Turn Power Line Mover Spark Plug Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3392519
Stop dryer downtime in its tracks — install the Whirlpool WP3392519 OEM Thermal Fuse in minutes.
OEM Quality Fast 1–2 Day Shipping* Free Tech Help
Why choose this fuse?
- Guaranteed OEM: built by Whirlpool to Whirlpool specs — no risky aftermarket clones.
- Broad compatibility: works with Whirlpool, Kenmore, Maytag, KitchenAid, Roper & more.
- Quick delivery: over 94 % of APP orders arrive in 2 days or less.
Fixes these common dryer problems
| Problem |
How the fuse is involved |
| Dryer won’t start |
Blown fuse interrupts motor circuit |
| No heat / not enough heat |
Heater circuit disabled for safety |
| Cycle ends early |
Over-temp trip stops cycle |
| Control panel dead |
Power to controls interrupted |
4-step DIY installation (≈10 min)
- Unplug dryer and remove rear panel.
- Locate thermal fuse on blower housing.
- Transfer wires; secure new fuse with ¼-inch nut-driver.
- Clean the vent & lint path before testing to prevent repeat failure.
*Video tutorial below.
Ready to get heat back?
Click Add to Cart now & enjoy industry-leading 1–2 day delivery on
This part fixes the following symptoms
-
Won't start
-
Timer will not advance
-
No heat or not enough heat
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
No heat Dennis G. • Kearny , NJ • January 14, 2017
I did the recommended checks of parts as listed on the website. I would recommend as one other person did but I did not listen the first time and that is to check all the parts don't stop at the first part you find bad. As I had to make two orders paying shipping twice because I thought I found a bad part when testing the igniter but the thermal fuse was also bad and since in a different part of the machine I did not take the time to check it, bad mistake.
Also one tool mentioned in the video...
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387134
This Dryer Cycling Thermostat is an OEM replacement part for Whirlpool dryers. It monitors internal temperatures and cycles power to the heating element accordingly. The thermostat ensures the drying air reaches and maintains the optimal heat level selected for fast, effective drying results.
Symptoms of a bad cycling thermostat include:
- The dryer not heating or heating inconsistently
- Frequent trips of the circuit breaker
- Slower than normal drying times
- Burned clothes due to overheating
Causes of failure may be related to normal wear over time, dust buildup affecting sensor readings, or incorrect thermostat calibration.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too hot
-
Timer will not advance
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015
After 22 years my Kenmore (Whirlpool) dryer stopped getting hot.
So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat.
Here is a rundown of what I did and how long it took:
• Taking the back off and vacuum <1 minute
• Finding the components (from the...
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 279816
This dryer thermal cut-off kit is an authentic OEM replacement part for Whirlpool and Kenmore dryers. It is designed to prevent the dryer from overheating.
This Kit Includes:
- High Limit Thermostat (250°F Limit)
- A Cut Off Fuse (309°F Limit)
- Female Spade Terminals
- Jumper Wires
Over time, these components can fail due to electrical issues, lint buildup blocking the exhaust vent, or normal wear and tear. A malfunctioning thermal cut-off kit can result in overheating, which can pose a safety hazard and affect the dryer’s performance.
Symptoms of a bad Thermal Cut-Off Kit include:
- Dryer not heating
- Dryer overheating
- Dryer shutting off mid-cycle
- No response when attempting to start the dryer
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Timer will not advance
-
No heat or not enough heat
-
Too hot
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015
After 22 years my Kenmore (Whirlpool) dryer stopped getting hot.
So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat.
Here is a rundown of what I did and how long it took:
• Taking the back off and vacuum <1 minute
• Finding the components (from the...
Read more
More
$45.95
- Compare At:
-
$55.14
- You Save:
-
$9.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577274
The Thermistor is an OEM part for Whirlpool brand dryers. It is a temperature-sensing resistor that monitors air temperature changes during the drying cycle. The thermistor provides feedback to the control board on heating element performance and internal air condition.
Symptoms of a failed thermistor include:
- Inaccurate temperature readings and selections
- Improper or incomplete drying
- Safety issues from overheating due to lack of feedback
- Error codes displayed on the control panel
Causes can be related to normal wear and environmental exposure over time. Failure prevents the dryer from achieving optimal drying conditions.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too hot
-
Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You
First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017
I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer.
Started by ordering a thermal fuse because it was...
