Refrigerator Gasket & Seal

A replacement damper gasket that seals the refrigerator air/damper assembly to help maintain proper airflow and temperature control inside the fresh-food compartment. Restores the damper seal to reduce drafts and energy loss. What it does:

• Creates an airtight seal around the air damper to keep conditioned air inside the compartment
• Helps the damper regulate airflow for more consistent temperatures
• Can reduce frost buildup and limit warm-air leaks that cause the compressor to run more
• Common symptom: uneven temperatures or a draft near the damper area

• One damper gasket

• Disconnect power to the appliance before beginning any service
• Remove the damper housing or inner liner trim as needed to access the gasket; handle plastic parts gently to avoid cracking
• Seat the gasket fully in the damper groove and reassemble components in reverse order

This refrigerator pan/vegetable frame gasket seals the crisper area to help maintain proper humidity and keep produce fresher. It replaces a torn, loose, or hardened gasket to restore the drawer seal. What it does:

• Seals the crisper/pan opening to help retain humidity for stored fruits and vegetables
• Helps prevent cold air loss and reduces temperature fluctuation in the drawer area
• Commonly replaced when the gasket is cracked, warped, flattened, or detached
• Fits around the vegetable/crisper pan frame to restore an effective seal

• Disconnect power or unplug the appliance before starting work
• Remove crisper drawer/pan to access the gasket area
• Press the gasket into the channel around the pan/frame; avoid overstretching
• Do not use sharp tools that could nick the gasket or surrounding trim

The lower gasket shield is a guide that protects the refrigerator door gasket at the bottom edge, helping the door close smoothly and maintain an even, reliable seal to keep temperatures stable and moisture down. What it does:

• Protects the lower edge of the door gasket from wear and deformation
• Guides the gasket into place for a snug, even seal
• Helps reduce warm-air leaks that can cause condensation or frost
• Replaces cracked, missing, or warped shields that can lead to poor sealing

• Includes 1 lower gasket shield

• Disconnect power and open the door for safe access
• Remove any lower door bins if needed
• Gently pull back the gasket at the lower edge to expose the shield and fasteners
• Install the new shield, reseat the gasket fully, and verify the seal with a paper-slip test

A replacement door gasket assembly that seals the refrigerator door to help maintain internal temperature and reduce energy loss. Restores a proper door seal to help keep food fresher and reduce cooling strain. What it does:

• Forms a tight seal around the refrigerator door to minimize cold-air loss and help maintain set temperatures.
• Helps prevent frost buildup and condensation inside the fresh-food compartment when the seal is compromised.
• Can reduce cycling frequency and excessive run time caused by a damaged or worn door seal.
• Common symptoms of a failing gasket: visible gaps, cold spots, frost or ice buildup, or condensation on the door edges.

• Disconnect power to the appliance before starting any repair.
• Remove food and door-mounted items as needed for safe access and handling.
• Align the gasket into the door channel, working it evenly around the perimeter so it seats fully; some distortion may correct after a short run time.

This QC seal damper is the refrigerator air damper that helps control and seal airflow between compartments to keep temperatures stable and reduce energy loss. Replacing a worn damper restores proper airflow regulation. What it does:

• Regulates cold air flow from the freezer to the fresh-food section to help maintain set temperatures.
• Seals the transfer opening to prevent unwanted air exchange and reduce temperature swings.
• A faulty or stuck damper can cause uneven temperatures, excessive frost/ice, or poor cooling in the refrigerator compartment.
• Dampers can produce rattling or buzzing noises when damaged or obstructed.

• Always disconnect power to the appliance before servicing.
• Access may require removing interior shelves, drawers, or a panel; handle inner liners and gaskets carefully.
• Inspect surrounding seals and mounting points; ensure the damper is oriented correctly and moves freely before reassembling.
• After installation, restore power and verify proper operation and temperature stabilization.

This door gasket assembly seals the refrigerator door to the cabinet, keeping cold air in and humid room air out. Replace a torn or deformed gasket to restore a tight seal, stable temperatures, and reduce frost or condensation.

• Creates an airtight seal around the door perimeter
• Helps maintain proper temperatures and consistent cooling
• Reduces warm-air leaks that lead to frost or condensation
• Common symptoms: torn/warped gasket, visible gaps, door not closing flush, or temperature swings

• Disconnect power before servicing
• Let the new gasket warm to room temperature; use warm water or gentle low heat to relax folds—do not overheat
• Remove the old gasket and press the new gasket fully into the door channel, ensuring corners seat properly
• Close the door and check contact all around; work the gasket as needed until it seals evenly

This door gasket seals the refrigerator/freezer door to help maintain proper temperature and reduce energy loss. A direct-fit replacement that restores the magnetic seal for better cooling performance. What it does:

• Re-establishes a tight seal around the door to keep cold air in and warm air out
• Helps reduce frost buildup and moisture inside the compartment
• Improves cooling efficiency and may reduce excessive run time from a failing seal
• Stops drafts and prevents food spoilage caused by a poor door seal

• One door gasket

• Clean the door frame and remove old gasket before installing the new one
• Warm or flex the gasket as needed for easier positioning; ensure the magnetic seal seats evenly around the perimeter
• Check hinge alignment and door closing after installation to confirm a complete seal
• Follow appliance power-off and safety precautions; refer to the appliance manual for model-specific instructions

This rear gasket cover secures the refrigerator door gasket and helps maintain a clean seal at the back edge of the door. It restores proper gasket alignment and helps reduce air leaks and moisture buildup. What it does:

• Holds the rear edge of the door gasket in place for a consistent seal.
• Helps prevent cold air loss and condensation by keeping the gasket aligned.
• Reduces rubbing and wear on the gasket edge caused by movement.
• Commonly replaced when the cover is cracked, missing, or allows the gasket to pull loose.

