Fde747rbt1 Frigidaire Dryer Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281153
The Rear Drum Bearing Kit is an OEM replacement part for Frigidaire dryers. It contains a set of parts responsible for supporting the rear end of the dryer drum, allowing it to rotate smoothly and efficiently during the drying cycle.
Symptoms of a faulty Rear Drum Bearing Kit include:
- Excessive noise or grinding sounds coming from the rear of the dryer
- Difficulty in rotating the drum or drum not turning at all
- Visible signs of wear or damage on the existing bearings
- Increased vibrations or shaking during the drying cycle
Causes of needing to replace the rear drum bearing kit can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or overloading.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models.
NOTE: The metal plate holes are not threaded. Use the self-tapping screws provided in the kit to thread the plate.
This part fixes the following symptoms
-
Noisy
-
No heat or not enough heat
-
Marks left on clothes
See more...
Do-It-Yourself Stories from Customers like You
After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016
I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing.
I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation.
I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years...
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 134120900
The Thermal Limiter is an OEM part for Frigidaire dryers. It acts as a safety feature, designed to prevent the dryer from overheating by shutting down the appliance when the internal temperature exceeds safe limits.
Symptoms of a failing Thermal Limiter include:
- The dryer failing to start or stopping abruptly during a cycle
- No heat being generated while the dryer is running
- The dryer overheating or feeling excessively hot
Common causes for a bad thermal limiter include restricted airflow due to a clogged lint filter or venting system, component failure from age or faulty manufacturing, and unusually high operating temperatures from overloading the dryer or mechanical failures elsewhere in the system. When a thermal limiter trips or fails, it must be replaced to restore functionality to the dryer.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Shuts off too soon
-
Too hot
-
Takes too long to dry
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Worn bearing and felt causing dryer drum to rattle and creek Bay S. • Bothell , WA • January 05, 2016
Recommendations have fun and a bucket to prevent losing parts. First watch the videos, practice disassemble and reassemble the dryer drum. Make certain you have a good screw driver and spatula from kitchen (could not find my putty knife). Secondly, clean and inspect everything, make sure the motor bearing and belt pulleys are in good condition with little or no play. Third after you have confidently disassembled, vacuum cleaned, inspected all the worn parts, grease the motor and pulley,...
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Frigidaire part
By: Frigidaire
Part Number: 131825900
The Dryer Drum Bearing is an OEM part for Frigidaire dryers. It supports the dryer drum, ensuring smooth rotation during the drying cycle. This part attaches to the inside of the rear panel of the cabinet, offering support to the dryer drum.
You should replace the drum bearing if it becomes worn out or damaged. Causes of a bad drum bearing can include normal wear and tear, overloading the dryer, or lack of lubrication.
Symptoms of a bad drum bearing include:
- Loud squeaking or grinding noises during operation
- The drum not turning smoothly or becoming misaligned
- Increased friction causing overheating or burning smells
- The dryer not tumbling clothes properly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Marks left on clothes
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible.
Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem.
Next step was to...
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 131475320
The Dryer Heater Assembly is an OEM part for Frigidaire dryers. It is responsible for generating the heat necessary to dry clothes during the drying cycle. This assembly includes a back plate, ceramic insulators, a 5/16 inch terminal heater element already attached, and a dryer safety thermostat.
Over time, the heater assembly can fail due to factors such as regular wear and tear, overheating, or electrical issues. A faulty heater assembly can result in the dryer not producing enough heat or not heating at all, significantly affecting the appliance's performance.
Symptoms of a bad dryer heater assembly include:
- Dryer not heating or taking too long to dry clothes
- Clothes coming out damp after a full drying cycle
- The dryer shutting off prematurely or not reaching the desired temperature
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible.
Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem.
Next step was to...
Read more
More
$78.95
- Compare At:
-
$108.95
- You Save:
-
$30.00
Genuine Frigidaire part
By: Frigidaire
Part Number: 131658800
The Door Catch is an OEM part for Frigidaire dryers. It secures the door closed during cycles. This allows the machine to safely run without the risk of the door opening, which could pause the drying process or pose a safety hazard. Constructed from durable materials, this door catch is designed to endure the frequent opening and closing of the dryer door, offering reliability and longevity.
Causes of a bad door catch include mechanical wear from regular use, accidental damage, or misalignment of the door.
Symptoms of a bad Door Catch include:
- The dryer door won't stay shut during cycles
- Difficulty closing the dryer door securely
- The need to apply extra force to close the door
- The dryer stops running due to the door opening mid-cycle
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$50.78
- Compare At:
-
$59.92
- You Save:
-
$9.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 134417000
The Dryer Seal is an OEM replacment part for Frigidaire dryers. It is located at the doorway opening where the drum rotates and helps prevent lint, moisture, and heat from escaping. The seal is a crucial component that ensures efficient drying and heat retention within the dryer drum.
Causes of a bad seal can include wear and tear over time from continuous use or damage due to mishandling. The nylon seal experiences a lot of friction and heat stress with each drying cycle.