Read more
More
$35.58
- Compare At:
-
$41.98
- You Save:
-
$6.40
Genuine Lg part
By: Lg
Part Number: 6931EL3003D
The Hi Limit Thermal Fuse is an OEM part for LG dryers. This fuse is a safety device that protects the dryer from overheating by cutting off power to the heating element if the dryer’s temperature exceeds a safe limit. It ensures that the dryer operates within safe temperature ranges, preventing potential fire hazards.
Replace the hi limit thermal fuse if it becomes faulty due to wear and tear, a buildup of lint, or exposure to high temperatures over time. A malfunctioning fuse can compromise the dryer’s ability to regulate heat properly.
Symptoms of a bad hi limit thermal fuse include:
- The dryer not heating
- The dryer shutting off unexpectedly during a cycle
- No response from the dryer when attempting to start a cycle
- Extended drying times due to lack of heat
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Lg dryer no heat Jeffrey J. • Emerald Isle , NC • June 06, 2016
Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same...
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Samsung part
By: Samsung
Part Number: DC32-00007A
The Dryer Thermistor Temperature Sensor is an essential component for maintaining the optimal performance of your dryer. This genuine OEM part ensures accurate temperature readings, helping your appliance regulate heat effectively and dry clothes efficiently. By replacing a faulty thermistor with this high-quality sensor, you can restore your dryer's functionality and prevent overheating or under-drying issues. Designed specifically for Samsung dryers, the Dryer Thermistor Temperature Sensor guarantees a perfect fit and reliable operation. Its precision engineering supports consistent drying cycles, enhancing energy efficiency and extending the lifespan of your appliance. Installing this sensor is straightforward, allowing you to quickly get your dryer back to working condition without the need for professional assistance. Choose the genuine OEM part for peace of mind and confidence in your dryerGÇÖs performance, ensuring your laundry routine remains smooth and hassle-free.
This part fixes the following symptoms
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Samsung dryer model# DV42H5200EW would not heat no error codes otherwise operating normally. James S. • Washington , DC • October 20, 2017
You can do this!
Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional.
My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and...
Read more
More
$30.54
- Compare At:
-
$36.04
- You Save:
-
$5.50
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3977767
The Hi-Limit Thermostat is an OEM part for Whirlpool dryers. It functions as a critical safety device that monitors and controls the temperature within the dryer, preventing it from overheating. When the dryer reaches a temperature that is too high, this thermostat will cut off the power to the heating element to mitigate the risk of fire.
Symptoms of a bad Hi-Limit Thermostat include:
- Dryer not heating adequately or at all
- Clothes taking longer than usual to dry
- The dryer repeatedly shutting off during a cycle
- Excessive heat emitted from the dryer even on lower settings
Causes of a bad Hi-Limit Thermostat can include a malfunction due to electrical issues, lint buildup causing restricted airflow and increased temperature, or failure of other components like the cycling thermostat that can cause the dryer to overheat.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Clothes dryer was not heating Joseph N. • Dallastown , PA • December 07, 2016
I used the Appliance Parts Pros d.i.y. video to get some oversight on the repair; ordered the parts (heating element, Hi-Limit T-stat and Dryer Thermal Cut-Off kit).
I unplugged the electric; disconnected the exhaust duct; moved the clothes dryer so that I could remove the back sheet metal panel. The electrical connection at the heater "Stacon" terminal was corroded and broken - an open circuit. This had happen about 10 years before and I was familiar with this problem. After removing the...
Read more
More
$19.95
- Compare At:
-
$23.94
- You Save:
-
$3.99
Genuine Samsung part
By: Samsung
Part Number: DC47-00016A
The Dryer Thermostat is an essential component for maintaining the optimal performance of your Samsung dryer. This genuine OEM part ensures precise temperature regulation, preventing overheating and enhancing the safety of your appliance. Designed specifically for Samsung dryers, it guarantees a perfect fit and seamless integration with your existing system. With accurate temperature control, this thermostat helps your dryer operate efficiently, reducing energy consumption and extending the lifespan of your machine. Installing the Dryer Thermostat is straightforward, allowing you to quickly restore your dryer's functionality without hassle. By choosing this genuine OEM part, you can trust in the quality and durability that Samsung is known for, ensuring your dryer performs at its best for years to come. Whether you are replacing a faulty thermostat or upgrading your dryerGÇÖs components, the Dryer Thermostat offers the reliability and performance you need for a smooth and efficient drying experience. Invest in this high-quality thermostat to keep your laundry routine running seamlessly and enjoy the benefits of a well-maintained dryer.
