit thermostat, dryer igniter, flame sensor, cycling thermostat for continuity. The igniter was bad, the other parts tested ok. Went online to AppliancePartsPros.com searched for a new igniter for my specific dryer model, found the right replacement igniter and watched the video on how to replace the igniter. Because my dryer is old (15+ years) and I... Read more

$28.95

Compare At:: $34.45
You Save:: $5.50

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.6 (7)

By: Whirlpool

Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

Loose or wobbly components within the appliance
Panels or parts that are not securely attached
Rattling or unusual noises due to loose parts
Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Hex Nut

4.9 (20)

By: Whirlpool

Part Number: WP33001443

This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.

Threads onto a matching bolt or stud to clamp parts together
Helps maintain alignment and reduce vibration-related loosening
Commonly used on panels, brackets, supports, and internal assemblies
Replace when threads are damaged, hex flats are rounded, or hardware is missing
Symptoms can include loose or rattling components or hardware that won't stay tight

What's included: One hex nut. Install notes:

Disconnect power and, if applicable, shut off gas or water before servicing
Use the correct-size nut driver or wrench to avoid rounding the hex
Start the nut by hand to prevent cross-threading; tighten snugly without over-torquing
Inspect and replace any damaged mating bolt/stud or washer for a secure repair

Do-It-Yourself Stories from Customers like You The rollers needed to be replaced, the axles for the rollers needed to be replaced, the tension pulley roller needed to be replaced, the belt needed to be replaced Richard G. • El Paso , TX • December 18, 2018

It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!! Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Cycling Thermostat

4.3 (7)

By: Whirlpool

Part Number: WPY304475

The Cycling Thermostat is an OEM part for Whirlpool dryers. This thermostat regulates the temperature inside the dryer by cycling the heating element on and off to maintain a consistent temperature. .

Causes of a bad cycling thermostat can include wear and tear over time, electrical faults, or damage due to overheating.

Symptoms of a bad Cycling Thermostat include:

Clothes taking too long to dry
The dryer not heating at all
The dryer overheating
Erratic or inconsistent drying temperatures

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Too hot

Do-It-Yourself Stories from Customers like You It was taking unusually long to dry a typical load Robert L. • Williamsburg , VA • November 15, 2014

I removed the front panel and observed the heating element while running the dryer. It was cycling off every minute or so and staying off for several minutes. Even though it was likely the high temp cycling thermostat I replaced both the 14, and 15 cycling thermostats which I think are the original factory units. That makes them nearly 35 years old. Problem fixed. Read more

$55.36

Compare At:: $65.88
You Save:: $10.52

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Light Bulb

4.7 (21)

By: Whirlpool

Part Number: W10857122

The Light Bulb is an OEM part for Whirlpool refrigerators. This part illuminates the water and ice dispenser area, providing visibility and ease of use, especially in low light conditions.

Over time, the light bulb can fail due to normal wear and tear, electrical surges, or damage from vibrations and impacts.

Symptoms of a bad light bulb include:

The dispenser area not lighting up when activated
Flickering or dim lighting
The bulb failing to turn on consistently

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You My dryer was making noise James M. • Middletown , RI • September 19, 2014

I went on line and purchased all of the possible parts that could be worn out. I spent less than the service guy wanted to show up...The online videos were spot on. Two hours and it works like new! One of the best values on the Internet! Read more

$13.47

Compare At:: $16.03
You Save:: $2.56

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw, 1 Piece

4.6 (13)

By: Whirlpool

Part Number: WPY014874

This factory fastener secures appliance components such as panels, brackets, and trim. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and helps keep assemblies aligned for reliable performance.

Fastens appliance parts to maintain structural integrity and alignment
Helps address symptoms like loose or vibrating panels, gaps, or hardware that won't stay tight
Replaces lost, damaged, or corroded fasteners during repairs or reassembly
OEM-matched thread and fit for the specified location

What's included: 1 screw Install notes:

Disconnect power; shut off gas or water supplies before servicing
Replace one screw at a time to preserve alignment of parts
Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
Use the correct driver size/type specified for your model

Do-It-Yourself Stories from Customers like You Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018

$5.95

Compare At:: $7.14
You Save:: $1.19

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Ldg67600aaw Parts

Dishrack

Idler Arm Sleeve

Fiber Washer

High Limit Thermostat

E Ring

Clamp

Idler Pulley Arm

Natural Gas Limiter

Dryer Door Latch Kit

Door Catch Kit

Thermal Fuse

Screw

Hex Nut

Cycling Thermostat

Light Bulb

Screw, 1 Piece