• One rear gasket cover.

• Remove power to the appliance before beginning any work.
• Typically installs by snapping or sliding into the door gasket channel; inspect surrounding trim for damage.
• Use basic hand tools; avoid forcing the cover to prevent breaking the part or the door.
• If gasket damage is present, replace the gasket as needed to ensure a proper seal.

This is the rear crisper seal that fits along the back edge of the refrigerator crisper compartment to help maintain the crisper enclosure and reduce air leakage. It restores a tighter seal for better humidity control and food storage. What it does:

• Replaces a worn or torn rear crisper gasket to help reduce cold air loss from the crisper area
• Helps maintain crisper humidity so produce stays fresher longer
• Prevents gaps that can cause uneven cooling or frost build-up near the drawer
• Can reduce draft noise or rubbing caused by a damaged seal

• One rear crisper seal (matches OEM part number)

• Remove the crisper drawer to access the rear seal before replacing
• Peel out the old seal and press the new seal firmly into the gasket channel; ensure an even, continuous fit
• Avoid using sharp tools that could damage the cabinet or new seal
• Unplug the refrigerator or switch off power if needed for safe access to nearby components

This front-chill seal is the replacement gasket that seals the refrigerator's front chill/drawer area to help maintain proper temperature and reduce moisture intrusion. Restores a tighter seal to improve cooling performance in the drawer area. What it does

• Replaces worn, torn or compressed front chill/drawer gasket that lets cold air escape
• Helps maintain even temperature in the chill/deli drawer and reduce frost buildup
• Reduces moisture and odor transfer between compartments caused by a failing seal
• Common symptom: drawer not staying cold or visible gaps around the drawer edge

• Designed for a direct-fit replacement; remove the drawer or access panel as needed to reach the gasket
• Clean the mounting flange and channel before installing the new seal for best adhesion/seating
• Seat the gasket evenly into the channel; use gentle, even pressure to avoid distortion
• Disconnect power before removing panels or working near refrigeration components

This door gasket seals the refrigerator door to help maintain proper temperature and reduce energy loss. It replaces a worn, torn, or compressed seal to improve cooling performance and food safety. What it does:

• Creates an airtight seal between the door and cabinet to keep cold air in and warm air out
• Helps prevent frost build-up and reduces moisture inside the compartment
• Can stop visible gaps that allow warm air and odors to enter
• Restores consistent temperatures for better food preservation

• One refrigerator door gasket

• Handle gently to avoid stretching or tearing; follow the appliance manufacturer's alignment and fastening steps
• Clean the door flange and gasket channel before installation for a proper seal
• Some gaskets require heating (hair dryer) or a short break-in period to fully seat; follow your model's instructions

This replacement door gasket seals the refrigerator compartment to keep cold air in and warm air out, helping maintain consistent temperatures and reduce energy use. It fits along the cabinet opening and forms the primary seal between door and cabinet. What it does:

• Creates an airtight seal to help maintain internal cooling and reduce compressor runtime
• Prevents warm, moist air from entering and causing frost build-up or condensation
• Helps keep food fresher by maintaining stable temperatures
• Common symptom: visible cracks, gaps, or torn edges around the door perimeter
• Common symptom: warm spots inside the fridge, excessive frost, or higher energy use

• Unplug or disconnect power to the appliance before starting any repair
• Remove the old gasket and clean the sealing surface thoroughly before installing the new gasket
• Some installations require basic hand tools; check the appliance's service guide for detailed steps
• If adhesive or clips are used, follow OEM instructions

This mullion duct gasket seals the vertical door/mullion area to help keep cold air inside the refrigerator and reduce condensation. It replaces a worn or damaged gasket to improve seal performance and reduce moisture buildup. What it does:

• Seals the mullion/duct area between doors to help maintain proper temperature and reduce warm air infiltration
• Helps prevent condensation and frost build-up along the door mullion
• Restores the door seal where gaps or deterioration allow air leaks
• Works with original mullion/duct trim to maintain proper airflow paths

• 1 mullion duct gasket

• Designed to fit into the mullion/duct channel; remove old gasket and press new gasket into place
• Handle gently to avoid stretching or tearing the gasket during installation
• Clean the mounting channel before installing to ensure a full contact seal
• Disconnect power or follow appliance safety guidelines before servicing doors/mullion area

This side gasket seals the chill compartment, helping maintain proper temperature and reduce frost and moisture buildup for consistent food storage. It replaces worn or torn side seals to restore the compartment's closing surface. What it does:

• Replaces damaged or hardened side seal material to improve the compartment's seal.
• Helps reduce air leaks that can cause temperature fluctuations or excess frost.
• Supports efficient cooling by maintaining a tighter seal around the chill area.
• Can resolve symptoms like cold loss in the chill compartment, visible gaps, or condensation/frost near the seal.

• High-level swap: remove the old seal, clean the mounting surface, and press the new seal into the channel until fully seated.
• Use mild soap and water to clean surfaces; avoid harsh solvents that can damage plastic.
• If adhesive or fasteners are present, retain or replace them per the model's instructions.
• Disconnect power only if required by your model's service instructions; follow all safety guidance.