Do-It-Yourself Stories from Customers like You
Samsung dryer model# DV42H5200EW would not heat no error codes otherwise operating normally. James S. • Washington , DC • October 20, 2017
You can do this!
Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional.
My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and...
Read more
More
$25.95
- Compare At:
-
$31.14
- You Save:
-
$5.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 279973
The Thermal Cut-Off Kit is an OEM replacement part for Whirlpool dryers, responsible for protecting the dryer from overheating by interrupting the power flow to the heating element if the dryer air temperature reaches a dangerously high level.
Symptoms of a bad Thermal Cut-Off Kit include:
- The dryer not heating up
- Excessive heat buildup within the dryer drum
- Clothes not drying properly
Causes of failure can include restricted airflow from a clogged lint filter or venting system or a malfunctioning heating element causing excessive temperatures. These issues can lead to the thermal cut-off being triggered to prevent overheating, necessitating the replacement of the kit.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Note: It's possible some models may use part number 280148 in place of this. Look at photo's for verification.
Do-It-Yourself Stories from Customers like You
First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017
I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer.
Started by ordering a thermal fuse because it was...
Read more
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387223
The Moisture Sensor Bar is an OEM replacement part for Whirlpool dryers. It is a component located inside the dryer drum that senses the moisture level of clothes during tumble drying cycles. The moisture sensor bar utilizes sensors or probes to gauge how dry clothes are getting and signals the dryer to shut off once clothes reach the desired dryness level selected by the user.
Symptoms of a bad moisture sensor bar include:
- Dryer failing to shut off automatically at the end of cycles, leaving clothes over-dried
- Cycles taking excessively long to complete
- Dryer not sensing moisture levels properly to allow automatic ending of cycles
Causes of a faulty moisture sensor bar are usually due to normal wear and tear over time. Dust or lint buildup can also affect its ability to provide accurate readings.
This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017
I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer.
Started by ordering a thermal fuse because it was...
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP338906
The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.
Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.
Symptoms that may indicate a faulty flame sensor include:
- The dryer not heating or producing heat properly
- Error codes related to the gas system or ignition failure
- The dryer shutting off unexpectedly during cycles
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models.
This part fixes the following symptoms
-
Shuts off too soon
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes Jay W. • Dallas , TX • April 05, 2015
I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Lg part
By: Lg
Part Number: 6931EL3002M
The Dryer Blower Thermostat is an OEM replacement part for LG dryers. It plays a role in regulating the operation of the blower motor, which is responsible for circulating hot air throughout the dryer during the drying cycle.
Causes of a bad dryer blower thermostat can include electrical malfunctions, physical damage, or simply wear and tear over time.
Symptoms of a bad dryer blower thermostat include:
- The dryer not heating up properly or taking longer to dry clothes
- The blower motor failing to turn on or running continuously
- Inconsistent or inadequate airflow during the drying cycle
- Error codes or fault indicators related to the thermostat or blower motor
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg dryer no heat Jeffrey J. • Emerald Isle , NC • June 06, 2016
Checked and cleaned vent which was in need of cleaning, but not too bad (I do not consider this a primary causal detail, but can be a problem, so clean yours). Replaced Hi-Limit Thermostat (safety thermostat) after confirming the circuit was open with ohm meter. While I was in there, I completely cleaned the heater and ducting and internal workings of the dryer. Confirmed the heater coils were good via 20ohm, 20ohm, 40ohm readings (LG service manual has wrong readings). Two weeks later, same...
Read more
More
$38.95
- Compare At:
-
$46.74
- You Save:
-
$7.79
Genuine Lg part
By: Lg
Part Number: 6500EL3001A
The Dryer Moisture Sensor Bar is an OEM part for LG dryers. It plays a critical role in detecting the moisture level of clothes during the drying cycle, enabling the dryer to adjust the drying time automatically. This ensures efficient operation, preventing over-drying, which can damage fabrics and increase energy consumption.
Symptoms of a bad Dryer Moisture Sensor Bar include:
- Clothes remaining damp after a complete drying cycle
- The dryer continually running without stopping
- Inconsistent drying results, with some clothes over-dried and others still wet
Causes of a bad moisture sensor bar can stem from a buildup of lint and fabric softener residue, which insulates the sensor and impairs its ability to accurately detect moisture. Additionally, wear and tear or damage from loading and unloading can affect its functionality.
Regular cleaning and maintenance are recommended to ensure that your LG dryer operates efficiently and preserves the life of your clothes.
