Parts for Kenmore 795.70333411 (79570333411, 795 70333411): Other Parts

The Water Filter is an OEM replacement part for LG refrigerators. It is designed to remove impurities, contaminants, and unwanted particles from the water supply, ensuring that the water dispensed and used for ice making is clean and fresh.

Symptoms of a need to replace the water filter:

• Unpleasant taste or odor in the water or ice
• Decreased water flow from the dispenser
• Discoloration or sediment visible in the dispensed water

Causes of a faulty water filter can include general usage over time, exposure to high levels of contaminants in the water supply, or physical damage or clogging of the filter media.

This OEM LG part is also compatible with some Kenmore refrigerator models.

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

This customized replacement screw secures appliance components and restores proper fit and function. It's a direct-fit fastener designed for use where the OEM specifies a tailored screw to replace a worn, stripped, or missing fastener. What it does

• Fastens panels, brackets, or assemblies that use a manufacturer-specified customized screw
• Stops rattling or loose parts caused by worn or missing hardware
• Restores secure mounting for affected components
• Matches the OEM shape and thread pattern to prevent damage when used as directed

• Disconnect power and water before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Install by hand initially, then tighten snugly—do not overtighten to avoid thread damage
• Keep removed hardware organized so you replace parts in their original locations

This customized screw secures internal components and panels in compatible appliances, providing a reliable fastener that restores proper fit and function. Use it when factory screws are missing, stripped, or damaged. What it does:

• Fastens panels, brackets or assemblies to maintain structural alignment and prevent rattles
• Replaces stripped, corroded or missing mounting screws that can cause loose parts or vibration
• Restores secure connections for controls and internal components to help appliances operate quietly
• Works where the OEM called for a non-standard or modified screw shape/length

• Use the correct screwdriver or bit to avoid stripping the head; avoid overtightening
• Turn power off and unplug the appliance before accessing internal components
• Compare replacement to the original screw for length, thread and head type before installation

This adjustable leveling leg assembly supports and stabilizes your appliance by threading into the base frame. Replacing a worn or missing leg helps you level the unit for smoother, quieter operation on uneven floors.

• Provides height adjustment to level the appliance and distribute weight evenly
• Helps prevent rocking, wobbling, and excess vibration or rattling
• Can improve door alignment and smooth opening/closing when the cabinet is properly leveled
• Useful when a leg is missing, damaged, or threads are stripped

• Disconnect power; if applicable, shut off the water supply
• Use a helper to safely brace or tip the unit; protect flooring when accessing the leg
• Unthread the old leg and hand-thread the new one; tighten as needed
• Adjust front-to-back and side-to-side until stable; all legs bear weight evenly

This duct assembly routes internal airflow in the appliance, replacing damaged or worn vent tubing to restore proper air movement. It helps reduce air leaks and airflow-related performance issues when the original duct is compromised. What it does:

• Channels blower air from the fan housing to the exhaust path to maintain proper ventilation.
• Replaces collapsed, torn or disconnected ducting that can cause poor airflow.
• Addresses symptoms such as reduced drying/cooling performance, longer cycles, or warm cabinet air.
• Helps eliminate drafty or noisy airflow caused by gaps or damaged duct sections.

• Disconnect power (and turn off gas supply for gas appliances) before beginning service.
• Access may require removing rear or lower access panels; keep hardware organized for reassembly.
• Inspect and replace any damaged clamps, seals or gaskets during installation for a proper seal.

The Freezer Tray Roller is an OEM part for LG refrigerators. It is a dual roller wheel assembly located at the rear wall of the freezer compartment. The roller aids sliding shelf movement by reducing friction between trays and the liner wall. 

Causes of a bad freezer tray roller include cracks, flat spots, or separated roller pieces from wear over years of use.

Symptoms of a bad tray roller are:

• Difficulty sliding shelves smoothly in and out of position
• Excessive force required to access stored items
• Noisy operation or rattling noises within the freezer

This genuine LG OEM replacement part is also compatible with some Kenmore models.

The Freezer Basket is an OEM replacement part for LG French door refrigerators. Located inside the bottom of the freezer compartment, this removable basket provides convenient storage and organization of meats, frozen vegetables, and other bulk items.

Causes may involve impact or puncture damage, excessive bending resulting in fractures, or broken retaining tabs that secure the basket in place.

Symptoms of a damaged freezer basket include:

• Food container stopping secure and sliding around inside
• Basket cracking or splitting underweight of heavy loads
• Difficulty removing or replacing the basket

This part is also compatible with Kenmore models.

Refrigerator shelf assembly that replaces a damaged or missing internal shelf, restoring flat, secure storage for food and containers. Helps keep items level and organized inside the fridge. What it does

• Replaces a broken, cracked, or missing refrigerator shelf to restore usable storage space.
• Provides a flat, stable surface for jars, bowls, and containers so items won't tip or slide.
• Prevents food from sagging between compartments and improves organization and accessibility.
• Matches factory-fit shelf mounts and seating points for correct alignment when installed.

• Remove all items from the shelf area before installing; handle glass or trim with care and wear protective gloves if needed.
• Slide or seat the shelf into the factory supports or track until it clicks or sits flat; some models require lifting slightly to engage rear tabs.
• No electrical disconnect is typically required, but follow the refrigerator owner's manual and disconnect power if instructed for your model.
• If the shelf has clips or trim pieces, verify they are properly engaged and undamaged before use.

Note: Looking at the diagram, this is item# 141B and it does not include the metal frame shown in the picture. The assembly with the frame is item# 141A and is no longer available from the factory. 

Note: Looking at the diagram, this is item# 141B and it does not include the metal frame shown in the picture. The assembly with the frame is item# 141A and is no longer available from the factory. 

This is the replacement glass panel for your refrigerator shelf. It restores a flat, easy-to-clean surface and helps contain spills when the original shelf glass is cracked or missing, so you can safely organize and store items again.

• Replaces damaged or missing shelf glass to maintain a safe, level storage surface
• Helps contain drips and spills to the shelf area for easier cleanup
• Supports food items when properly seated in the existing frame or support rails
• Common symptoms: broken, cracked, sagging, rattling, or missing shelf surface

• Unplug the refrigerator and wear cut-resistant gloves when handling glass
• Remove food, slide out the shelf or frame, and lift out the damaged glass
• If your shelf uses a frame or trim, transfer it to the new panel
• Seat the glass fully and evenly before reinstalling and loading items

This guide rail secures and guides a sliding compartment for smooth opening and closing, restoring proper alignment and movement. Designed to replace a worn, bent, or broken rail so drawers or racks glide reliably. What it does

• Guides a drawer or rack along its track to maintain smooth, even motion
• Restores alignment when the compartment drags, sticks, or shifts
• Replaces bent, cracked, or worn rail that causes noisy or uneven movement
• Helps prevent further wear to the sliding assembly by re-establishing correct travel

• Unplug the appliance or shut off power before beginning service
• Remove the drawer/rack and any obstructions to access the rail mounting points
• Inspect mating hardware and slides; replace any damaged components for best results
• Use common hand tools; for model-specific instructions

This guide rail keeps a refrigerator/freezer drawer aligned and sliding smoothly, restoring proper drawer movement and preventing jamming or uneven closing. Designed to match the original mounting points for a secure fit. What it does:

• Guides and supports the drawer as it opens and closes to ensure smooth, even travel
• Replaces worn or bent rails that cause sticking, binding, or misalignment
• Reduces rattling or noisy operation from a loose or damaged slide
• Helps maintain proper drawer sealing and alignment for consistent performance

• One guide rail

• Disconnect power to the appliance and empty the drawer before starting
• Remove trim or stops as required to access mounting screws; retain all fasteners if reusable
• Align rail with original mounting holes and secure with the correct screws; do not overtighten

This duct assembly routes internal airflow in the appliance, replacing damaged or worn vent tubing to restore proper air movement. It helps reduce air leaks and airflow-related performance issues when the original duct is compromised. What it does:

• Channels blower air from the fan housing to the exhaust path to maintain proper ventilation.
• Replaces collapsed, torn or disconnected ducting that can cause poor airflow.
• Addresses symptoms such as reduced drying/cooling performance, longer cycles, or warm cabinet air.
• Helps eliminate drafty or noisy airflow caused by gaps or damaged duct sections.

