Maytag Obstructed Lid Switch Door Lock Parts

Best Seller

Genuine Whirlpool part

Maytag Dryer Door Switch

By: Whirlpool

Part Number: WP3406107

The Dryer Door Switch is an OEM replacement part for Whirlpool dryers. It is a crucial safety component that monitors the opening and closing of the dryer door, preventing the dryer from operating when the door is open.

Symptoms of a faulty Dryer Door Switch include:

The dryer failing to start or operate with the door closed
The dryer continuing to run or heat even when the door is open
Error codes or warning lights related to the door switch sensor

Causes of a bad door switch can include normal wear and tear over time, physical damage from mishandling or impact, or electrical malfunctions.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms

Doesn't shut off
Won't start
Will not tumble

Do-It-Yourself Stories from Customers like You Ignitor coil was not turning on Harrison N. • El Cajon , CA • March 14, 2021

I realized my load of laundry was still wet after a normal drying cycle. My first action was to turn the dryer on (2010 gas Maytag centennial) and open the front port to look at the ignitor coil. It never turned orange so I knew there must be a problem with the primary circuit. I shut off the dryer, disconnected the power, pulled it away from the wall, shutoff the gas, and removed the back panel. I then disconnected the wires for the thermal fuse and checked its resistance with a multimeter.... Read more

$26.95

Compare At:: $31.80
You Save:: $4.85

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Range Surface Element Switch

4.9 (255)

By: Whirlpool

Part Number: WP3149400

The Surface Element Switch is an OEM replacement part for Whirlpool ranges and ovens. This component serves as the control mechanism for the 8-inch surface heating element, allowing you to precisely regulate the temperature or turn the burner on and off.

Symptoms of a faulty surface element switch may include:

The heating element not turning on or off properly
Issues with adjusting or maintaining the desired heat level
Flickering or erratic behavior of the burner

Causes of needing to replace the surface element switch can include normal wear and tear over time, electrical malfunctions, or damage from exposure to high heat or spills.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore range and oven models.

For small element switch use- 3149404

This part fixes the following symptoms

Won't start
Element will not heat

Do-It-Yourself Stories from Customers like You The burner on my electric stove was "running wild" (not controlling temperature correctly) James S. • South Abington Township , PA • June 22, 2014

The fix was to replace the infinite control switch on my Whirlpool range. A simple task. Read more

$53.95

Compare At:: $63.66
You Save:: $9.71

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Door Latch Kit

4.9 (304)

By: Whirlpool

Part Number: 279570

The Door Latch Kit is an OEM replacement part for Whirlpool washers. This component is responsible for securely locking the washer door during the wash cycle, preventing it from opening unexpectedly and ensuring a safe and efficient operation.

Symptoms of needing to replace the door latch kit include:

Difficulty in closing or latching the washer door
Door opening unexpectedly during the wash cycle
Leaks or water seeping due to an improper door seal
Excessive wear or damage to the latch components

Causes of a faulty door latch kit can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the door alignment or strike plate.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

This part fixes the following symptoms

Door won't close
Shuts off too soon
Doesn't shut off
Takes too long to dry

Do-It-Yourself Stories from Customers like You Dryer door latch worn out Kathy M. • San Diego , CA • February 22, 2015

When I looked up the part number there was a handy video that popped up. I watched the video and thought "how easy!" so, I ordered that part and waited. The next day, I thought I better start to take the door off of my dryer (because that's what the video instructed, and I wanted a head start) so as I was going into the garage to get my tools, my son came in with a small package. It was the part. That came, to quote another customer, "Crazy Fast!" All the way from Kentucky to California! ... Read more

$6.95

Compare At:: $13.85
You Save:: $6.90

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Lid Lock Assembly

4.9 (119)

By: Whirlpool

Part Number: W11307244

The lid lock is an OEM replacement part for Whirlpool washers. It is designed to keep the door securely closed during operation.

Symptoms of a faulty lid lock:

Washer will not start
Washer stopping randomly during operation
Lid will not lock

By replacing the latch, you can restore door closure and prevent interruptions in your washer's operation. Improve your washer's safety and efficiency with this durable Lid Lock Assembly.

This latch can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Please note: The part might arrive in the locked position. Install the lid lock and power up your washing machine to reset the lock to the open position.

