Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
No water or ice from dispenser? Leaking water? This water inlet valve controls water flow to your dispenser and ice maker. DIY-friendly, 10-15 min install.
I have a Samsung fridge and I had a problem were low pressure water kept coming out of the dispenser and would not stop. At first I thought it was the dispenser switch until I read reviews on the App Pro sight and the issue pointed to the water valve. I ordered the part from App Pro (very quick delivery) installed the new water valve in 15 minutes. Turned water back on plugged fridge back in wall and problem solved. Water dispenser working normally. (part DA62-00914B) Read more
Replacement cap for French door refrigerator center hinge assembly. Covers hinge mechanism on door frame. Needed when original is cracked or broken.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Replaces a cracked, broken, or missing water dispenser cover assembly on your refrigerator. Snaps into place over the dispenser area to restore appearance.
I read an article concerning the same problem and ordered the interior lever, but the real issue was that the plastic piece that activated the water flow was broken off the interior of the water dispenser cover assembly. I popped out the dispenser cover (it is on very snugly) and replaced it with a new one (again, it went back on but with some force needed). I only needed a screwdriver to pop the cover and would suggest you use a towel as a buffer to prevent scratching the interior of the... Read more
Replacement axle pin for refrigerator front caster wheels. Installs through wheel assembly to secure rolling casters. Needed when bent, broken, or worn.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Secures the glass panel over your refrigerator's crisper drawers. Replace if cracked, broken, or missing to restore proper shelf support and appearance.
Order a new fixer Read more
The door mullion is the vertical divider between French doors on your refrigerator. Replace if the case is cracked, the flap won't retract, or the hinge is broken.
Fix water pooling under crisper drawers. This evaporator shield with drain pan stops leaks caused by corrosion. Moderate DIY repair with video guide.
Repair required removing all of the interior drawers & shelves and the interior back panel. There you will find the defrost heater. Behind the defrost heater is a metal plate as well as one on the back of the front interior cover. Both were corroded and in need of replacement. I ordered Samsung part #’s AP5577767, plate drain & AP5587916, evaporator plate and replaced both. Read more
Replacement rail assembly for refrigerator vegetable drawers. Installs on the side wall to support drawer gliding. Needed when original is cracked or broken.
Removed the bottom shelf by releasing the 2 clips near the water filter, then lifted the front of the shelf and slid it out. Removed 2 screws from the broken Vegetable Rail and replaced it with the new one. Slid the shelf back into place and locked it down into the clips. Done. Took longer to remove everything from the shelf than it did to fix it. Less than 5 minute repair. Read more
Fix fluctuating temperatures or food freezing in your refrigerator with a new pantry temperature sensor. Common fix for uneven cooling issues.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Self-tapping screw for dishwashers, dryers, refrigerators, and washers. Replace missing, stripped, or damaged screws for secure panel and component mounting.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
Replacement vegetable drawer rail assembly for bottom-mount refrigerators. Installs in the crisper compartment to support produce drawers. Needed when broken or snapped.
I removed the broken rail saving the 2 Phillips head screws for installation of new drawer rail. Removal of the shelf above the drawers was required and was accomplished by pushing a button on the front of the shelf support. The installation was a snap and took about 10 minutes after removal of food items. The part was the correct one as verified by the model number on the inside of the refrigerator door. Thanks AppliancePartsPros.com! Read more
Fix interior lights not turning on when you open the door. This refrigerator door switch is a straightforward DIY repair, typically done in 20 minutes.
Replaced the reed switch Read more
Fix defrost sensor errors and cooling issues in your refrigerator. This temperature sensor regulates defrost cycles. Straightforward repair with basic tools.
Using service manual, obtained from this site, I verified with meter that this was the error. I ordered the defrost sensor. The part arrived the next day. Most of the time to repair was unloading, cleaning, and reloading the refrigerator. Read more
Ice maker not dispensing or spilling ice? This ice guide assembly directs ice cubes properly. Easy 5-10 minute DIY fix with basic tools required.
Didn't know what to call the part - got on chat one evening and the wonderful customer service rep knew exactly how to direct me - and even ordered the part for me! It arrives 2 days later - and we fixed our problem! Seems like breaking the plastic arm when the ice sensor starts to fall down happens rather often - 2nd time we have replaced it - but the fix is easy. Wish there was a permanent fix for the ice sensor - I don't think we have the problem solved just yet - but the plastic arm... Read more