Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces broken or missing end cap on refrigerator freezer door handle. Snaps into place to complete handle appearance. Commonly cracks or breaks off.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
Replaces broken or missing handle mounting stud that secures refrigerator door handles. Installs into door to hold handle firmly in place.
Plastic cover that protects the ice maker temperature sensor. Replaces broken, cracked, or missing covers to secure the sensor wire and foam insulation.
Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket... Read more
Replaces broken or worn center mullion assembly between French doors. Includes internal spring mechanism. Needed when flap won't stay closed or spring fails.
The easiest repair I've ever done. I originally thought (after watching some youtube tutorials) I would need to replace the spring on the flap, but it is not accessible on our Samsung model. Undid the two screws holding the flap to the fridge door, pop it up off the other supports, and un-clip it from the power cord. Put the new flap on the same way and all done! Delivery of the part was crazy fast too! Read more
Seals the ice chute assembly in your refrigerator's dispenser door. Replace if cracked, broken, or missing to prevent frost buildup and air leaks.
Replaced chute gasket and ice bin. Has worked great so far. Fingers crossed. Read more
Replacement pantry drawer cover slide for refrigerators. Installs on pantry compartment to secure cover panel. Replace if cracked, broken, or pins damaged.
I ordered 3 replacement shelves for my fridge. Promptly received the shipment, but one of the items was damaged (the lid for the butter try shelf). I went online and started a chat with the rep from APP, and they were great. Gave them my information and told them the issue. Replacement part sent out on Monday! Great service. Read more
Ice maker not producing ice or water flow stopped? The fill tube heater prevents freezing in the water line. Moderate DIY repair with video guide.
Turn off the water to the ice maker. Unload the freezer and remove the freezer door so you have room to work. Remove the ice maker by removing 2 screws in the front then pull the unit toward the front and unplug the wiring connection. The pipe will now be exposed. Remove the flexible piece from the front of the pipe that directs the water flow to the ice cube tray. Remove the wire tie on the front of the pipe and peel off the insulation surrounding the pipe. The heater will now be exposed.... Read more
Freezer not cooling or fridge showing fan error? Your evaporator fan motor may have failed. This motor circulates cold air throughout your refrigerator.
The blower motor that circulates air through the refrigerator was broken. I had to remove all the shelving and drawers from the refrigerator. Then I had to remove the plastic light cover from the center of the fridge. Then I removed all visible screws to uncover the evaporator/radiator. I then unplugged the light bulb and motor wires. Luckily all wiring is keyed so that it can be plugged in again without error. I removed the motor by opening the motor housing. The housing has 1 screw and... Read more
Replaces cracked or clogged drain cap assembly in refrigerator compartment. Installs behind rear wall to prevent water buildup under crisper drawer.
Found one of the drain valves was clogged causing condensation to overflow on the floor behind the refrigerator. Order the parts on Monday morning and they arrived tuesday afternoon. Replace both of the valves in 15 minutes. Easy repair and save a bundle over a service call. Read more
Fix loud fan noise or refrigerator not cooling from ice buildup. This evaporator cover assembly includes motor, fan blade, and foam insulation.
Replaced the evaporator cover asy.. Read more
Refrigerator compressor won't start after power surge? This overload protector prevents electrical damage to your compressor. DIY repair in 30 minutes.
Took a bit to diagnose. First tried cleaning coils but the problem still persisted. Next took of the back panel and put the system into diag mode. (Press energy save button and fridge button for eight seconds system ding once a second and inverter board red LED will blink a code or be on solid if no issue. See back of the refrigerator for a sticker with what the number of blinks means. My unit one blinking 1 time. So I measured the resistance of the compressor between windings (8.9 ohms between... Read more
Fix water pooling under crisper drawers or ice buildup on coils. This bracket secures the defrost heater to prevent drain freezing. DIY repair in 5 minutes.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Fix warm fridge temps and ice buildup with this evaporator fan motor. Common when fan makes grinding noise or stops running. DIY repair in 2-3 hours.
I took all the items out of the refrigerator. Removed the screws that hold the cover over the evaporator motor. Than for three hours used a hair drier to remove ice. The panel was frozen on if you pull on it it will break. Soaked up all the water removed the panel and took the fan blade off. That was difficult because it looks like a regular screw head however, you need to push in that which will cause it to release the blades and than push it onto the new motor. Than replace the panel put the... Read more
Replace your cracked, broken, or missing freezer drawer handle. This plastic handle installs on the pull-out freezer drawer for easy opening and closing.
Using the website, I was able to locate the part and order it Read more
Ice maker producing clumped cubes or ice sheets? The temperature sensor bracket ensures proper ice formation. Simple DIY fix with video guide available.
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more