Do-It-Yourself Stories from Customers like You The washer would not go into spin mode only partial wash and drain Karen T. • Dearborn Heights , MI • August 11, 2017

The part is so new no video so I went onto a similar part and watched video that got me about 80%. Then, called and customer service sent me a service Manual but this still was not specific so I broke the old to get it out and in the process figured out how to do it correctly. So I installed the last bit of it which was the bezel through the machine top by myself correctly. So you take the old one out by pushing out to the right from the bottom side using a screw driver for leverage. It will... Read more

$97.50

Compare At:: $115.05
You Save:: $17.55

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Lid Latch Assembly

4.9 (336)

By: Whirlpool

Part Number: W10404050

The Lid Latch Assembly is an OEM part for Whirlpool washing machines. It ensures that the washer lid is securely locked during operation, preventing it from being opened mid-cycle, which could cause water spills and interrupt the washing process. This component plays a vital role in the safety and functionality of the washing machine by ensuring that the lid remains closed during washing and spinning cycles.

Causes of a bad lid latch assembly can include regular wear and tear, electrical failures, or physical damage from forcefully opening or closing the lid. When the lid latch assembly is faulty, it can affect the washer's ability to start or complete a cycle properly.

Symptoms of a bad Lid Latch Assembly include:

The washer not starting or stopping mid-cycle
Error codes related to lid lock issues
The lid not locking or unlocking properly
The washer pausing unexpectedly during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Lid or door won't close
Won't start

Do-It-Yourself Stories from Customers like You My Maytag bravos mct (Maytag commercial technology) model # mvwx500bw0 washer was not agitating properly and was not spinning at all Mark P. • Mundelein , IL • October 14, 2020

Not wanting to spend hundreds of dollars on an appliance technician's service call, I searched online to troubleshoot the problems with my particular Maytag Washer Model Number MVWX500BW0. I stumbled across AppliancePartsPros.com and investigated there the most likely causes for my Maytag Washer's not agitating properly and not spinning at all. In order to acquire some additional information, I telephoned AppliancePartsPros.com and spoke with an extremely professional, knowledgeable and helpful... Read more

$48.95

Compare At:: $57.76
You Save:: $8.81

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Lid Switch

4.9 (430)

By: Whirlpool

Part Number: WP8318084

The Lid Switch is an OEM part for Whirlpool washing machines that is responsible for detecting whether the washing machine lid is closed before allowing the machine to start or continue a cycle. By preventing the washer from operating with an open lid, this switch helps to avoid potential spills or accidents, making it an essential safety feature. The lid switch is activated by the closing of the machine's lid, engaging the washing cycle only when secure closure is detected.

Symptoms of a failing Lid Switch include:

The washing machine not starting or completing a cycle
The washer not spinning or draining
The appliance operating only when the lid is pressed down manually

Causes of a bad Lid Switch can range from mechanical wear and tear to accidental damage, such as slamming the lid too hard or frequently, which can misalign or damage the switch mechanism. Additionally, corrosion caused by moisture or detergent residue can also impair the switch's function.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Won't start
Timer will not advance
Will not drain

Do-It-Yourself Stories from Customers like You Our washing machine filled then began washing the wife opened the lid to add one more item and it would no longer wash or spin Chris J. • Lakeland , FL • January 02, 2018

First I checked the circuit breakers and power to the outlet, then next wanted to check the lid switch, but it wasn't where I had found it on older models. I could hear it clicking on and off as I raised and lowered the lid, but it wasn't visible. I drained the tub through a siphon hose to lighten the machine, so I could slide it away from the wall to better see. Couldn't see the switch anywhere and decided it must be hiding in the raised console, but was unsure of how to attack it without... Read more

$34.54

Compare At:: $40.76
You Save:: $6.22

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Detergent Dispenser

4.9 (49)

By: Whirlpool

Part Number: W10861000

The Detergent Dispenser is an OEM part for Whirlpool dishwashers. It plays a crucial role in the dishwasher's operation by dispensing detergent and rinse aid at the precise moments during the wash cycle. This ensures dishes are thoroughly cleaned and dried without residue.

Causes of dispenser failure can range from mechanical issues such as a faulty spring or latch, blockages within the dispenser itself, or electronic problems affecting the timing and release of detergent.

Symptoms of a bad Detergent Dispenser include:

Failure to dispense detergent properly, leading to dishes not being cleaned effectively.
Rinse aid leakage, which can result in streaky and spotty dishes.
The dispenser door sticking or failing to open during the wash cycle.
Unusual noises coming from the dispenser mechanism.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Soap dispenser not functioning Gary K. • Durango , CO • October 28, 2018

The part went on easily. U Tube video answered any questions I had before installing. Read more

$79.74

Compare At:: $99.67
You Save:: $19.93

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Dual Element Control Switch

4.8 (55)

By: Whirlpool

Part Number: WPW10434452

The Dual Element Control Switch is an OEM part for Whirlpool ranges and cooktops. This control switch is designed for models with dual heating elements, allowing you to adjust the size of the heat output on the LF element depending on whether you are using the inner or outer element.

