Wb21xfinite Switch Parts

The Water Level Switch is an OEM replacement part for Whirlpool washing machines. It monitors and controls the amount of water that fills the drum during each wash cycle. By ensuring the appropriate water level, it aids in the efficient and effective cleaning of laundry while conserving water.

Symptoms of a bad Water Level Switch include:

• The washing machine overfilling or underfilling with water
• Inconsistent or erratic water levels during cycles
• The machine failed to progress from filling water to the wash cycle
• Error codes or indicators related to water levels or filling

Causes for a malfunctioning Water Level Switch can include electrical issues affecting signal transmission, mechanical failures within the switch, or blockages in the pressure hose connected to the switch.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Infinite Switch is an OEM part for Whirlpool ranges. This part allows for precise temperature control and seamless operation of the left front heating elements.

Causes of a bad part can stem from electrical issues, such as power surges or short circuits, physical damage from impact or mishandling, or general wear and tear over time, leading to deterioration of the switch's internal components or connections.

Symptoms of a bad Infinite Switch in a range include:

• Difficulty in adjusting or maintaining desired temperature settings for the burners
• Erratic heating behavior, with burners cycling on and off unexpectedly
• Complete failure of one or more burners to turn on or remain on at the selected setting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This water level pressure switch monitors the washer's tub water level through the air-pressure hose and signals the control when to stop filling. Replacing a faulty switch helps restore accurate fills and consistent cycle progress.

• Senses air pressure from the tub to determine water level
• Signals the control to start/stop filling and advance the cycle
• Common symptoms of a failed switch: fills too little or too much, stops filling early, won't advance into wash/spin, or shows water-level error codes
• Helps protect against overfill conditions when operating correctly

• Disconnect power and shut off water supplies before servicing
• Access through the control/console area; note hose and connector orientations
• Transfer the pressure hose and wire harness; ensure an airtight hose fit with no kinks or cracks, and clear any water/debris from the hose
• With the tub empty, run a quick fill test to ensure proper shutoff and cycle progression

The Water Level Switch Kit is an OEM part for Whirlpool washing machines. This part detects the water level in the washer tub and communicating with the control board to regulate the water intake. The switch ensures that the washer fills to the appropriate level for each wash cycle, optimizing water usage and washing performance.

Causes of a bad water level switch can include electrical failures, wear and tear from prolonged use, or obstructions in the pressure tube that connects to the switch. 

Symptoms of a bad water level switch include:

• Washing machine not filling with enough water
• Overfilling or water spilling out of the tub
• Washer not advancing through cycles
• Error codes indicating water level issues

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Door Switch is an OEM part for Whirlpool dryers. This part detects whether the dryer door is open or closed and ensures the dryer operates only when the door is securely closed.  

Causes of a bad door switch can include regular wear and tear, electrical malfunctions, or physical damage from repeated use.

Symptoms of a bad door switch include:

• Dryer not starting
• Dryer stopping mid-cycle
• Indicator lights not functioning correctly
• Dryer continuing to run even when the door is open

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This surface element infinite switch controls power to an electric cooktop burner, allowing smooth adjustment from low to high heat. Replace a faulty switch to restore consistent, reliable temperature control on your range's surface burner.

• Regulates on/off cycling of the surface element to maintain the selected heat level
• Common failure symptoms: burner won't heat, only heats on high, won't turn off, or heat changes erratically
• Restores full range of settings across the knob from simmer to full power
• Helps resolve intermittent heating caused by worn internal contacts

• Disconnect power at the breaker or unplug the range before servicing
• Remove the knob and access the control panel to reach the switch
• Photograph or label wires; transfer them one at a time to matching terminals on the new switch
• Secure the switch, reinstall the knob and panel, then test all heat settings

The Control Switch is an OEM part for Frigidaire ranges. This part regulates the heat output of the range's burners. By turning the control knob, users can adjust the temperature to their desired level, ensuring precise cooking results.

Causes of a bad control switch can include electrical malfunctions, wear and tear from frequent use, or damage due to overheating.  

Symptoms of a bad Control Switch include:

• Inconsistent or fluctuating burner temperatures
• Burners not turning on or off properly
• Difficulty in adjusting the temperature settings
• The control knob feeling loose or unresponsive

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Spark Switch is an OEM part for Bosch ranges. This part ignites the burners by sending a signal to the spark module, which then produces the spark needed to ignite the gas.  

Causes of a bad spark switch can include wear and tear from regular use, damage from spills or cleaning agents, or electrical issues.  

