Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement pantry drawer cover slide for refrigerators. Installs on pantry compartment to secure cover panel. Replace if cracked, broken, or pins damaged.
I ordered 3 replacement shelves for my fridge. Promptly received the shipment, but one of the items was damaged (the lid for the butter try shelf). I went online and started a chat with the rep from APP, and they were great. Gave them my information and told them the issue. Replacement part sent out on Monday! Great service. Read more
Replaces cracked or clogged drain cap assembly in refrigerator compartment. Installs behind rear wall to prevent water buildup under crisper drawer.
Found one of the drain valves was clogged causing condensation to overflow on the floor behind the refrigerator. Order the parts on Monday morning and they arrived tuesday afternoon. Replace both of the valves in 15 minutes. Easy repair and save a bundle over a service call. Read more
Fix loud fan noise or refrigerator not cooling from ice buildup. This evaporator cover assembly includes motor, fan blade, and foam insulation.
Replaced the evaporator cover asy.. Read more
Fix water pooling under crisper drawers or ice buildup on coils. This bracket secures the defrost heater to prevent drain freezing. DIY repair in 5 minutes.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Refrigerator compressor won't start after power surge? This overload protector prevents electrical damage to your compressor. DIY repair in 30 minutes.
Took a bit to diagnose. First tried cleaning coils but the problem still persisted. Next took of the back panel and put the system into diag mode. (Press energy save button and fridge button for eight seconds system ding once a second and inverter board red LED will blink a code or be on solid if no issue. See back of the refrigerator for a sticker with what the number of blinks means. My unit one blinking 1 time. So I measured the resistance of the compressor between windings (8.9 ohms between... Read more
Fix warm fridge temps and ice buildup with this evaporator fan motor. Common when fan makes grinding noise or stops running. DIY repair in 2-3 hours.
I took all the items out of the refrigerator. Removed the screws that hold the cover over the evaporator motor. Than for three hours used a hair drier to remove ice. The panel was frozen on if you pull on it it will break. Soaked up all the water removed the panel and took the fan blade off. That was difficult because it looks like a regular screw head however, you need to push in that which will cause it to release the blades and than push it onto the new motor. Than replace the panel put the... Read more
Replace your cracked, broken, or missing freezer drawer handle. This plastic handle installs on the pull-out freezer drawer for easy opening and closing.
Using the website, I was able to locate the part and order it Read more
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed. Read more
Ice maker not working or door not closing properly? This refrigerator door interlock switch detects door position to control ice production. DIY-friendly fix.
Replacement rear caster wheel for refrigerators. Restores mobility when original wheel is broken, cracked, or damaged. Mounts to bottom rear of unit.
I have a large Samsung 4 door refrigerator. One of the rear wheels broke. To replace it, you need the wheel and the shaft. To lift the refrigerator for the repair, I had my wife stand in front of it with her foot on a board that was wedged against the front wheels. I then pushed the refrigerator up from behind and slid a 3/4" piece of plywood underneath the bottom with my foot. This gives you enough space to do the repair. After removing the back cover, it's best just to knock out the broken... Read more
Replacement cap for French door refrigerator center hinge assembly. Covers hinge mechanism on door frame. Needed when original is cracked or broken.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
Plastic grommet that cushions the hinge pin on refrigerator doors. Replace if cracked, worn, missing, or causing door alignment issues.
I removed the door and the hinge assembly from the right side; it turns out the grommet had never been installed and this is what was causing the door to grind down the metal hinge. It was remarkably easy to replace and my door is working perfectly! Read more
Connects your refrigerator to the wall outlet. Replace if the cord is severed, the plug prongs are broken, or the ground terminal is damaged or missing.
I started by replacing the water filter assembly since it was leaking after I attempted to install a non-name-brand filter. The new assembly didn't fix the problem (but was hard to find, and AppliancePartsPros was amazing in being able to get one). Further, while replacing that I noticed that the previous owner had literally cut out the grounding pin from the power cord. I decided to replace the power cord and the Ice Maker Assembly. None of the online stores seemed to have either part listed... Read more
Replacement axle pin that secures roller wheels to the refrigerator base. Needed when original pin is damaged, corroded, or broken during wheel replacement.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Houses and secures your water filter for clean drinking water and ice. Replace if cracked, leaking, or causing slow flow. Confirm fit with your model number.
New filters did not fix issue and lines were clear. No need to pull fridge out, Changing this part fixed completely and took about an hour. Mostly because I did not find a good step by step to follow. FIRST: Shut off water, but leave power on for inside fridge lighting. 1. Remove two crisper drawers 2. Squeeze two white tabs just under glass shelf in middle filter housing while pulling off front filter cover (has big hole for filter in middle of it). This requires slotted screwdriver to LIGHTLY... Read more
Refrigerator not cooling or making noise from the back? The evaporator fan motor circulates cold air. DIY-friendly repair with video guide available.
Replaced refrigerator evaporator compartment fan. Read more