Causes of a bad Dual Element Control Switch can include electrical issues such as short circuits or worn contacts, physical damage to the knob or switch mechanism, or problems with the internal components that regulate power.

Symptoms of a failing Dual Element Control Switch include:

Inability to change between the inner and outer elements
Irregular heating or lack of response when adjusting the temperature
The switch feeling loose or not engaging properly
Burner not heating even though the switch is turned on

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Large front burner stayed on high power. Lou G. • Mansfield , TX • October 12, 2019

Watched the attached video, then followed directions and installed the part ordered. Read more

$77.29

Compare At:: $91.98
You Save:: $14.69

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Catch

5.0 (36)

By: Whirlpool

Part Number: W11429587

The Dryer Door Catch is an OEM part for Whirlpool dryers. It keeps the dryer door securely closed during operation.

A bad door catch can occur due to regular use, wear and tear, or accidental damage. If you notice that the dryer door is not staying closed or is popping open during the drying cycle, it may indicate a problem with the door catch.

Symptoms of a bad door catch include:

The dryer door not staying closed
Difficulty in properly latching the door shut
Loud banging noises or vibrations

Replace your faulty dryer door catch with this genuine OEM part to restore your dryer door.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Dryer door catch broke, unable to close the door! Stella H. • Beverly Hills , FL • April 10, 2020

I watched your video and had it fixed in less than 1 minute! Read more

$20.95

Compare At:: $25.14
You Save:: $4.19

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Infinite Switch Top Burner Control Switch

4.9 (41)

By: Whirlpool

Part Number: WP3149404

The Infinite Switch is an OEM part for Whirlpool ranges and cooktops. This part controls the temperature of the small burner on electric ranges and cooktops by regulating the power supplied to the burner. The infinite switch allows for precise temperature settings, providing the flexibility to cook a wide variety of dishes by adjusting the heat level as needed.

Over time, infinite switches can wear out or malfunction, leading to issues with controlling the burner's temperature.

Symptoms of a bad Infinite Switch include:

The burner does not heat or heats intermittently
The burner heats to full power regardless of the setting
Inability to adjust the burner's temperature accurately
Physical damage to the switch, such as cracking or melting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Burners were working correctly most of the time but would stay in the on position (high )periodically and would not shut off automatically for the temperature you set the burner for Daryl B. • Gloucester , VA • August 12, 2021

Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,... Read more

$50.23

Compare At:: $59.77
You Save:: $9.54

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Dryer Door Catch

4.9 (320)

By: Whirlpool

Part Number: WPW10111905

The Door Catch is an OEM part for Whirlpool dryers designed to securely hold the dryer door closed during use. This catch is the female piece on the door. For the strike on the front panel that inserts into the catch order W10295405.

Symptoms of a bad Dryer Door Catch include:

The dryer door not staying shut
Difficulty in closing the door
The dryer failing to start due

Causes of failure can include normal wear and tear from the constant use of the dryer, damage from an external force, or misalignment from the door being improperly closed or hit. Over time, these factors can lead to the weakening or breaking of the door catch.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Start button was broke off in the gray part of the control board on our whirlpool cabrio dryer Curtis S. • Gregory , SD • January 06, 2015

There is a video on youtube that talks about how to disassemble the electronic component out of the control board so I really won't go into that part of it. This disassembly of the control board will need to take place before you can even get started taking the gray piece out of the console to replace it. Be careful not break off the little tips behind the control knob, don't force it, it does come apart easily and there is an easy way to do it, that is also on youtube. This is where the... Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Dryer Lint Screen Grille

4.9 (34)

By: Whirlpool

Part Number: W11086603

The Lint Screen Grille is an OEM part for Whirlpool dryers. It works with the lint screen to capture and collect lint during the drying cycle, preventing it from clogging the vent and ensuring proper airflow.

A bad dryer lint screen grille can be caused by regular wear and tear, accumulation of debris, or accidental damage. If the grille becomes cracked, broken, or warped, it can lead to lint escaping from the lint screen or obstructed airflow.

Symptoms of a bad dryer lint screen grille include:

Lint escaping from the lint screen area.
Reduced drying efficiency or longer drying times.
Visible damage or warping of the grille.
Excessive lint buildup in the venting system.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You The lint catch was broken Misti P. • Spokane , WA • January 18, 2019

This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more

$28.22

Compare At:: $33.30
You Save:: $5.08

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Lid

4.9 (25)

By: Whirlpool

Part Number: W11259006

The Lid is an OEM part for Whirlpool washing machines. This part prevents water from splashing out during cycles and ensuring that the machine operates only when the lid is properly closed, thanks to integrated safety mechanisms.