• Disconnect power (and turn off gas supply for gas appliances) before beginning service.
• Access may require removing rear or lower access panels; keep hardware organized for reassembly.
• Inspect and replace any damaged clamps, seals or gaskets during installation for a proper seal.

The Tray Asm is an OEM part for LG refrigerators. It is designed to store fruits and vegetables at optimal humidity levels, helping to keep produce fresh for longer periods. It has approximate measurements of 30 inches in length, 18 inches in width, and 4 inches in height.

Causes of a bad tray asm can include cracking or breaking due to frequent use, accidental dropping, or exposure to heavy loads that exceed its capacity. Over time, the plastic can also become brittle and more susceptible to damage.

Symptoms of a bad tray asm include:

• Cracks or breaks in the drawer
• Difficulty sliding the drawer in and out
• Produce not staying fresh as long
• The drawer not fitting properly in its compartment

This OEM LG part is also compatible with Sears/Kenmore models.

This Tray Cover Assembly is the replacement cover that restores the tray area's protection and appearance. It helps keep the tray enclosed and prevents debris from entering while maintaining proper fit and function. What it does

• Covers and protects the tray area to keep food, ice, or components free from debris.
• Helps maintain a finished appearance where the tray sits.
• Replaces cracked, warped, or missing covers that can allow contaminants into the tray area.
• Restores proper alignment and fit of the tray interface for reliable use.

• One Tray Cover Assembly as shown.

• High-level swap: this part typically fastens with clips or screws; align tabs and press or secure fasteners until seated.
• Turn power off and empty the tray area before replacing to avoid damage or spills.
• Inspect mounting tabs and adjacent components; replace any broken fasteners for a secure fit.

This vegetable tray assembly replaces a cracked or damaged crisper drawer and restores a secure, level shelf for storing produce. It provides the proper support and organization for fruits and vegetables in the refrigerator. What it does:

• Supports and contains fresh produce to prevent items from falling through or spilling
• Restores a smooth sliding drawer action when the original tray is broken or warped
• Helps keep produce organized and accessible on the refrigerator shelf
• Replaces worn or missing tray that can cause improper seating or uneven drawers

• Remove food and any loose items from the drawer area before beginning.
• Slide out the old tray and lift to remove; align and seat the new tray until it engages.
• No special tools typically required; refer to your refrigerator manual for model-specific instructions.
• Disconnect power and handle glass or trim components with care if removal of surrounding parts is necessary.

This vegetable tray assembly replaces a broken or missing crisper drawer in your refrigerator. Restore smooth, reliable storage for produce so fruits and vegetables stay organized and easy to access in the fresh food compartment.

• Replaces a damaged or missing crisper/vegetable drawer
• Holds produce in the fresh food section under the crisper shelf
• Slides in and out on the refrigerator's existing rails for easy access
• Common signs of failure: cracked bin, broken tabs/front, drawer jams or falls off track, reduced storage capacity

• Empty the area; remove the crisper shelf/glass if required by your model
• Align the drawer with the existing rails and slide in—do not force
• Allow plastic parts to warm to room temperature before installation to reduce risk of cracking
• Wear cut-resistant gloves and handle any glass components carefully

A replacement rear cover assembly that restores the TV's outer housing and protects internal electronics from dust and damage. Replaces cracked or warped back panels to return the set to a secure, finished condition. What it does:

• Replaces a damaged or cracked rear housing panel so internal parts are covered and protected.
• Secures mounting points and internal boards to reduce rattles and improve structural fit.
• Covers ports and vents to help prevent dust buildup and foreign-object contact.
• Restores the TV's exterior finish where the original back panel is warped, broken, or missing.

• Unplug the TV and place it on a soft, flat surface before beginning work.
• Keep and match all screws and fasteners; many panels use small clips that can break if handled roughly.
• Remove and install panels slowly to avoid damaging mounting tabs or internal cables.

This lamp cover is the replacement light lens that protects and diffuses the refrigerator's interior lamp, restoring even illumination and preventing direct bulb contact. Fits the original mounting for a clean, finished appearance. What it does:

• Protects the interior lamp from spills, splashes, and incidental contact
• Diffuses light for more even interior illumination
• Helps prevent direct exposure to the lamp bulb
• Restores a damaged, cracked, or yellowed lens to improve visibility

• One lamp cover / light lens

• Turn off power or unplug the appliance before replacing the lamp cover to avoid electric shock
• Handle the cover carefully to avoid cracking; use a soft cloth to seat into mounting tabs
• Remove and retain any fasteners or clips from the old cover for reinstallation if applicable
• Replace the bulb before seating the new cover

Replacement guide assembly that secures and aligns internal TV components and cabinet panels to restore proper fit and reduce movement. Use this guide when a panel or internal module sits loose or causes vibration or rattling. What it does:

• Positions and supports internal components and circuit boards to maintain correct alignment
• Secures cabinet panels and trim to prevent gaps and movement
• Reduces vibration and rattling caused by loose internal parts
• Helps maintain proper routing for internal cables and connectors

• Disconnect power and remove the TV from its stand or wall before starting repair
• Use proper tools and keep screws/fasteners organized; handle panels and the display with care
• Follow the OEM service manual for disassembly/reassembly steps and torque specs

This guide assembly is a replacement plastic/metal guide used to position and secure TV internal components and the display panel, restoring proper alignment and fit for affected TV assemblies. What it does:

• Keeps the display panel and internal modules aligned and secured to the TV chassis
• Prevents rubbing, vibration, and noise caused by loose or misaligned components
• Restores correct panel fit and gap alignment that can cause light leakage or uneven bezel fit
• Helps eliminate intermittent contact or pressure-related issues on adjacent parts

• One guide assembly

• Disconnect power and remove the TV from its stand before beginning repair
• Handle the display panel and circuit boards carefully to avoid damage from static or flexing
• Remove back cover and any obstructing brackets to access the mounting area; keep track of screws and small parts

This rail guide assembly supports and guides a sliding refrigerator drawer/bin so it opens and closes smoothly. Replace a cracked or worn rail to restore proper alignment and prevent jamming or the drawer coming off its track. What it does:

• Attaches to the cabinet wall to support the sliding drawer/bin
• Provides a smooth track for extension and retraction
• Keeps the drawer level and aligned to prevent binding or rubbing
• Failure symptoms include a hard-to-open/close drawer, tilting on one side, popping off track, or visible cracks/broken tabs on the rail

• One rail guide assembly

• Disconnect power and remove the affected drawer/bin (and any glass shelf above) before starting
• Remove mounting screws, note their locations, and lift out the damaged rail
• Position the new rail, reinstall screws, and ensure the drawer engages the slide correctly
• Use caution around sharp edges; test drawer movement before reloading

Restore smooth, stable sliding with this rail guide assembly. It supports and aligns the sliding mechanism so your pull-out drawer, bin, or rack opens and closes evenly and seats properly.