Symptoms of a bad seal include:
- Increased drying time as heat escapes
- Excess lint and moisture accumulation inside dryer components
- Visibly worn or cracked seal edges
- Cool air leakage noticed around the door when the dryer is running
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Felt/nylon "bearing" felt glide assembly for dryer drum front end support had worn nearly completely away Harlan D. • Warrenville , IL • November 19, 2014
Get some acetone at a Hardware Store before you start. A pint will do. Unplug the dryer from 110 VAC. Pull the top off of the dryer, by lifting it from the front first. It is attached with snap metal fittings. Do not completely remove the top, just tip upright to gain access to the front interior of the dryer. Before you pull any wires from the door switch, record which color wires go to which terminals on the door switch. If you reassemble the connections incorrectly, the gas value will...
Read more
More
$15.95
- Compare At:
-
$39.50
- You Save:
-
$23.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102
The Door Strike is an OEM part for Frigidaire dryers. It is a small, essential component that ensures the dryer door remains securely closed during operation. The door strike engages with the door catch to keep the door latched, allowing the dryer to operate efficiently and safely. Without a functioning door strike, the dryer may not start, or it could stop mid-cycle.
You should replace this door strike if it becomes damaged or worn out. Over time, the door strike can suffer from wear due to regular use, misalignment, or accidental impact, leading to issues with the dryer door latching properly.
Symptoms of a bad door strike include:
- The dryer door not staying closed
- The dryer not starting or stopping unexpectedly
- Difficulty in latching the dryer door
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer door would not stay closed Carolina L. • Miami , FL • September 08, 2015
My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch.
I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to...
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 5300622034
The Electric Dryer Heating Element is an OEM replacement part for Frigidaire dryers. Located within the dryer drum cavity, this component produces the necessary hot air to evaporate moisture from wet laundry. Terminal Size: 5/16 inch. For the 1/4 inch terminal size order 5300622032. This electric dryer heating element restring coil does not include the heater housing insulators 131472100 or the terminal block 3202786.
Causes of element failure may be corrosion from atmospheric elements accumulating over time, cracks in filament coating from repetitive heating/cooling stresses, or exhaustion from workday after workday of extended use.
Symptoms of a bad electric dryer heating element include:
- Inability to achieve drying temperatures required for most fabric care
- Prolonged drying times reduce efficiency and convenience
- Absence of hot airflow from vents despite a running dryer
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dryer did not heat! Linda R. • La Jolla , CA • November 30, 2014
My appliance repair guy checked out the problem, but the stack washer dryer required the contractor to dismantle the cabinet to allow the repair to occur. So i wanted the parts available for the repair, so we would not have to have the dryer pulled apart in a small space for an extended time i ordered the parts on Friday afternoon and they arrived at my home before noon on Saturday! The contractor and the repairman were able to coordinate the repair on Tuesday morning, and though the...
Read more
More
$51.30
- Compare At:
-
$60.53
- You Save:
-
$9.23
Genuine Frigidaire part
By: Frigidaire
Part Number: 131724301
The Drum Bearing Bracket is an OEM replacement part for Frigidaire dryers. It holds and supports the drum bearing, which allows the dryer drum to spin smoothly during the tumbling and drying cycle.
Causes of failure can be cracking or breaking of the bracket over time due to constant use and stress. Improper installation that puts strain on the bracket may also lead to issues.
Symptoms of a bad drum bearing bracket include:
- Excessive vibration or shaking during operation
- Loud grinding or scraping noises
- The dryer drum not spinning properly or at all
- Premature wear of the drum bearing
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019
I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros.
Read more
More
$10.30
- Compare At:
-
$11.36
- You Save:
-
$1.06
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281019
The Ball is an OEM part for Frigidaire dryers. This part helps the drum to rotate smoothly and evenly. It provides a stable and low-friction contact point, allowing the drum to turn efficiently during drying cycles. This is a drum-bearing ball only. For a complete drum bearing and shaft kit order 5303281153.
Causes of a bad ball can include regular wear and tear, friction from continuous drum rotation, or physical damage.
Symptoms of a bad dryer ball include:
- Squeaking or grinding noises during operation
- The drum not rotating smoothly or becoming unbalanced
- Increased friction leading to higher energy consumption
- Visible wear or damage to the ball
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019
I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros.
Read more
More
$12.95
- Compare At:
-
$15.28
- You Save:
-
$2.33
Genuine Frigidaire part
By: Frigidaire
Part Number: 131168200
This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.
- Fastens components to frames, brackets, and covers
- Replaces missing, damaged, or rusted screws
- Helps reduce looseness, vibration, and rattling noises
- Restores proper alignment of panels and assemblies
What's included: One screw
- Disconnect power before servicing; shut off gas/water if applicable
- Start the screw by hand to avoid cross-threading; use the proper driver
- Tighten snugly—do not overtighten to prevent stripping metal or plastic
Do-It-Yourself Stories from Customers like You
Grill on air duct had an item melt on to it and partially block air flow Charles C. • Orchard Park , NY • November 25, 2017
It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube.
I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to...