Do-It-Yourself Stories from Customers like You
It wouldn't heat James C. • Mooresville , NC • June 29, 2019
After I cleaned out the typical 1.5 pounds of lint from the vent, ( I do it every 2 months), I went searching for a solution. I found 6 possible causes on this site and purchased everything except a new burner; I wasn't going to go that far. Let the fun begin. Since my vacuum was still nearby, I thought I was ready for anything. Wrong. After I watched all the videos again for reassurance, I went in with screwdriver in hand and laptop nearby. I removed the top and looked inside. Don't be fooled,...
Read more
More
$20.62
- Compare At:
-
$24.54
- You Save:
-
$3.92
Genuine Whirlpool part
By: Whirlpool
Part Number: 279769
The Thermal Cut-Off Kit is an OEM part for Whirlpool dryers. This safety kit is designed to protect the dryer from overheating by interrupting the heat source when the dryer air temperature reaches dangerously high levels. The kit typically includes one high-limit thermostat and one thermal cut-off fuse. These components are critical for preventing potential fire hazards by ensuring that the dryer operates within safe temperature ranges.
Symptoms of a failing thermal cut-off kit include:
- Dryer not heating up at all, as the thermal fuse may have been triggered
- Excessive heat in the dryer, prior to the fuse being triggered
- Frequent stopping of the dryer during cycles
Causes of thermal cut-off failure often involve restricted airflow (from lint buildup or obstructed vents), component failure within the heating system, or issues with the dryer cycling thermostat that cause abnormal heating.
This OEM part is also compatible with Kenmore, Maytag, KitchenAid, Roper, and other brands manufactured by Whirlpool.
This part fixes the following symptoms
-
No heat or not enough heat
-
Too hot
See more...
Do-It-Yourself Stories from Customers like You
Old Whirlpool dryer model LE8650XWW0 would not heat purchase in 1993. Byron V. • Huntsville , AL • December 08, 2017
Since the dryer was 24 years old I opted to replace all the possible problem components, instead of just the bad one. The parts aren't that expensive and do to their age I figured it was worth it to avoid having to go back into the dryer in a few months. The repair was surprisingly easy and went pretty much as the video instruction AppliancePartPros provided with one exception. Because, my model was much older than that used in the video, I had a more difficult time replacing the Heating...
Read more
More
$34.95
- Compare At:
-
$41.94
- You Save:
-
$6.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W10861000
The Detergent Dispenser is an OEM part for Whirlpool dishwashers. It plays a crucial role in the dishwasher's operation by dispensing detergent and rinse aid at the precise moments during the wash cycle. This ensures dishes are thoroughly cleaned and dried without residue.
Causes of dispenser failure can range from mechanical issues such as a faulty spring or latch, blockages within the dispenser itself, or electronic problems affecting the timing and release of detergent.
Symptoms of a bad Detergent Dispenser include:
- Failure to dispense detergent properly, leading to dishes not being cleaned effectively.
- Rinse aid leakage, which can result in streaky and spotty dishes.
- The dispenser door sticking or failing to open during the wash cycle.
- Unusual noises coming from the dispenser mechanism.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Soap dispenser not functioning Gary K. • Durango , CO • October 28, 2018
The part went on easily. U Tube video answered any questions I had before installing.
Read more
More
$79.74
- Compare At:
-
$99.67
- You Save:
-
$19.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3390719
The Thermal Fuse is an OEM part for Whirlpool dryers. It is a critical safety component designed to protect the dryer from overheating by blowing and cutting off power if the temperature exceeds safe limits. This disposable, one-time fuse is essential for preventing potential fire hazards and ensuring the appliance operates within safe temperatures.
Symptoms of a bad Thermal Fuse include:
- The dryer not starting or suddenly stopping during a cycle
- No heat being produced while the dryer is running
- Unexplained cessation of all dryer functions
Causes of a bad thermal fuse can stem from restricted airflow due to lint buildup, a malfunctioning heating element that causes excessive temperatures, or other electrical issues within the dryer.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
My maytag bravos xl dryer would not dry properly it would run but with very little heat cycles were twice as long as previous to get clothes dry Mike C. • Lawrenceburg , IN • May 11, 2015
I replaced the "heating element" which was bad.........as well as the "Thermst-fix" and "Thermal Cutoff" which are located on the side of the element mounting location while I had the dyer all opened up and the element mounting tube removed.......I also replaced the Dryer Thermister which is located on the top of the blower fan.....To get to these parts, you must open the top of the dryer which has spring latches on both sides of the front corners... they need to be pressed in (use a putty...
Read more
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79