Wfw96600tw Parts

This is a Whirlpool drive motor control board, or MCU, for washing machines. It monitors and controls the speed and direction of the drive motor. If this board fails, the washer likey will not work, and the display may show an error code like F70.Before installing this part, be sure to cut power to the appliance and allow it to drain, cool, and dry completely. The washer will need to be pulled away from any walls to properly access the control panel. After opening the panel, remove any mounting screws or wire harnesses connecting the old drive motor control board and install the new one in its place.This is a genuine OEM part compatible with washers manufactured by Whirlpool brands, including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product contains no additional parts or hardware.

This hinge retainer plate secures the appliance door hinge to the cabinet or door, keeping alignment and smooth operation. Replace a bent, stripped, or missing plate to stop hinge wobble and help the door close and seal properly.

• Anchors the door hinge and distributes load to prevent shifting
• Maintains proper door alignment and gap for smooth opening/closing
• Helps prevent door sagging, rubbing, or poor gasket sealing
• Typical symptoms include a loose hinge, wobbly door, or door not closing flush

• Disconnect power and support the door before removing any hinge fasteners
• Mark hinge locations to preserve alignment during reassembly
• Install the plate in the correct orientation; transfer any spacers/shims in original order
• Tighten fasteners evenly, then verify door alignment and gasket seal

Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.

This outer drain hose routes wastewater from your washer to the household standpipe or sink. Replacing a cracked, kinked, or clogged hose restores proper draining and helps reduce leaks at the back of the appliance.

• Carries discharge water from the drain pump outlet to the home drain connection
• Damage such as splits, pinholes, or hardening can cause leaks during the drain cycle
• Kinks or blockages can lead to slow or no draining and water left in the tub
• Visible wear, brittleness, or recurring drain errors are common signs the hose needs replacement

• Disconnect power and turn off water supply before servicing
• Pull the washer forward to access; keep towels or a pan ready for residual water
• Detach the old hose from the pump/outlet and household drain; transfer and reuse clamps or brackets as required by your model
• Route the new hose without kinks, secure all connections, follow your model's manual for drain placement, then run a test drain and check for leaks

This water inlet valve regulates the flow of household water into the dishwasher during each fill. Replacing a worn or clogged valve restores proper filling and consistent wash performance while helping prevent long fill errors. What it does:

• Electrically opens and closes to allow the correct amount of water into the tub.
• Maintains proper water level for wash and rinse phases.
• Common failure symptoms: no water entering, slow/low fill, long fill or "faucet"/fill errors, or leakage from the valve body.
• Internal screen can clog with debris, restricting flow.

• Disconnect power and turn off the water supply before servicing.
• Access the valve near the front/bottom of the dishwasher; place a towel or pan to catch residual water.
• Move wires and water connections one at a time; transfer any mounting hardware or fittings from the original valve as needed.
• Restore water and power, check for leaks, and run a test fill; ensure the float/float switch moves freely.

This replacement screw secures appliance components such as panels, brackets, and trim. Replacing a missing or damaged fastener restores a tight, rattle-free fit and helps keep your appliance assembled correctly after service or routine maintenance.

• Fastens panels, brackets, or covers to the cabinet/frame for proper alignment and support
• Replaces a stripped, corroded, or missing screw that no longer holds securely
• Helps reduce vibration and rattling caused by loose parts
• Useful when reinstalling components after repairs or part replacements

• Disconnect power; turn off water or gas to the appliance if applicable
• Use the correct driver size; hand-start threads to avoid cross-threading
• Tighten snugly—do not overtighten into plastic or thin sheet metal
• Inspect the mating clip/threads and replace damaged hardware

This washer door bellow seals the opening between the outer tub and the front panel. The drum-light version restores a watertight seal on models equipped with an interior drum light, helping prevent leaks and odor issues from a torn or deteriorated boot.

• Creates a flexible, watertight barrier between the door opening and the outer tub
• Version designed for models with an interior drum light; aligns with the light opening
• Helps the washer contain water properly through fill, wash, and spin cycles
• Common symptoms: water leaking at the door/front, visible tears or cracks, persistent mildew or odor on the boot

• Unplug the washer and turn off water supply before servicing
• Remove necessary front/top access; release inner and outer retaining clamps and remove the old bellow
• Align drain ports and the drum-light opening; seat the bellow fully on the tub and front panel, then reinstall clamps evenly
• Run a quick test and inspect for leaks

This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.

