Parts for Kenmore 796.81582410 (79681582410, 796 81582410): Drum And Tub Parts

Complete drum assembly for LG dryers. Includes inner drum with front and rear seals pre-installed. Replace if cracked, broken, or damaged from wear.

Dryer not heating or taking too long to dry? The heating element generates heat for drying. Front panel removal required. Video guide available.

Secures the heating element assembly inside your dryer drum housing. Replace if bracket is bent, cracked, or missing to properly support the heater unit.

Interior drum baffle lifts and tumbles clothes during drying. Replace if cracked, broken, or detached from drum wall. Mounts with screws to drum exterior.

This is a four ribbed poly V belt.

Dryer not heating or takes multiple cycles to dry? This hi-limit thermal fuse cuts power when temps exceed safe limits. Moderate DIY repair, about 1 hour.

Replace your dryer drum seal when clothes take longer to dry or you notice lint buildup. Maintains heat efficiency and prevents air leaks. Confirm fit with your model number.

Dryer won't heat or overheating? This hi-limit thermostat regulates temperature and prevents overheating. 10-minute DIY fix with video guide.

Duct assembly for dryer exhaust venting. Connects dryer to external vent. Replace if cracked, disconnected, or missing for proper airflow routing.

Dryer won't tumble or makes loud noise? This complete drum assembly restores proper rotation and quiet operation. Major repair, 2-3 hours for experienced DIYers.

Dryer drum light not working or bulb melted in socket? This interior light socket assembly restores illumination. Simple push-in installation.

Illuminates your dryer drum for easy loading and unloading. Replace when burned out or flickering. Verify fit with your model number before ordering.

Protects the interior drum light in your dryer. Replace if cracked, broken, or damaged from heat exposure. Confirm fit with your model number.

Channels exhaust air from your dryer to the home vent. Replace if cracked, disconnected, or worn to restore proper airflow and reduce lint buildup.

Drum support roller assembly for dryers. Installs inside the cabinet to support the drum during rotation. Replace when worn, flat-spotted, or broken.

This is an authentic OEM drum support roller sourced directly from the manufacturer for use in clothes dryers. During the drying cycle, the drum turns and tosses the clothes around to distribute heat. This drum support roller holds the drum in place as it rotates. Over time, the heat from the dryer can lead to the roller becoming worn. If the dryer is making squealing sounds or thumping when operating, the support roller is worn out and should be replaced. Before replacing the drum support roller, make sure the power is disconnected from the dryer. Remove the top and front panel of the dryer to reach the drum. The idler pulley and dryer belt are underneath the drum; remove these and then take the drum out of the unit and set it aside. Remove the mounting bracket holding the worn drum support roller. Remove and replace the worn roller. While the dryer is apart, inspect the remaining support rollers. Reverse the steps used and put the dryer back together. Power the dryer and make sure the drum turns.This is a black and white, rubber and metal part that is individually sold. It does not come with assembly hardware. This drum support roller is designed for dryers manufactured by LG, Kenmore, and General Electric.

Captures lint and debris from laundry to prevent vent clogs. Replace if torn, cracked, or clothes snag on it. Confirm fit with your model number.

Houses the lint filter to capture debris during drying. Replace if cracked, causing clothes to snag or tear. Confirm fit with your model number.

Secures the lint filter in proper position to prevent clothes snagging. Replace if cracked, warped, or filter sits unevenly. Confirm fit with your model.

Cover that fits over the dryer's lint filter duct area. Replace if cracked, broken, or missing to keep items from falling into the duct when filter is removed.

Distortion spring that applies tension within the dryer mechanism. Replace if fatigued, broken, or missing to restore proper tension and assembly function.

Dryer not sensing when clothes are dry? Replace the moisture sensor bar to restore auto-dry cycles. Moderate DIY repair with video guide available.

Dryer won't auto dry or cycles run too long? This moisture sensor wire harness connects sensor bars to control. Restores accurate dry cycles. DIY-friendly.

Secures the moisture sensor inside your dryer drum. Replace if the holder is cracked, broken, or missing to restore proper sensor positioning and function.

Directs steam spray into the dryer drum during Steam/Refresh cycles. Replace if nozzle is clogged, cracked, or leaking to restore proper mist distribution.

Fix loud banging, grinding noise, or poor drying performance with a new dryer blower wheel. Restores proper airflow through drum and exhaust vent.

Hardware fasteners for dryer assembly and repairs. Includes screws, nuts, and washers to secure panels, drums, or components. Replace missing or stripped.

Dryer not drying efficiently or making loud noise? A cracked blower housing disrupts airflow. This assembly restores proper air circulation for quiet operation.

Duct assembly channels air from dryer drum to blower and exhaust. Replace if cracked, warped, or missing to restore proper airflow and prevent lint bypass.

Slide guide assembly that supports and aligns moving dryer components. Replace if cracked, broken, or worn to restore smooth tracking and operation.

Dryer not heating properly or overheating? The thermistor monitors drum temperature and signals the control board. Moderate DIY repair.

Dryer not heating or shutting off mid-cycle? A faulty blower thermostat disrupts airflow regulation. Front-access repair with basic tools in 30-60 minutes.

Metal mounting bracket that secures internal dryer components to the frame. Replace if cracked, bent, or broken to restore proper alignment and stability.

Dryer won't spin or just hums? This drum motor assembly restores tumbling action. DIY-friendly repair takes 45-60 minutes with basic tools and video guide.

Secures hoses, tubing, and wiring to prevent rubbing and vibration in your dryer. Replace when clips break or lines become loose. Confirm fit with your model.

Dryer won't turn off when belt breaks? This safety switch detects belt failure and shuts down operation. Direct-fit replacement, moderate DIY repair.

Maintains tension on your dryer's drum belt for smooth rotation. Replace if pulley wheel is cracked, shaft worn, or assembly moves excessively during operation.

Idler pulley maintains tension on the dryer belt. Replace if worn, cracked, or causing belt slippage. Installs between motor and drum support system.

Replacement mounting screw for dryer assemblies. Secures brackets, panels, and internal components. Order when original fastener is missing, stripped, or corroded.

Self-tapping screw secures panels, brackets, and components inside your appliance. Replace stripped, corroded, or missing screws to restore secure fit.