Dryer Belt

Best Seller

Genuine Whirlpool part

Dryer Drum Belt 92-1/4" 4-Rib

4.9 (1844)

By: Whirlpool

Part Number: 341241

Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.

Why this belt?

Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.

Fixes these common dryer problems

Problem	How the belt solves it
Drum won’t turn	Transfers motor rotation to drum
Loud squealing / thumping	Replaces stretched or frayed belt
Burning-rubber smell	New belt stops slippage & heat build-up
Damp clothes / long cycles	Restores correct drum speed & airflow

DIY install — about 15 minutes

Unplug dryer; remove lint screen housing & front panel.
Release belt tension at idler pulley; lift drum slightly to slide old belt off.
Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
Re-assemble, run test cycle - enjoy quiet, consistent tumbling.

This part fixes the following symptoms

Heat stays on after drum has stopped
Will not tumble
Touchpad does not respond
No heat or not enough heat

Do-It-Yourself Stories from Customers like You Broken dryer belt Bob B. • St Louis , MO • September 12, 2015

Unpluged dryer first. Then took the lint filter out and removed the two philips screws inside the lint filter lid. Then take a paint scraper just under the top of the dryer two inches from the left front corner and pushed in a little to release the snap connector and did the same on the right side. Then lifted top over. Then take a 5/16 socket or nut driver and remove the two screws on on the left inside panel, then the right side. Lean front out a little and remove the two wires one the back... Read more

$14.64

Compare At:: $17.42
You Save:: $2.78

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Ge part

Refrigerator Defrost Timer

4.8 (5)

By: Ge

Part Number: WR9X482

Fixes refrigerators that won't cool or have excessive frost buildup. This defrost timer cycles frost removal every 6-12 hours. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Ge refrigerator was not cooling as normal Richard W. • Washington , IL • September 30, 2014

This unit has a recurring problem with the defrost timer. after the first 10 years the original part gave up. we had it replaced and (as normal for me i watched very closely) . after 2 years the same trouble started again. the defrost cycle would run to long. so i replaced the same part and solved the trouble again. so now about every 2 years this part wears out again and i order it and replace it. this has gone on for 20 years now and this unit is still going strong after serving us for 29... Read more

$86.29