Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces a broken, corroded, or cracked drum spider assembly. This structural support connects the drum to the shaft in front-load washers.
I noticed my 5-year-old Samsung, front-loading washing machine started to sound like my kids were using it as a drum kit. I immediately checked it out and the stainless drum was wobbling so badly that I just took it for an unbalanced load of clothes. My gut was telling me that something was wrong because I had not remembered the machine being so loud before. I removed the clothes from the washer and I ran it empty to confirm my suspicions: the wobble was still there. I would say it had a 2"-3"... Read more
Fix water leaks behind the detergent drawer with this washer upper nozzle connector. Located under the top panel. Easy 5-minute DIY repair with basic tools.
When I opened the rear cover and check the temperature sensor, I noticed the wire connection was damp. I dried it up with a hair dryer and it worked again for a few days. Then the problem came back. When I gone back to inspect the second time, i noticed a lot of water on the floor. I knew there was a leak. I followed the disassemble samsung washer video from "Repair clinic.com" to open the top cover, then i realized the assembly hose was busted. I ordered the parts from this site and... Read more
Fix ND error codes and drainage issues with this washer check valve. Prevents backward water flow in drain pump. DIY-friendly repair with video guide.
Washer said error no drain. Cleaned the filter and still no drain. So the next step was to check the hose for any debris and when I went to pull the hose off it broke, at the same time I found the check valve flap broke in the drain pump and it was blocking the hose. So I replaced the check valve on the drain pump and replaced the hose. Read more
Fix washer won't fill or drain issues with this water valve. Prevents backflow and maintains water pressure. Video guide included. Takes 45 minutes.
REPLACED BACKFLOW CHECK VALVE DIAPRHAM & PUMP Read more
Replace a broken or worn shock absorber that no longer dampens drum movement. Installs between the drum and base to reduce vibration and noise.
Machine was a front load washer, after doing some research found that problem is usually caused by pressure sensor or the spider arm which attaches motor to tub. Read more
Broken or missing dispenser tray leg causing water buildup? This washer detergent tray snaps into place in under 10 minutes. Easy DIY fix for Samsung models.
Replaced with new Detergent cup and fill cap. Cup symphony perfectly. Simple fix for frustrating problem. Read more
Fixes E3 error codes, grinding noises during spin, and loud tapping sounds. This brushless DC motor assembly restores power to washing cycles.
Actually, I am returning your parts. THERE IS NOTHING WRONG WITH THEM! My wife actually found out that we had a warranty on our washer that we didn't know about. But, I can comment that I did chat with your customer service and you guys were very helpful. Read more
Fixes leaking dispenser drawer and softener not dispensing issues. DIY repair takes 15-30 minutes. Includes housing cover for front load washers.
Ordered new dispenser assembly and replaced it. Fixed the problem. Read more
Fix a washer stuck mid-cycle or showing overfill errors with a new water level pressure switch. This part detects water levels to control fill cycles.
Supports the drum and absorbs vibrations to reduce noise and prevent walking during spin cycles. Replace if washer is unbalanced or excessively noisy.
Replaced all four shocks and both springs. Read more
Fix leaking during rinse or spin cycles with this washer check valve ball. Prevents water siphoning and maintains proper water levels. Easy DIY repair.
Replacing the upper nozzle connector did the trick. I could not see damage in the older upper nozzle, it is possible that I could have fixed this just by tightening the parts - but i am happy I purchased both the upper nozzle and check valve ball, it feels good to have installed brand new parts in the washer. Read more
Self-tapping screw for dishwashers, dryers, refrigerators, and washers. Replace missing, stripped, or damaged screws for secure panel and component mounting.
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh.. Be sure to keep track of all your screws. BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person... Read more
Fix violent shaking and banging during spin cycle. This counterweight stabilizes the drum and reduces vibrations. DIY-friendly repair, about 45 minutes.
Found appliancepartspros.com. Chose it for the exploded views of the washer and no-nonsense parts listings. Received the part in 2 days. With help from youtube, I had the new part swapped in under an hour, not bad because I had never taken this washer apart before. Read more
Detergent cup full of water after cycle? This max fill cap snaps into the soap tray to prevent water backup. Simple 5-minute fix with video guide included.
Fix water leaks from your washer's spray nozzle assembly with this connector. Common cause of floor puddles and damp connections. Easy DIY repair.
Fix leaking underneath your washer with this tub to pump hose assembly. Connects the washer tub to drain pump. Moderate DIY repair with video guide.
Used the manuals on this website to identify the part I needed and had it shipped here in 2 days. Awesome experience! Read more