• Guides the slide so the drawer/bin/rack moves in and out smoothly
• Helps keep the moving component level and aligned for proper closing
• Replacing a damaged guide can resolve sticking, binding, uneven travel, or scraping/grinding noises
• Can help when the drawer/rack won't extend fully or won't stay closed/seat correctly

• Disconnect power and remove the drawer/bin/rack and its contents for access
• Note orientation and transfer any mounting hardware from the original guide
• Install the new guide in the same position and tighten fasteners securely
• Manually slide to verify smooth travel before reloading

The Freezer Door Gasket is an OEM part for LG side-by-side and bottom-freezer refrigerators. This gasket forms an important insulating seal around the freezer door compartment, preventing warm air from entering the sealed interior. Maintaining proper freezing temperatures depends on an intact door gasket.

Causes of a bad freezer door gasket can include cracks, deterioration, or compression from repeated opening and closing of the freezer door over time. Food debris trapped against the gasket rim can also damage sealing integrity.

Symptoms of a bad freezer gasket include:

• Difficulty closing or sealing the freezer door properly
• Warm air leaking into the freezer sections
• Frost and ice buildup occurring faster than usual
• Higher energy bills from the freezer running excessively

This replacement freezer door gasket from LG is also compatible with some Kenmore-brand refrigerators.

The Hinge Cover Assembly conceals and protects the door hinge area on your refrigerator. It safeguards wiring harnesses while restoring a clean, finished appearance, helping keep the hinge area secure and free of dust and damage.

• Protects the hinge mechanism and wiring for a clean, finished look
• Helps keep harnesses routed correctly and prevents snagging/abrasion near the hinge
• Replaces cracked, broken, loose, or missing hinge covers
• Helps reduce rattling or vibration noise from a loose/damaged cover

• Disconnect power before servicing.
• Support the door as needed; remove any screws or clips securing the old cover.
• Transfer and reuse existing hardware or clips if required; align the new cover and secure in place.
• Ensure wiring is not pinched; ensure smooth door movement before restoring power.

This is a direct-fit freezer door handle assembly that restores a secure, easy-to-grip pull for your freezer door. It replaces a cracked, loose, or missing handle so the door opens and closes with confidence. What it does:

• Replaces a damaged or broken freezer door handle to restore safe, reliable pulling force
• Stops looseness or wobble at the door edge and prevents further chipping or cracking
• Matches OEM mounting points for a crisp fit and correct alignment
• Improves door appearance by replacing a scratched or warped handle

• Basic hand tools are typically required; remove the old handle by unscrewing the mounting fasteners and install the new assembly in the same orientation
• Keep the door supported while removing or installing the handle to avoid pinching or misalignment
• Disconnect power only if removing interior trim or accessing electrical components; this handle replacement usually does not require power disconnection
• If fasteners or clips appear stripped or damaged, replace them with OEM-specified hardware for a secure fit

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This is the door handle mounting bracket assembly that secures the handle firmly to the door. It replaces a damaged or stripped bracket to restore a solid, wobble-free grip and reliable handle attachment.

• Mounts and secures the door handle to the door/frame
• Maintains alignment to prevent handle wobble or looseness
• Replaces cracked, broken, or stripped brackets to restore proper attachment
• Typical symptoms: loose or wobbly handle, handle pulls off, visible damage at the handle mount, rattling at the handle area

• Disconnect power before servicing and work carefully to avoid damaging the door surface
• Support the handle while loosening and tightening set screws or fasteners
• Retain and reuse original mounting hardware if it's in good condition
• Align the new bracket in the original location; do not overtighten fasteners

The Refrigerator Door Gasket is an OEM replacement part for LG refrigerators. It is a crucial component that seals the gap between the refrigerator door and the main body, creating an airtight seal to maintain the desired temperature and humidity levels inside the appliance. It has approximate dimensions of 2" x 41" x 20".

Symptoms of a bad refrigerator door gasket include:

• Warm air leaking into the refrigerator compartment
• Excessive frost or ice buildup in the freezer
• Condensation forming on the interior walls or shelves
• Higher energy consumption due to the refrigerator working harder to maintain the set temperature

Causes of a bad door gasket can include physical damage, such as tears or cracks, due to impact or wear and tear over time. It can also become stiff or lose its pliability, preventing a proper seal.

This OEM LG part is also compatible with Sears/Kenmore models.

The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature. 

Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.

Symptoms of a bad Refrigerator Flipper Assembly include:

• Difficulty in opening or closing the refrigerator door
• A noticeable gap when the door is supposed to be sealed shut
• Increased energy consumption as the refrigerator works harder to maintain its temperature
• Spoilage of food items quicker than expected due to poor temperature regulation

This OEM LG part is also compatible with some Kenmore models.

The Refrigerator Door Gasket is an OEM part for LG refrigerators. It's designed to create an airtight seal around the refrigerator door, preventing warm air from entering and cold air from escaping. The gasket is made from a flexible material that conforms to the door's edges, ensuring a snug fit against the refrigerator frame.

Causes of a bad door gasket include frequent opening and closing of the refrigerator door, exposure to harsh cleaning chemicals that can degrade the material, and natural wear and tear. 

Symptoms of a bad Refrigerator Door Gasket include:

• Condensation or frost buildup near the door edges.
• The refrigerator runs more frequently or for longer periods.
• A noticeable increase in your electricity bill.
• The gasket feels brittle or has visible cracks, tears, or gaps.

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Drawer Guide is an OEM part for LG refrigerators. This part allows the smooth and effortless operation of the refrigerator's drawers, ensuring they glide in and out with ease. 

Causes of a bad drawer guide can be attributed to wear and tear over time, misalignment during installation, or damage from excessive force or improper use of the drawers.

Symptoms of a bad drawer guide include:

• Difficulty opening or closing the drawers
• Drawers getting stuck or not sliding properly
• Excessive friction or resistance when operating the drawers
• Drawers becoming misaligned or tilted
• Unusual noises or grinding sounds when using the drawers

This OEM LG part is also compatible with some Kenmore models.

This replacement door basket restores door storage space and keeps bottles, condiments and small containers organized on the refrigerator door. It provides a secure shelf where the original bin is cracked, warped or missing. What it does

• Replaces a damaged or missing refrigerator door bin so items sit securely on the door
• Restores lost storage capacity for bottles, condiments and small containers
• Fits into existing door mounting tracks or snap locations to lock items in place
• Commonly used when the original basket is cracked, broken at the mounts or no longer holds items

• Unplug the appliance or disconnect power before starting any repair
• Empty the door bin and remove any clips or screws holding the old basket
• Align the replacement bin with the door tracks or mounting tabs and press or secure into place until it clicks
• Do not overload the bin; avoid forcing or bending mounting tabs during install

This door basket is a direct-fit replacement door bin that restores usable storage space on the appliance door and keeps bottles, jars and condiments secure. Durable molded plastic resists everyday wear and water exposure. What it does:

• Replaces a cracked, warped or missing door bin to restore door storage
• Holds bottles and jars upright to prevent spills and clutter
• Secures items behind the door seal so they don't shift when opened
• Matches factory fit and mounting points for reliable operation

• One door basket

• Remove food and items from the door before replacing the bin
• Most installs require only hand tools; handle plastic parts carefully to avoid cracking
• Align tabs and mounting slots, then snap or screw the bin into place per the appliance's factory method

This Door Basket is a replacement door-mounted storage basket that restores inside-door storage and helps keep items organized and accessible. It fits the original door mounting points to return usable shelf space. What it does:

• Provides a rigid storage shelf mounted to the appliance door for bottles, jars, and small containers
• Restores lost or damaged door storage to improve organization and access
• Replaces cracked, broken, or missing door basket that causes items to fall or shift
• Matches original mounting locations for a secure fit when installed correctly

• 1 door basket

• Remove power to the appliance and empty the door before starting work
• Align with existing door mounting clips or screws and secure using the original hardware
• Inspect surrounding door trim and seals for damage during installation

The Door Basket is an OEM part for LG refrigerators. It is designed to provide convenient storage space directly on the refrigerator door. This basket offers an accessible solution for smaller items like condiments, eggs, or other perishables.

