Range / Cooktop / Oven Switch

Genuine Ge part

Harness Switch

By: Ge

Part Number: WB21K10035

Do-It-Yourself Stories from Customers like You Igniters clicking while cook top off, needed new harness switch Peter G. • Corinth , TX • May 20, 2019

Removed knobs ,burners, grates,etc.. Removed glass top. Removed wire harness switch. Wrote down location and sequence of removals. Reassembled same, and tried burners. All worked fine with no clicking when turned off. Be careful with glass top removal, use a thin putty knife to separate top from gasket seal. Seal must be in place before re positioning top. Reassemble in same sequence as removal. Read more

Genuine Ge part

Infinite Ctl 2400

5.0 (1)

By: Ge

Part Number: WB23K5043

Do-It-Yourself Stories from Customers like You The stem on one control broke off David C. • Dexter , KY • January 24, 2016

I ordered the infinite control 2400 and replaced the defective part with it. This is a very easy repair. Read more

Genuine Ge part

Top Burner Valve Switch

By: Ge

Part Number: WB24K10002

This valve switch includes a orange hub and sparks at the 11 o'clock position. For the gray hub valve switch order WB24K10003.

Genuine Whirlpool part

Wire Harness (Main Assembly)

By: Whirlpool

Part Number: W10854963

This wire harness connects multiple electrical components to the appliance's control system, restoring reliable power and signal routing for proper operation. It replaces a damaged or worn harness to help fix intermittent power, non-working controls, or component failures. What it does:

Routes power and signals between the control board and internal components
Replaces frayed, broken, or heat-damaged wiring that can cause intermittent operation
Helps resolve symptoms like controls or lights not responding, error codes, or appliances failing to start
Maintains proper electrical connections to prevent arcing and short circuits

What's included:

One wire harness assembly as shown

Install notes:

Disconnect power and, if applicable, gas supply before starting work
Compare the replacement harness to the original to ensure connector types and lengths
Route wires away from heat sources and moving parts; secure with existing clips or ties

Genuine Ge part

Infinite Switch Control

5.0 (1)

By: Ge

Part Number: WB24T10028

Do-It-Yourself Stories from Customers like You Infinite control sparking Richard U. • Delmar , NY • November 21, 2014

The replacement was easy, BUT my Spectra model required removal of the front crystal. This wasn't hard, but I found nothing about it on the internet or YouTube. Remove the four plastic nuts and then the crystal. Then it's easy. Read more

Genuine Frigidaire part

Switch,Simmer Select,Push Butt

By: Frigidaire

Part Number: 5303935218

Genuine Whirlpool part

Wire Harness

By: Whirlpool

Part Number: W11246369

Genuine Ge part

Switch, Rocker

5.0 (1)

By: Ge

Part Number: WB24X415

Color: Black

Do-It-Yourself Stories from Customers like You Old worn parts Billy S. • Newport News , VA • February 26, 2016

Easy removal of worn parts and easy installation of new parts. Read more

Genuine Frigidaire part

Switch

4.7 (3)

By: Frigidaire

Part Number: 318903403

Do-It-Yourself Stories from Customers like You Erroneous remove rack indication Andrew F. • Ashland , MA • January 12, 2016

Replaced faulty rack switch. to do this I had to do the following: 1. Turn off power and gas. 2. Pull out range. 3. Removed a zillion screws on the left cover plate and heat shields. 4. Removed rack switch retaining screw inside oven. 5. Unplugged existing switch and confirmed bad (no continuity). 6. Installed new switch. 7. reverse order steps to complete. Read more

Genuine Ge part

Infinite Switch Top Burner Control Switch

5.0 (1)

By: Ge

Part Number: WB23M23

8" element switch

Do-It-Yourself Stories from Customers like You The GE infinite switch was bad and making front eye to turn red hot Ivery F. • Emporia , VA • January 19, 2019

Replaced the infinite switch on the front big eye Read more