Symptoms of a bad spark switch include:

• Burners not igniting
  Continuous clicking even after the knob is turned off
  No spark when attempting to ignite the burner
  The cooktop not producing a flame

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Infinite Switch is an OEM replacement part for Whirlpool ranges and cooktops. Located behind the control knob, this switch regulates the power delivered to the heating elements, allowing users to set and adjust the desired cooking temperature.

A malfunctioning Infinite Switch can arise from wear and tear, electrical shorts, or internal component failures. When this essential component is not working correctly, it can lead to inconsistent or uncontrolled heating of the burners.

Symptoms of a faulty Infinite Switch include:

• Burner not heating at all or heating continuously regardless of the knob setting
• Inability to achieve or maintain the desired cooking temperature
• Burner heating inconsistently or fluctuating in temperature
• The control knob feeling loose or not aligning with the indicated settings

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

15 Amp, 125/250 Volt. Package of 2. Switches have 3/16 inch terminals.

The Switch Rocker is an OEM part for Frigidaire ranges. This switch is used to control various functions of the range, such as turning on heating elements or activating specific cooking modes. It provides a reliable and straightforward interface for managing the range's features.

You should replace the range switch rocker if it becomes faulty. Causes of a bad switch rocker can include wear and tear from frequent use, exposure to high temperatures, electrical malfunctions, or physical damage from impacts or mishandling. A defective switch rocker can result in unresponsive controls, making it challenging to operate the range effectively.

Symptoms of a bad Range Switch Rocker include:

• The switch not responding when pressed
• Inconsistent or flickering performance of the heating elements
• Physical damage or looseness in the switch
• Intermittent operation or complete failure to activate the desired function

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Float Switch is an OEM part for Bosch dishwashers. This part monitors the water level inside the dishwasher. It helps prevent overflows by detecting when the water level gets too high and signaling the control board to stop filling and start draining the water.

Causes of a bad float switch can include wear and tear from regular use, buildup of debris or mineral deposits, or electrical malfunctions.  

Symptoms of a bad float switch include:

• The dishwasher not filling with water
• Water overflowing from the dishwasher
• The dishwasher not advancing through the cycles
• Error codes related to water level issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This range control switch regulates power to a surface heating element, letting you adjust the burner from low to high for precise cooking. A worn or failed switch can cause erratic heat or a burner that won't respond to settings.

• Varies power to the surface element for steady, selectable heat
• Common failure symptoms: burner won't heat, stuck on high, won't turn off, or only one temperature
• Restores proper control of the affected surface burner

• Disconnect power before servicing; this is a live-voltage component
• Match and transfer wires terminal-for-terminal from the old switch
• Handle the control shaft carefully to avoid damage
• Test the burner at multiple settings after installation

The On/Off Switch is an OEM part for Bosch dishwashers. It provides the function of powering the unit on or off with the press of a button.

Causes can be normal wear over thousands of cycles or moisture damage compromising electronics. Physical impact could also affect switch operation over time.

Symptoms of a bad on/off switch include:

• The dishwasher failing to start wash cycles when the switch is engaged
• Washers inadvertently stopping mid-cycle or short cycling irregularly
• The control panel lighting/interface malfunctioning or unresponsive

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Lid Switch is an OEM part for GE washing machines. This part prevents the washer from operating when the lid is open. When the lid is closed, the switch activates, allowing the washing machine to proceed with the wash cycle.

Causes of a bad lid switch can include wear and tear from frequent use, damage due to accidental impacts, or electrical failures such as short circuits or corrosion.

Symptoms of a bad lid switch include:

• The washer not starting or stopping mid-cycle
• The machine not draining or spinning
• Error codes related to the lid being detected as open
• The lid not locking or unlocking properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This washer lid switch is the safety interlock that tells the machine the lid is closed. Replacing a worn switch restores proper spin and cycle operation and helps prevent nuisance shutoffs when the lid is bumped or opened.

• Detects lid position and enables washer operation only when the lid is closed
• Interrupts power with the lid open for user safety
• Typical symptoms of failure: washer won't start or won't spin, stops mid-cycle, or runs only when pressing down on the lid
• Mechanical position sensor; it does not lock the lid

• Disconnect power before servicing; verify the tub is fully stopped
• Access is typically from the main top or cabinet—remove screws or release spring clips as designed
• Note wire routing and mounting orientation; transfer any existing hardware and secure the ground as originally installed
• Test lid-close operation before reassembling and running a cycle