Causes of a bad door basket include normal wear and tear, as well as accidental impact or damage.

Symptoms of a bad door basket include:

• The basket no longer securely attaching to the refrigerator door
• Sections of the basket cracking or breaking off over time
• Loosening or inability to stay firmly in place on the door

This OEM LG part is also compatible with some Kenmore models.

This replacement door basket is the removable shelf that mounts to the inside of a refrigerator door to hold bottles, condiments and small food items. Restores secure storage and organization on the door. What it does:

• Provides a stable shelf on the refrigerator door for bottles, jars and small containers
• Replaces a cracked, broken or missing door bin that can no longer hold items safely
• Helps maintain organized door storage and prevents items from shifting during use
• Matches original fit where designed for this exact OEM part number

• One (1) door basket

• Typically installs by sliding or snapping into the factory door mounting slots; no special tools usually required
• Remove all items from the door and support the basket while detaching the old one to avoid dropping
• Inspect mounting tabs on the door for damage and replace if worn or broken

STOPPER ASSEMBLY,DOOR

This bushing is a replacement shaft support that stabilizes a rotating assembly and helps reduce wear and noise. It restores smooth movement and helps maintain proper alignment for the appliance component. What it does

• Supports and centers a rotating shaft or drum to reduce wobble and rubbing
• Reduces noise and friction from worn pivot or support points
• Helps prevent uneven wear on mating parts and prolongs assembly life
• Commonly replaced when you hear squeaking, grinding, or notice excessive play

• One bushing

• Inspect mating surfaces and replace any damaged clips, seals, or fasteners as needed
• Use basic hand tools; hold the assembly steady and press the bushing squarely into place
• If the bushing is press-fit, use a suitable driver or press to avoid damage
• Disconnect power and follow all safety precautions before beginning repairs

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This handle assembly replaces a damaged or worn refrigerator door handle to restore a secure grip and normal door operation. Durable, finished replacement designed to match the factory mounting points and appearance. What it does:

• Provides a solid mounting point to open and close the refrigerator door smoothly.
• Replaces cracked, loose, or missing handles that make the door hard to grip or look worn.
• Helps restore proper door alignment and user control when the original handle is bent or broken.
• Preserves the original exterior appearance with a factory-style finish.

• One handle assembly

• Install requires basic hand tools; keep original screws and trim unless new fasteners are provided.
• Power to the appliance is not required for handle replacement; remove any magnetic items from the door before work.
• Align the handle to the factory holes and tighten fasteners securely but do not overtighten to avoid cracking the handle or trim.
• If trim or door finish is damaged, inspect surrounding components before final installation.

This is a refrigerator door handle assembly that restores a secure grip and reliable door opening. Designed to replace a cracked, loose, or broken handle so the door operates smoothly and safely. What it does:

• Replaces a damaged or loose door handle to restore proper grip and leverage
• Provides a stable attachment point for opening and closing the refrigerator door
• Helps eliminate wobbling, cracking, or separation at the handle area
• Matches OEM fit and mounting points for straightforward replacement when correct part is selected

• Inspect mounting hardware and door trim before installation; replace any damaged screws or clips
• Installation typically requires basic hand tools; follow the refrigerator's service manual for step-by-step guidance
• Work on a stable surface and avoid forcing components to prevent damage

This rail holder secures the sliding rail assembly so drawers or internal components move smoothly and stay aligned. It replaces a worn or broken holder to restore stable operation and reduce noisy or uneven movement. What it does

• Anchors the rail or track so drawer-like parts slide evenly
• Prevents rail wobble, binding, or misalignment during use
• Helps stop noisy or jerky movement caused by a damaged holder
• Commonly replaced when the rail detaches, cracks, or no longer secures properly

• Disconnect power and remove any obstructing panels before beginning work
• Replace with the matching OEM holder and reuse factory fasteners unless replacements are provided
• Minor disassembly of the surrounding trim or drawer may be required to access the rail
• Inspect the rail and rollers for wear

This connector assembly secures and drives the freezer drawer bar so the drawer opens and closes smoothly. Replaces a worn or broken bar/gear assembly to restore proper drawer movement and alignment. What it does:

• Transfers drawer motion to the slide mechanism so the freezer drawer glides correctly
• Replaces worn or stripped gears that cause slipping, grinding, or uneven movement
• Secures the drawer bar to the internal slide/track to prevent misalignment or sagging
• Useful when a drawer won't open/close smoothly, catches, or rattles during operation

• Disconnect power before servicing and remove stored items from the drawer
• Generally replaces with basic hand tools; support the drawer while detaching and installing the assembly
• Inspect surrounding slide components for wear and replace if needed for reliable operation

This connector assembly secures and drives the freezer drawer bar so the drawer opens and closes smoothly. Replaces a worn or broken bar/gear assembly to restore proper drawer movement and alignment. What it does:

• Transfers drawer motion to the slide mechanism so the freezer drawer glides correctly
• Replaces worn or stripped gears that cause slipping, grinding, or uneven movement
• Secures the drawer bar to the internal slide/track to prevent misalignment or sagging
• Useful when a drawer won't open/close smoothly, catches, or rattles during operation

• Disconnect power before servicing and remove stored items from the drawer
• Generally replaces with basic hand tools; support the drawer while detaching and installing the assembly
• Inspect surrounding slide components for wear and replace if needed for reliable operation

This cover assembly protects and secures an electrical connector, helping keep wiring aligned and shielded from moisture and debris. It restores a clean, stable connection to support reliable appliance electrical function. What it does:

• Shields an electrical connector from dirt, moisture and rubbing that can damage wires.
• Holds the connector in place to prevent loose or intermittent electrical connections.
• Helps reduce arcing and shorting risk by keeping contacts covered and aligned.
• Resolves symptoms such as intermittent power, component failure, or non-responsive controls when caused by a damaged or missing connector cover.

• One cover assembly (connector) as shown.

• Disconnect power to the appliance before inspecting or replacing electrical parts.
• Handle wiring and the connector gently to avoid bending contacts or breaking clips.
• Installation typically requires only basic tools; fit before final reassembly.
• If corrosion or wire damage is present, repair or replace affected wiring/connectors per OEM guidance.

This cover assembly protects and secures the control connector area to prevent damage and ensure reliable electrical connections. It restores the original housing around the connector for safe operation and proper fit. What it does

• Covers and protects the appliance's connector area from dirt, moisture, and accidental contact
• Helps keep wiring and plug ends correctly positioned to maintain a stable electrical connection
• Reduces risk of connector damage that can cause intermittent power or control issues
• Appropriate when the original connector housing is cracked, broken, or missing

• One cover assembly for the connector housing

• Designed to snap or screw into place; follow the appliance wiring diagram and connector alignment
• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Inspect surrounding wiring and clips; replace damaged wiring or fasteners as needed

This connector assembly secures and drives the freezer drawer bar so the drawer opens and closes smoothly. Replaces a worn or broken bar/gear assembly to restore proper drawer movement and alignment. What it does:

• Transfers drawer motion to the slide mechanism so the freezer drawer glides correctly
• Replaces worn or stripped gears that cause slipping, grinding, or uneven movement
• Secures the drawer bar to the internal slide/track to prevent misalignment or sagging
• Useful when a drawer won't open/close smoothly, catches, or rattles during operation

• Disconnect power before servicing and remove stored items from the drawer
• Generally replaces with basic hand tools; support the drawer while detaching and installing the assembly
• Inspect surrounding slide components for wear and replace if needed for reliable operation