Causes for replacement can include physical damage from impact, wear and tear on hinges or latching mechanisms, or issues with the lid sensor. A faulty lid not only affects the functionality of your washing machine but can also pose safety risks, as the washer may operate in an unsafe condition or not at all.

Symptoms of a bad Lid include:

Difficulty in closing or latching the lid properly
Visible cracks or damage
A malfunctioning or damaged lid sensor, leading to the washer not recognizing when the lid is closed.

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You A broken lid to my washer. Chapman D. • Vienna , VA • April 07, 2020

Watched a YouTube video. Read more

$282.95

Compare At:: $336.71
You Save:: $53.76

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Door Switch

4.9 (60)

By: Whirlpool

Part Number: W11396033

The Door Switch is an OEM part for Whirlpool refrigerators. This switch is crucial for controlling the interior lights and the activation of certain refrigerator functions when the door is opened or closed.

Symptoms of a failing Door Switch include:

Interior lights staying on when the refrigerator door is closed
Interior lights not turning on when the door is opened
The refrigerator unexpectedly starting or stopping
Alarms or indicators malfunctioning, signaling an open door when it is closed

Causes of a bad door switch can involve mechanical failure due to wear and tear from frequent use, damage from impacts (such as slamming the door), or electrical issues like a short circuit or faulty wiring.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Light switch on bottom freezer compartment flakey (intermittant) Alfred M. • Pahoa , HI • September 07, 2014

I watched the video on replacing the switch on a side freezer where prying out to original switch did not look difficult. I then got on the floor and tried to pry out my switch. Had a terrible time (locking tab or switch body hardened with time?) and mangled the switch terribly and the upper panel of the freezer somewhat, but the switch did come out. AND THEN the top freezer panel with the switch and light assembly fell out into my hands! I was able to unplug one Molex connector and the... Read more

$29.30

Compare At:: $34.87
You Save:: $5.57

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Lid Latch Assembly

4.9 (30)

By: Whirlpool

Part Number: W10810403

The Latch is an OEM part for Whirlpool dishwashers. It is essential for securing the dishwasher door during operation, ensuring that the door stays closed and the dishwasher can run its cycles effectively. The latch mechanism also engages the door switch, which signals the dishwasher to start its cycle.

Over time, latches can wear out or become damaged due to repeated use, exposure to moisture, or accidental force. A malfunctioning latch can prevent the dishwasher from starting or lead to leaks during operation.

Symptoms of a bad Latch include:

Dishwasher door not staying closed
Dishwasher not starting
Leaks around the door during a wash cycle
The door latch feeling loose or not engaging properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: This lock has a White bezel. For the Grey bezel, order W10861642.

Do-It-Yourself Stories from Customers like You F5 e3 error code. Charles H. • Pearland , TX • April 20, 2018

Replaced the door latch/lock assembly. Read more

$76.95

Compare At:: $93.93
You Save:: $16.98

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Maytag Strike Asm, Lid, Gls, Gry

5.0 (6)

By: Whirlpool

Part Number: W11457841

The Whirlpool Lid Strike is an OEM replacement part for Whirlpool top-load washing machines. Located at the top of the washer, the strike assembly securely holds the outer lid assembly in place.

Causes of a bad strike assembly washer can include cracks or breaks from stresses and vibrations over time, worn-out fasteners loose from use, or damage from forced lid closures.

Symptoms of a bad strike assembly washer include:

Loose, wobbly lids allowing items to fall inside during loading
Inability to tightly secure lids with fasteners becoming stripped
Clunking or banging noises coming from the lid area during cycles
Scratches or marks on surrounding surfaces from misalignment

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore top-load washer models.

Do-It-Yourself Stories from Customers like You Lid wouldn't lock on washing machine Tim K. • P.O. Box 644 Sheridan , MT • August 12, 2025

Ordered parts from Appliance Parts Pros and replaced them.Works like new Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Maytag Obstructed Lid Switch Door Lock Parts

Maytag Dryer Door Switch

Maytag Range Surface Element Switch

Maytag Door Latch Kit

Maytag Lid Lock Assembly

Maytag Lid Latch Assembly

Maytag Lid Switch

Maytag Detergent Dispenser

Maytag Dual Element Control Switch

Maytag Catch

Maytag Infinite Switch Top Burner Control Switch

Maytag Dryer Door Catch

Maytag Dryer Lint Screen Grille

Maytag Lid

Maytag Door Switch

Maytag Lid Latch Assembly

Maytag Strike Asm, Lid, Gls, Gry

Appliance Type