The Water-Level Pressure Switch is an OEM part for Whirlpool washers. It is responsible for monitoring the water level inside the washer's tub during different cycles. This switch detects changes in air pressure as the water level rises or falls, communicating these variations to the washer's control board. 

Symptoms of a faulty water-level pressure switch include:

• Incorrect water levels during the wash cycle
• Washer not filling or draining properly
• Error codes related to water level

A bad water-level pressure switch can occur due to various factors, such as clogs or blockages in the air hose, a malfunctioning switch mechanism, or electrical issues. If you notice problems such as the washer not filling or draining properly, water levels that are too high or too low, or error codes related to water level, it may be time to replace the water-level pressure switch.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This replacement hose restores a secure, leak-free water path inside your appliance so it can move water where it's needed to fill, circulate, or drain correctly. Replacing a worn hose helps prevent leaks and related performance issues.

• Directs water between internal components as designed
• Maintains proper flow for filling, circulation, or draining
• Helps seal connections when correctly clamped and routed
• Common symptoms of a failed hose include leaks under the unit, slow or incomplete draining, erratic filling, or water-related error codes

• Disconnect power and shut off the water supply before servicing
• Note routing and orientation; replace one end at a time to match the original path
• Inspect and reuse OEM clamps if in good condition, or replace if corroded or weakened; fully seat all connections
• Run a brief test cycle and check all joints for leaks after installation

STACK KIT FOR LONG VENT DRYER

The Shipping Bolt Kit is an OEM part for Whirlpool washing machines, specifically designed to secure the appliance during transport. This kit includes several bolts that are crucial for immobilizing the washing machine's drum, preventing any movement that could lead to internal damage while the unit is being moved. This kit includes two front and two rear shipping bolts

Causes for replacing the Shipping Bolt Kit can stem from misplacing the original bolts after installation or the bolts becoming worn or damaged after multiple uses.

Symptoms of needing a Shipping Bolt Kit include:

• Preparing a washing machine for a move without the original bolts, risking damage to the unit
• Noticing previous shipping bolts are lost or damaged, requiring replacement for future transport

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This drum baffle mounts inside the rotating drum and lifts items so they tumble evenly through the cycle. Replace a cracked, loose, or missing baffle to reduce noise and restore consistent tumbling performance. What it does:

• Lifts and separates laundry as the drum turns for even tumbling
• Helps prevent clumping that can lead to poor results or longer cycles
• Maintains balanced drum movement; damage or looseness can cause rattling or scraping
• May help if items aren't tumbling well, you hear thumping, or garments snag inside the drum

• 1 drum baffle

• Disconnect power before servicing; for gas dryers, also shut off gas. For washers, turn off water supply.
• Open the door and rotate the drum to access the baffle's mounting screw(s).
• Remove the screw(s), disengage the baffle from its slots, and lift it out.
• Seat the new baffle in the slots and secure with the screw(s). Hand-spin the drum to confirm clearance before use.

This water level pressure switch senses tub water level and signals the control to stop filling and advance the cycle. Replacing a failed switch restores proper fill shut-off and allows the washer to move to wash, drain, and spin.

• Detects water level via air pressure in the attached hose from the tub air dome
• Signals the timer/control to close inlet valves at the selected fill level
• Enables agitation and spin only when the level is appropriate or the tub is empty
• Typical symptoms of a failed switch include overfilling or underfilling, continuous filling, cycle not advancing, or no spin

• Disconnect power and turn off water supply before servicing
• Access the switch in the control console or top panel; note wire locations for reassembly
• Transfer the pressure hose and wire connectors to the new switch one at a time; ensure the hose is clear, not kinked or cracked, and fits snugly
• After installation, run a quick fill test to ensure proper shut-off and cycle progression

Includes all four shipping bolts.

This dispenser drawer holds and guides detergent, bleach, and fabric softener into the washer at the correct cycle time. Replacing a worn drawer helps prevent leaks, residue buildup, and improper dispensing that can affect wash results.

• Channels detergent, bleach, and softener from the 3-compartment tray into the wash
• May help when detergent remains in the drawer, leaks from the tray, or additives dispense inconsistently
• Restores smooth opening/closing and proper alignment of the dispenser tray

• Unplug the appliance and shut off water supply before servicing
• Pull the drawer out and release the locking tab to remove; reverse to install
• Transfer any reusable inserts from the old drawer if applicable
• Check for residue in the dispenser housing and clean before reinstalling