This spanner is the specialized hand tool used to turn and hold slotted nuts, collars, or fittings on compatible appliances, making service and adjustments easier and safer. It gives a secure grip for loosening or tightening components without damaging surrounding parts. What it does:

• Fits and turns slotted or notched appliance fasteners and collars commonly used in assemblies
• Helps hold a component steady while you loosen or tighten the mating fastener
• Reduces slippage and tool marks compared with pliers or improvised tools
• Useful during maintenance tasks such as removing retaining rings, collars, or adjustable fittings

• One spanner tool

• Disconnect power and/or gas and follow all safety precautions before servicing appliances
• Use the correct size spanner engagement to avoid slipping or rounding the fastener
• Apply steady force; do not use cheater bars or excessive torque unless specified by the manufacturer

This center hinge assembly secures and guides the refrigerator doors, restoring correct door alignment and smooth opening. Replaces worn or damaged center hinge hardware to help stop sagging and improve door sealing. What it does:

• Provides the central pivot point between the refrigerator doors for proper alignment and operation
• Restores smooth, even door movement when original hinge is worn or bent
• Helps the doors close fully to maintain the appliance seal and consistent internal temperature
• Fits the factory mounting points and matches OEM form for direct replacement

• Basic removal of trim and temporary support of the doors is required; have a helper to steady doors during replacement
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power only if removing electrical components nearby; this part replacement is typically mechanical
• Inspect surrounding hinge screws and door hardware and replace if worn for best results

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

The Flapper Door Spring is an OEM part for LG refrigerators, designed for the ice dispenser's flapper door mechanism. This spring plays a role in ensuring the flapper door opens and closes properly, providing a tight seal when the ice dispenser is not in use.

Over time, the flapper door spring can lose tension or break due to fatigue or corrosion, leading to issues with the flapper door's operation.

Symptoms of a bad Flapper Door Spring include:

• The flapper door on the ice dispenser fails to close completely
• Ice or frost buildup around the dispenser area
• Difficulty dispensing ice
• Increased energy consumption as the refrigerator works harder to maintain its set temperature

This OEM LG part is also compatible with some Kenmore models.

This upper hinge assembly replaces the top door pivot on compatible refrigerators to restore proper door alignment and smooth opening. It helps keep the door level and seals evenly to prevent cold air loss and improve operation. What it does:

• Provides the pivot point that supports the top of the refrigerator/freezer door
• Restores proper door alignment when the door is sagging, rubbing, or not closing completely
• Reduces uneven gaps that can cause cold air leakage and frost buildup
• Works with the existing lower hinge and door components to re-establish smooth opening and closing

• One upper hinge assembly

• Disconnect power to the appliance before starting and remove food from the door area as needed
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use the correct hand tools and follow torque recommendations from the manufacturer; avoid overtightening

This upper hinge assembly supports the refrigerator door at the top, providing a smooth pivot and proper alignment. Replacing a worn hinge restores even gaps and a tight seal to help maintain consistent cooling performance.

• Supports the door's weight and provides the top pivot point
• Maintains alignment for correct gasket compression and a tight seal
• Helps the door open and close smoothly without rubbing or binding
• Common signs of wear: door sagging or misalignment, rubbing/clicking noises, and poor sealing or condensation around the gasket

• Unplug the refrigerator before servicing.
• Remove the top hinge cover; retain screws and any shims for reuse.
• Support the door with a helper while removing and installing the hinge.
• Position the new hinge, align the door, then tighten screws and verify smooth swing and full gasket contact all around.

Left side upper hinge.

The Dispenser Ice Chute Door is an OEM part for LG side-by-side refrigerators featuring exterior ice and water dispensers. This door guides ice from the storage bin to the access port.

Causes of failure can involve hinge wear reducing tight insulation seals, mineral buildup along tracks impeding smooth operation, or cracking down the center from repeated opening/closing cycles. 

Symptoms of a bad ice chute door include: 

• Difficulty dispensing crushed ice types or cubes  
• Leaks inside the fridge from failed door perimeter seals
• Door remaining partially open or unable to fully close
• Ice backup preventing dispensing when needed

Replace yours today with this genuine OEM LG door to maintain top-quality ice production and on-demand access. Ergonomic design glides open and closed reliably for maximum usability. This replacement part is also compatible with Samsung, GE, and Kenmore side-by-side refrigerators featuring externally mounted dispensers. Proper fit sustains premium performance.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This dispenser door link connects the dispenser actuator to the refrigerator dispenser door so the door opens and closes smoothly when dispensing. Replaces a worn or broken link to restore proper dispenser door movement. What it does:

• Transfers motion from the dispenser actuator to the dispenser door so the door opens when dispensing
• Keeps the dispenser door aligned for proper sealing and closure
• Can fail if the door won't open, sticks, or the dispenser lever feels loose or disconnected
• Compatible with dispenser assemblies that use a separate plastic/metal link between actuator and door

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser trim or front housing—keep fasteners organized
• Handle plastic components carefully to avoid cracking; inspect surrounding parts for wear

This holder bracket replaces a damaged or missing mounting support. It secures an internal component so it stays aligned and stable, helping your appliance operate smoothly without looseness or rattling.

• Provides a rigid mounting point to hold a component or assembly in place
• Maintains alignment to reduce vibration, rubbing, and intermittent operation
• Restores support when the original bracket is cracked, warped, or missing
• Common symptoms include a loose/wobbly part, rattling noises, or visible broken tabs

• Disconnect power to the appliance before servicing
• Note the original bracket's orientation and transfer any clips or screws from the old part
• Use existing hardware and tighten fasteners evenly—do not overtighten
• Verify proper fit and alignment before restoring power

The Ice Door Lever Spring is an OEM component compatible with LG refrigerators. It is part of the mechanism that opens and closes the ice door on LG French door refrigerators. Over time, springs can lose resiliency or become misaligned.

Causes may be extensive usage over years or damage like kinking that compromises spring function.

Symptoms of a bad ice door lever spring include:

• The ice door not latching fully when closed
• Difficulty opening or poor balance while moving the door
• The lever rubbing or catching instead of moving smoothly

This OEM LG part is also compatible with Sears/Kenmore side-by-side refrigerators.

This display power control board assembly powers and controls the appliance's user interface so lights, touchpads and status displays operate correctly. It replaces a failed display board to restore normal panel behavior and feedback. What it does

• Supplies power and signal control to the front display and indicator lights.
• Manages button/touch inputs and display output for the control console.
• Common symptom: display or control lights are dim, flicker, or not lighting.
• Common symptom: control panel is unresponsive, buttons do not register, or display shows no information.

• Disconnect power (unplug appliance or shut off breaker) before any service.
• Handle the board carefully and avoid static discharge; use anti-static precautions if available.
• Verify connector orientation and seating before reassembly; do not force connectors.

This button assembly replaces the set of push buttons on the appliance control panel to restore reliable input and a finished appearance. Replaces worn, broken, or unresponsive control buttons so the unit accepts user commands correctly. What it does:

• Provides the user-facing push buttons used to select cycles, options, and start/stop functions
• Restores physical button action for hard-to-press, stuck, or missing buttons
• Helps resolve intermittent or non-responsive control inputs caused by damaged button hardware
• Maintains the original fit and appearance of the control panel

• One button assembly

• Disconnect power before beginning any repair
• Access typically requires removing the control console or top panel—keep fasteners and clips organized
• Handle the assembly carefully to avoid damaging plastic tabs or button contacts
• Test button operation before fully reassembling the console

A decorative drain trim that restores the finished look around the drain opening and helps direct excess water into the drain channel. Replaces a worn or damaged trim piece to improve appearance and reduce water pooling at the drain area. What it does

• Covers and protects the drain opening while keeping the area looking finished.
• Guides water into the drain channel to help prevent minor pooling or splashing.
• Replaces cracked, bent, or cosmetically worn trim that can catch debris.
• Common symptom: visible damage or missing trim around the drain opening; water pooling or uneven appearance near the drain.