Read more
More
$19.95
- Compare At:
-
$23.94
- You Save:
-
$3.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 131298300
This dryer thermostat monitors internal air temperature and opens/closes the heater circuit to keep drying safe and consistent. Replacing a weak or failed thermostat restores proper heat and helps prevent overheating or nuisance shutdowns. What it does:
- Senses exhaust/heater housing temperature and switches the heating circuit based on temperature
- Helps maintain target drying temperatures for consistent performance
- Provides over-temperature protection by opening the circuit if heat rises too high
- Common symptoms include no heat or weak heat, long dry times, heat cutting out mid-cycle, or the dryer running hotter than normal
What's included:
Install notes:
- Disconnect power before servicing; heating components can be live and hot
- Access location varies by model; typically mounted on the heater or blower housing behind a rear or front panel
- Transfer wires from the old thermostat to the new one one-at-a-time and secure firmly; ensure the mounting surface is clean and flat
- After replacement, check and clear the venting/duct for proper airflow to prevent repeat failures
Do-It-Yourself Stories from Customers like You
Rubbing blocks and felt that seal the front of the drum are worn drum is sagging and staining clothes with smears of rust Seth W. • Upper Arlington , OH • January 23, 2016
Replaced upper and lower felts. Painted rubbing surface on inside of drum with refrigerator enamel. Took out drum and lubed rear bearing. Replaced 2 of the 3 thermostats, and the belt just on principle.
Spent a lot of time with shop-vac removing lint from drier and exhaust ducts.
Runs great and is no longer cooking or staining clothes.
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Frigidaire part
By: Frigidaire
Part Number: 131719100
This dryer timer is the cycle control that advances your dryer through Timed and Auto Dry settings. Replacing a failed timer restores proper cycle progression, start/stop, and end-of-cycle shutoff.
- Advances the cam and internal contacts to move the dryer through heat, motor, and cool-down steps
- Governs run time on Timed Dry and Auto Dry cycles
- Routes power to the correct circuits in sequence; a failed timer may not advance or may stop early
- Common symptoms include timer knob not moving, dryer running indefinitely, or not starting on certain settings
What's included: 1 dryer timer assembly Install notes:
- Disconnect power; for gas models, also shut off gas
- Remove knob/dial, open the console, and unmount the timer
- Label or photograph wiring; transfer wires one at a time to the new timer
- Reassemble and test both a Timed Dry and an Auto Dry cycle
This part fixes the following symptoms
-
Doesn't shut off
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
Dryer timer would not turn and knob broke from the strain Bruce B. • Birmingham , AL • October 17, 2014
I ordered the timer and knob on Monday, they arrived around noon on Tuesday, and within an hour I had them installed and back in business. I was amazed how quickly the parts got here. The online video showing the procedure step by step was very helpful. Instead of disconnecting all the wires and having to keep up with which one went where, I moved each wire one by one and made sure I didn't get any of them in the wrong place. The only thing that slowed me down a bit was seeing which side of the...
Read more
More
$180.52
- Compare At:
-
$216.62
- You Save:
-
$36.10
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281020
For a complete drum bearing and shaft kit order 5303281153.
Do-It-Yourself Stories from Customers like You
Dryer drum would not turn J Kent I. • Anderson , IN • February 22, 2019
I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros.
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 131205400
A replacement bracket screw used to fasten internal brackets and panels to the appliance frame, restoring secure mounting and reducing rattling or misalignment caused by stripped, corroded, or missing fasteners. What it does
- Secures mounting brackets, panels or trim to the appliance chassis.
- Restores proper alignment and prevents movement or vibration-related noise.
- Use when the original screw is stripped, rusted, broken, or missing.
- Square-drive head provides a reliable engagement for positive tightening.
What's included One bracket screw. Install notes
- Disconnect power to the appliance before servicing to avoid electrical hazard.
- Use the correct square (Robertson) driver to avoid cam-out and head damage.
- Tighten until snug; avoid over-tightening which can strip threads or crack panels.
- If threads are damaged, replace with the matching screw size and type or repair threads before reuse.
More
$10.32
- Compare At:
-
$11.46
- You Save:
-
$1.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204254
This heater baffle mounts near the heating element to deflect and distribute radiant heat. It helps protect nearby surfaces and wiring while promoting more even temperatures and reliable performance inside the appliance.
- Directs and diffuses heat from the element to reduce hot spots
- Acts as a heat shield to protect the liner and adjacent components from direct radiant heat
- Helps maintain proper clearance and airflow around the element
- Damage or a missing baffle can lead to uneven temperatures, localized discoloration/scorching, or a burning smell
What's included: 1 heater baffle Install notes:
- Disconnect power at the breaker or unplug the appliance; allow it to cool completely
- Access the heater area; remove the screws or clips securing the existing baffle and retain the hardware
- Position the new baffle in the same orientation; ensure it does not contact the heating element
- Restore power and test operation
Do-It-Yourself Stories from Customers like You
Dryer was not heating. Judith W. • Hemet , CA • December 31, 2023
Our dryer stopped heating. My husband changed out the entire heating element and replaced the baffle heater since it had warped. He put it back together and it is working beautifully. The videos provided by the website to help fix the problem are outstanding.
Read more
More
$92.95
- Compare At:
-
$110.61
- You Save:
-
$17.66