• One decorative drain trim piece.

• High-level, do-it-yourself friendly: typically secures by snap-fit or a few fasteners; follow model-specific service manual.
• Power off and disconnect appliance from power (and water if applicable) before beginning work.
• Inspect surrounding seals and mounting surfaces; replace any damaged parts to ensure a proper fit.

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

The Evaporator Assembly is an OEM component specifically designed for LG refrigerator systems utilizing rear evaporator coils. Located inside the fridge compartment, this assembly helps chill air for balanced and efficient cooling throughout storage areas.

Causes of a bad evaporator can include mineral or frost buildup on coil surfaces over time restricting heat exchange abilities, ruptured or leaking refrigerant lines affecting cooling cycle performance, or physical damage to fragile coil fins.

Symptoms of a bad evaporator assembly include: 

• Inability to lower temperatures into the recommended ranges  
• Cycling of compressor more frequently than normal operation
• Frost accumulating in the interior cabinet instead of on coils
• Mold or odors developing inside if temperatures fluctuate

This replacement assembly is compatible with Samsung, GE, and Frigidaire side-by-side refrigerator models.

This overload protector is a compressor safety device that helps stop compressor damage by interrupting power during electrical overload or overheating. It restores normal operation once conditions return to safe levels. What it does:

• Detects electrical overloads or excess heat at the compressor and temporarily cuts power to prevent motor damage
• Common symptom: compressor runs briefly then stops, or refrigerator cools intermittently
• Works with the compressor start system to protect against burnout and electrical faults
• Passive mechanical/electrical device—no user controls

• Disconnect power to the appliance before accessing the compressor or electrical components
• Handle terminals and mounting carefully to avoid bending or damaging connections

This PTC cover is the protective housing that shields a PTC sensor/assembly from debris and physical damage, helping maintain reliable sensor performance and prolong component life in the appliance. What it does:

• Protects the PTC sensor or PTC assembly from dust, impact, and accidental contact
• Helps prevent shorting or intermittent sensor signals caused by contaminants
• Supports proper positioning and mounting of the PTC component
• Can help address symptoms such as visible sensor damage, exposed wiring, or intermittent operation related to a compromised sensor housing

• Disconnect power to the appliance before starting any repair
• Remove the outer panel(s) as needed to access the PTC location; handle surrounding wiring and components carefully
• Replace only with the correct OEM cover to ensure proper fit and protection

The Thermistor Assembly is an OEM part for LG refrigerators. It serves a crucial function in monitoring and regulating the temperature within the appliance. By sensing temperature changes, the thermistor sends information to the refrigerator’s control board, ensuring the system adjusts cooling to maintain the desired temperature settings. 

Symptoms of a failing thermistor assembly include:

• Inconsistent temperatures in the refrigerator or freezer
• Refrigerator running longer than usual or not cooling efficiently
• Frequent fluctuations in temperature readings

Causes of thermistor assembly failure typically involve electrical faults, damage from moisture or frost, or simple wear over time, which can impact its ability to accurately measure and report temperatures.

This OEM LG part is also compatible with Sears/Kenmore.

This tray assembly collects and channels defrost and condensation water to the drain, helping prevent leaks and water buildup under the appliance. Designed to fit into the drain path and route moisture away safely. What it does:

• Catches defrost and condensation runoff and directs it toward the drain
• Helps prevent pooling and water damage inside the lower cabinet area
• Supports proper evaporator/drain operation by maintaining the drain path
• Can reduce dripping or puddling symptoms when the original tray is cracked or clogged

• 1 tray assembly

• Inspect surrounding seals and drain lines before installing; replace any damaged components
• Clean drain channel and remove debris to ensure proper flow prior to installation
• Handle gently to avoid cracking plastic tabs; use basic hand tools for removal/installation
• Disconnect power to the appliance before accessing internal components to avoid injury

Replacement front cover that restores your appliance's exterior finish and helps protect controls and internal components from everyday wear, spills, and minor impacts, delivering a clean, finished look and proper front-panel fit. What it does:

• Covers and protects the appliance's front area, helping shield controls and wiring from dirt and moisture.
• Restores damaged or cracked front trim for improved appearance.
• Helps maintain proper alignment and fit of the front assembly.
• Common symptom: cracked, chipped, warped, or loose front panel that exposes internal parts or looks worn.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Basic hand tools (screwdriver set) may be required to remove the old cover and install the replacement.
• Handle edges carefully to avoid cuts; align tabs/clips and secure fasteners snugly but do not overtighten.

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

This customized pin is a precision fastener that serves as a pivot or locating point within your appliance. It helps keep mating parts aligned and moving smoothly. Replace a bent, worn, or missing pin to restore proper operation. What it does

• Acts as a pivot/axle or locating pin between connected parts
• Maintains alignment to reduce wobble and uneven movement
• Supports smooth opening/closing or rotation at the joint
• Common signs it's needed: looseness, sagging or misalignment, scraping/squeaking at the pivot, or a visibly worn/bent/missing pin

• One customized pin

• Disconnect power (and shut off water supply, if applicable) before servicing
• Support the door/panel/assembly to remove load from the pin during removal/installation
• Note the orientation and order of any spacers, bushings, or washers and transfer them to the new pin
• Apply a light lubricant and verify smooth movement before restoring power

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

The Drier Assembly is an OEM part for LG refrigerators. This part is responsible for removing moisture and contaminants from the refrigerant. This ensures that the refrigerant circulates effectively and efficiently, preventing damage to other components and maintaining the refrigerator's cooling performance.

Causes of a bad Drier Assembly can include contamination from moisture entering the refrigerant lines, blockages from debris or particulates, and general wear and tear over time that reduces its effectiveness.

Symptoms of a bad Drier Assembly include:

• Reduced cooling efficiency or warm refrigerator temperatures
• Unusual noises from the refrigeration system
• The compressor running continuously or cycling frequently
• Frost buildup on the evaporator coils due to improper refrigerant flow

This OEM LG part is also compatible with Sears/Kenmore models.

This condenser assembly replaces the condenser wiring and support used in compatible refrigerators to restore proper condenser connections and airflow. It helps re-establish electrical routing and secure mounting so the cooling system can run reliably. What it does:

• Replaces damaged or corroded condenser wiring and associated mounting hardware
• Restores electrical connection between condenser components and the control circuitry
• Helps resolve symptoms such as cooling loss, intermittent compressor operation, or visible wiring damage
• Maintains proper condenser positioning for adequate airflow and heat dissipation

• Disconnect power and unplug the appliance before starting work
• Inspect surrounding components (fan, compressor, terminals) for related damage
• Use manufacturer-recommended torque and routing to avoid pinched wires

This fan grille assembly covers the interior compartment fan and helps direct airflow. Replacing a damaged grille restores safe, consistent air movement and protects the fan from contact with food items or debris. What it does:

• Shields the compartment fan to prevent accidental contact
• Guides airflow for more even cooling across shelves
• Helps keep packaging and loose items from striking the fan blades
• Replaces cracked, missing, or rattling fan cover components

• 1 fan grille assembly

• Disconnect power to the appliance before servicing
• Remove shelves/drawers as needed to access the fan cover area
• Remove screws or release tabs and pull the old grille straight out
• Seat the new assembly, reuse existing hardware, and verify the fan spins freely before restoring power

This fan grille assembly replaces the outer grill that covers and protects the appliance cooling fan, restoring airflow management and protecting internal components from debris. Designed for a direct fit where specified. What it does:

• Provides a protective cover for the cooling fan to prevent foreign objects from contacting the blades
• Helps direct airflow for proper cooling and ventilation
• Reduces noise caused by turbulent airflow around the fan area
• Can resolve issues like rattling sounds or reduced airflow caused by damaged or missing grille

• Disconnect power to the appliance before beginning any repairs
• Replacement typically requires removing a few fasteners; keep hardware for reinstallation
• Handle the grille carefully to avoid scratching or bending mounting tabs during installation
• After installation, restore power and verify fan operation and that the grille is secure

Door switch magnet for reed switch

The Evaporator Fan Motor is an OEM part for LG refrigerators. It powers the evaporator fan located inside the refrigerator's cooling system. The evaporator fan circulates chilled air through ducts and into food storage compartments, helping maintain an even temperature.

Causes of a bad evaporator fan motor include failure due to bearing wear, component fatigue from continuous operation, damage from debris accumulation over time inhibiting rotation, or failure of electronic components controlling motor function.

Symptoms of a faulty evaporator fan motor include:

• Temperature fluctuations in refrigerator and freezer sections
• Intermittent cooling or inability to cool fully
• Abnormal fan noise or abnormal vibration
• Frost or moisture buildup within refrigerator ducts

This LG part is also compatible with some Kenmore models.

The Dispenser Micro Switch is an OEM part for LG refrigerators. It is a component of the ice and water dispensing system, responsible for activating the dispenser when the lever is pressed. 

Causes of a bad Dispenser Micro Switch can include mechanical wear from frequent use, failure due to moisture or debris affecting the switch’s contacts, or electrical faults that prevent proper signaling.

Symptoms of a bad Dispenser Micro Switch include:

• The dispenser not releasing ice or water when the lever is pressed.
• Continuous dispensing or dripping after the lever is released.
• Intermittent or no response from the dispenser controls.

This OEM LG part is also compatible with Sears/Kenmore.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Motor Bracket secures the motor assembly, keeping it aligned and reducing vibration for reliable operation. Replacing a damaged bracket restores stable motor mounting and helps reduce noise and premature motor wear. What it does:

• Secures and supports the motor to maintain correct alignment and stable operation.
• Reduces motor vibration and operational noise when properly installed.
• A cracked, bent, or broken bracket can cause increased noise, vibration, or motor misalignment.
• Use when the existing bracket is bent, damaged, or failing to hold the motor securely.

• Disconnect power to the appliance before starting any repair.
• Access may require removing the cabinet or an access panel; keep track of fasteners.
• Installation typically requires basic hand tools; avoid forcing parts into position.

This damper motor support replaces a broken or warped mount for the refrigerator's air damper assembly. It holds the damper motor and door securely so the system can meter freezer air into the fresh food compartment.

• Secures and aligns the air damper motor/door within the duct
• Helps ensure proper opening/closing of the damper to regulate airflow and temperature
• Damage can contribute to a warm or too-cold refrigerator and inconsistent temperatures
• May cause clicking or buzzing from the damper area or a visibly loose assembly

• Disconnect power to the refrigerator before servicing
• Access the damper behind the fresh food compartment duct/cover; remove shelves as needed
• Note wiring and orientation; transfer the existing damper motor and door to the new support and reuse fasteners
• Ensure the door moves freely and seals before reassembly; restore power and verify airflow

This button holder secures a control panel push button in place so button presses register reliably and the panel stays finished. It restores proper button positioning and prevents the button from falling out or sticking. What it does:

• Holds a control panel push button in the correct position for reliable operation
• Keeps the button aligned so presses engage the switch or membrane consistently
• Prevents the button from popping out or becoming loose during normal use
• Helps maintain the appliance's finished appearance around the control area

• One button holder

• Turn power to the appliance off before attempting any service to avoid shock or injury
• Remove the control panel or bezel per the manufacturer's instructions to access the holder
• Inspect surrounding buttons and switches for wear; replace damaged components as needed

A replacement door supporter that secures and stabilizes the appliance door assembly to restore alignment and smooth operation. Ideal when a worn or damaged bracket causes door sag, misalignment, or rubbing. What it does:

• Provides structural support to the door assembly and keeps the door properly aligned.
• Helps prevent door sag and binding that can stop the door from closing fully.
• Reduces rubbing, scraping, or noisy operation caused by a damaged or bent bracket.
• Restores correct door travel and helps maintain an even seal when the door is closed.

• Disconnect power and remove/disconnect the door before replacing the bracket.
• Use appropriate hand tools to remove mounting screws; keep original hardware unless replacement is required.
• Test door alignment and operation after installation; tighten fasteners evenly to avoid binding.
• If hinge components or mounting points are damaged, replace those parts as well to ensure proper fit and function.

The Door Bracket is an OEM part for LG refrigerators. This bracket supports the refrigerator door by providing stability and ensuring proper alignment during opening and closing. It plays a crucial role in maintaining the door’s secure fit, which is essential for maintaining the internal temperature and efficiency of the appliance.

Common causes of a bad door bracket include wear and tear from frequent use, impact damage, or corrosion due to moisture.

Symptoms of a bad door bracket include:

• The refrigerator door not closing properly
• The door sagging or being misaligned
• Unusual noises when opening or closing the door
• Gaps in the door seal leading to temperature inconsistencies

This OEM LG part is also compatible with Sears/Kenmore.

This is a replacement mounting bracket that secures internal appliance components to the cabinet frame, restoring proper alignment and support for moving parts. It helps reduce vibration and prevents loose or sagging assemblies. What it does:

• Provides a stable mounting point for internal components to maintain correct positioning
• Helps stop rattling, knocking, or vibration caused by loose fittings
• Restores support for panels, assemblies, or mechanical linkages that rely on the bracket
• Useful when original bracket is bent, cracked, or otherwise damaged

• Follow manufacturer service manual for correct placement and fastener torque
• Use proper tools and retain all screws/fasteners; replace damaged fasteners as needed
• Disconnect power before accessing internal components to avoid shock or injury

The Heater Sheath is an OEM replacement part for LG refrigerators. This component is responsible for defrosting the evaporator coils, preventing frost buildup that can impair the refrigerator's cooling efficiency. The heater sheath ensures that the defrost cycle runs effectively, maintaining optimal performance and energy efficiency of the refrigerator.

Causes of a bad heater sheath can include electrical malfunctions, wear and tear over time, or damage to the heating element itself. These issues can result in the heater sheath failing to activate, leading to frost accumulation.

Symptoms of a bad Heater Sheath include:

• Frost or ice buildup on the evaporator coils
• The refrigerator or freezer section not cooling properly
• Longer defrost cycles or the refrigerator running continuously
• Water leaks inside the refrigerator from excess frost melting

This OEM LG part is also compatible with Sears/Kenmore models.

This LED backlight assembly restores screen illumination for compatible LG LCD/LED TVs, improving picture brightness and uniformity. Use it to replace damaged or failing backlight components and recover visible image lighting. What it does:

• Provides backlight illumination for the TV LCD panel so the picture is visible and evenly lit.
• Replaces damaged or non-functioning LED strips that cause dim screens or dark bands.
• Can address symptoms such as no backlight while image is still present, flickering or uneven brightness.
• Restores overall screen brightness and reduces backlight-related artifacts.

• Disconnect the TV from power and discharge capacitors before beginning any repair.
• Screen and internal components are fragile; handle the panel and LED strips carefully to avoid damage.
• Use ESD-safe precautions and follow manufacturer service instructions where available.

Keep your refrigerator interior bright and protected with this lamp cover — a clear/diffusing lens that shields the bulb while spreading light evenly for better visibility of stored food. What it does

• Protects the interior light bulb from contact, splashes, and accidental breakage
• Diffuses and softens the light for more even illumination inside the fridge
• Replaces cracked, yellowed, or missing lens that can cause glare or uneven lighting
• Fits the OEM mounting points for a secure, stable installation

• Disconnect power to the appliance before attempting any replacement
• Often removes by hand or with a fingertip push; have a screwdriver nearby if necessary
• Handle carefully to avoid scratching or cracking the lens during installation
• If glass fragments are present, clean out the area and wear gloves/eye protection

The Compressor Run Capacitor is an OEM part for LG refrigerators. It plays a critical role in the operation of the refrigerator's compressor by providing the necessary electrical boost to start and maintain the compressor's operation.

Causes of a bad compressor run capacitor can include electrical surges, overheating, or simply wear and tear over time. When the capacitor fails, it can no longer deliver the required electrical charge, which impacts the compressor's ability to start and run efficiently.

Symptoms of a bad compressor run capacitor include:

• The refrigerator not cooling properly
• The compressor not starting or running intermittently
• Unusual humming or clicking noises from the compressor area
• The refrigerator cycling on and off frequently

This OEM LG part is also compatible with Sears/Kenmore models.

Power cord assembly that restores the appliance's connection to household mains. Replaces a damaged or worn cord to help stop power loss, sparking, or intermittent operation and restore a safe power feed. What it does:

• Provides the main electrical connection from the wall outlet to the appliance so internal components receive line voltage.
• Replaces cords with visible damage, frayed insulation, exposed wires, or broken plug prongs.
• Can resolve symptoms such as no power, intermittent power, sparks at the plug, or breaker trips caused by a faulty cord.
• Restores the original style of power connection and strain-relief routing for a secure fit.

• Always disconnect power at the wall before attempting service.
• Basic hand tools may be required; secure the cord firmly with the appliance's strain relief and tighten screws.

The Capacitor is an OEM replacement part for  LG refrigerators. It is an electronic component located next to the refrigerator compressor that stores electric charge between cycles of the power supply circuit. The capacitor plays an important role in providing stable starting power to the compressor motor.

Causes of a bad capacitor next to the compressor can include heat distress over thousands of start/stop cycles of the refrigerator.

Symptoms of a bad capacitor include:

• The compressor makes loud buzzing or grinding noises during the operation
• The compressor fails to start or cycles on and off frequently
• Temperature fluctuations inside the refrigerator
• Error codes related to compressor issues

This genuine LG replacement is compatible also with Kenmore Elite model refrigerators

The MOTOR, DC is an OEM part for LG refrigerators. It is a direct current electric motor responsible for operating components related to cooling and airflow, such as the condenser fan and cooling fan. Efficient airflow circulation is critical for pulling heat away from refrigerated compartments and maintaining even temperatures throughout the fridge.

Causes of a bad motor can include excess dust buildup over time inhibiting proper fan rotation, worn motor brushes, or damaged motor windings affecting current flow. 

Symptoms of a bad direct current motor include:

• Abnormally warm refrigerator temperatures 
• Louder than usual operating sounds
• Lack of air coming from ventilation areas  
• Visible buildup of frost or condensation inside the fridge

Replace yours today with this genuine OEM LG part to restore optimal cooling performance. This OEM LG part is also compatible with Sears/Kenmore.

This PCB power control board assembly controls a major appliance's electronic functions and power distribution, restoring responsive controls and reliable operation when the original control board fails. What it does

• Manages power to motors, valves, and sensors and routes control signals to components.
• Replaces a failed or damaged control board that can cause no power, unresponsive controls, or intermittent operation.
• Helps resolve issues like no display, cycles not starting or stopping, and erratic function tied to control electronics.
• Matches the OEM board's connectors and mounting for direct replacement.

• One PCB power control board assembly as shown.

• Disconnect power at the breaker or unplug the appliance before starting.
• Take anti-static precautions and handle the board by edges to avoid ESD damage.
• Some disassembly (control panel or console removal) and connector unplugging required; keep screws and fasteners organized.
• Test functions after installation.

This lamp cover assembly protects and diffuses the interior light so the appliance illuminates evenly while shielding the bulb from spills and impact. It restores a finished look and helps keep the light working safely. What it does:

• Shields the interior light bulb from food, moisture, and accidental contact
• Diffuses light for more even illumination inside the compartment
• Prevents direct bulb exposure that can cause glare or damage
• Replaces cracked, yellowed, or missing lens that reduces light output

• Disconnect power to the appliance before servicing to avoid shock
• Handle the lens carefully to avoid scratches or cracking during install
• Typically secures with simple clips or screws; have a screwdriver handy
• Avoid touching the bulb with bare hands

This cover assembly protects and diffuses the interior lamp so the appliance is evenly lit while keeping the bulb shielded from food and debris. It restores proper lighting visibility inside the compartment. What it does:

• Protects the interior lamp from spills, impacts, and contaminants
• Diffuses light for more even illumination of the compartment
• Helps prevent direct contact with the bulb for safer operation
• Commonly replaces cracked, discolored, or missing lamp covers that reduce light output

• Disconnect power to the appliance before servicing to avoid shock
• Remove and replace the cover gently; avoid excessive force that can crack the lens
• Handle and dispose of any broken plastic safely; inspect the lamp/bulb for damage
• After installation, restore power and verify the lamp operates and the cover sits securely

The Ice Maker Assembly Kit is an OEM part for LG refrigerators. This kit includes all the necessary components to produce ice efficiently, ensuring your refrigerator maintains a steady supply of ice for your household. The kit also features a 20-pin and 3-pin wiring harness.

Causes of a bad ice maker assembly can include wear and tear over time, mineral buildup from hard water, or electrical malfunctions. Additionally, damage can occur due to improper handling or issues with other components in the ice-making system.

Symptoms of a bad ice maker assembly include:

• No ice production
• Slow ice production or smaller ice cubes
• Ice cubes that are misshapen or irregular
• Leaking water around the ice maker
•  Unusual noises during the ice-making process

This OEM LG part is also compatible with Sears/Kenmore.

This indoor fan motor powers the air conditioner's indoor unit blower to move air across the evaporator coil. Replacing a weak or failed motor restores proper airflow for effective cooling and comfort.

• Drives the indoor blower/crossflow fan to circulate conditioned air
• Maintains correct airflow across the evaporator for cooling and dehumidification
• Common symptoms of failure: no or weak airflow, fan won't start or stalls, intermittent operation
• May cause unusual buzzing/grinding noises or the unit shutting down with a fan-related fault

• Disconnect power at the breaker before servicing; allow moving parts to stop
• Remove the indoor unit cover and access panel; note wire harness connections and routing
• Transfer any brackets, insulators, or hardware from the old motor if required
• Ensure the fan wheel spins freely and does not rub before restoring power and testing

The Temperature Sensor is an OEM part for LG refrigerators. Also known as a thermistor, is responsible for sensing the temperature changes and providing the necessary feedback to the refrigerator's control board. It helps maintain accurate and consistent temperature levels, ensuring optimal food preservation and efficient cooling.

Causes of a faulty temperature sensor can include wear and tear over time, damage due to electrical issues or exposure to extreme temperatures, or sensor calibration issues. These factors can result in temperature inconsistencies, inaccurate readings, or improper cooling performance of the refrigerator.

Symptoms of a bad temperature sensor may include:

• Incorrect temperature readings on the control panel
• Temperature fluctuations inside the refrigerator
• Overcooling or inadequate cooling of food items

This OEM LG part can also be used on Kenmore/Sears appliances.