Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Service Machine Control is an OEM component specifically designed for GE dishwashers. As the main control board, it regulates all wash cycles including temperature, filtration, spray arm rotation, drying functions and end of cycle signals. Causes of a faulty service machine control include normal wear and tear over time. Electronic failures or water exposure from plumbing issues can also trigger malfunctions. Symptoms of a failing control board are:
Replacing it with this genuine GE OEM part restores optimal cycle handling. Proper controls are essential for sanitizing every wash. The part is also compatible with Hotpoint, RCA and some Kenmore models.
Indicator light would blink three times, make a sound, but the dishwasher would not run. After making sure there were no obstructions, no problems with seals, filters, and latch clean, I cut the power off and back on. The Dishwasher worked for a few more times. After that, cutting the power off and on no longer worked. I figured out what buttons to press and hold to find the error code (start/stop and cycle select), saw code 815, and then did a "hard reset" by pressing and holding other... Read more
Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This latch assembly secures the door and activates switches. 5-10 min fix.
After I double checked that the unit did have power to it, I concluded it was probably a switch or the User Interface Board. I found the parts on the AppliancePartsPros for the best price and delivery. After the parts were delivered two days later, it took me a couple hours to disassemble and re-assemble the door for the dishwasher and luckily everything seems to be working fine three days and three loads later. The only issue I had was with the User Interface board..... this is a generic... Read more
The Lower Rack is an OEM replacement part for GE dishwashers. The lower rack is where you place dishes, pots, and pans for cleaning during the wash cycle.
Symptoms that may indicate the need for this replacement kit include:
Causes of needing to replace the lower rack can include normal wear and tear over time, exposure to high heat or harsh detergents, or physical damage from mishandling or impact.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models,
Note: If your original silverware basket was mounted on the front of your original rack, the new rack does not support that mounting. The silverware basket must be placed inside the new rack.
We ordered a replacement Lower Dishrack KIt which arrived in a very timely manner. I was surprised to see the order included a utensil rack as ours was fine and we had not ordered one. After installing the dishrack, we discovered the old rack was obsolete. It was so nice to realize GE was on top of things in sending the replacement utensil rack instead of me having to order one after the fact. Read more
Dishes not drying or staying wet after cycle? This heating element heats water during wash and dries dishes after rinse. DIY-friendly replacement part.
I followed the directions on several websites for repairs. The obvious place to start is the heating coil and thermostat. I checked the continuity of the coil and it was good with a reading of almost zero resistance. Next I read that there is no thermostat controls on my GE dishwasher so I followed another webpage that said the Sensor Turbidity Assembly acts like a thermostat so I replaced that. Wasted effort as that switch sensor was OK. Normally it has a light on when it is working, a... Read more
Fix a dishwasher that won't fill with water by replacing the flood switch assembly. This 5-minute DIY repair detects water levels to prevent flooding.
Removed the lower rack, removed the lower wash arm, removed the lower coarse filter, removed fine filter ( still no tools require to this point). Removed two 1/4" head screws with nut driver to then remove float switch, unplugged float switch, plugged in new switch, reinstalled filter, etc. This is a 5 minut job! Read more
The Single Speed Dishwasher Drain Pump Kit is an OEM replacement part for GE dishwashers. This important part works to drain water from the dishwasher at the end of each cycle. The pump ensures water is fully drained from the tub and pipes to prevent damage. Causes of a bad drain pump can include normal wear and tear over extended use, blockages in the drain system, or failures in the electric motor. Symptoms of a bad drain pump include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I viewed youtube videos and followed the instructions on how to determine the cause of the problem. I cleared the lines and poked my fingers in to check for obstructions. But in the end, the drain pump was the problem. The pump came in the mail the next day. The job required the pump and only one of the hose clamps as the original setup has one single ear clamp which can be removed with wire cutters and a standard one which I re-used. There is a wire adapter in the kit that is necessary to... Read more
Replaces broken or worn lower rack carriers and rollers. Installs on both sides of the dishwasher lower rack to restore smooth gliding along tracks.
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix! Read more
Seals the dishwasher tub opening to prevent water leaks during wash cycles. Replace if worn, flattened, or causing leaks. Verify fit with your model.
Upon taking the door apart it looked like the leak was coming from the vent so I replaced the vent cap, vent seal and the transition piece. I did not have to change the seals. It took me a while to figure out how to get the door apart, but once I did, it was fairly straightforward. Read more
The User Interface Control Board is an OEM part for GE dishwashers. It serves as the main control panel, allowing users to select and monitor various wash cycles and settings. This control board interfaces with the dishwasher's electronic system to ensure proper operation.
Causes of a bad control board can include electrical issues, exposure to moisture, or general wear and tear over time. Damage to the circuitry or components can also impair its functionality.
Symptoms of a bad user interface control board include:
The control went thru a month or so of erratic behavior; the display would come on and flash and beep without any input on my part. Then it died completely. I did a little research on the GE website and determined likely cause waa a defective user interface board. I found AppliancePartsPros.com and contacted their tech support, who directed me to check the output of the control board across 2 pins for 13.5v DC. I did this, and measured 13.8v, so control board was good. When I reconnected the... Read more
The Diverter Valve Assembly is an OEM part for GE dishwashers. This component controls the flow of water to different parts of the dishwasher, ensuring that the water is directed to the appropriate spray arms for effective cleaning.
You should replace this diverter valve assembly if it becomes faulty or malfunctions. Common causes of a bad diverter valve include wear and tear over time, clogging from debris or hard water deposits, or failure of internal components due to electrical issues.
Symptoms of a bad diverter valve assembly include:
Needed to replace diverter valve. Since you can't get service now due to covid restrictions. We needed to order direct. The service was exceptionally great. Received tracking number right away. Since I ordered overnight delivery, the part came early next day and we are up and running! Read more
The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.
Symptoms of needing to replace the lower rack roller include:
Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Replacement silverware basket for dishwashers. Holds utensils and flatware securely during wash cycles. Needed when original basket is cracked or broken.
Our GE was installed about 8 years ago and was AWESOME for much of its early life. However, progressively its cleaning ability diminished. By replacing all the spray arms (clogged with debris), filters, drain hose, and sump...this dishwasher cleans like it did when it was new! Cost was around $100 (also replaced a wheel and the silverware basket) and labor was relatively simple. And to think...my mother-in-law said, "Wouldn't it just be easier to buy a new one?!?". Read more
The Drain Pump Kit is an OEM part for GE dishwashers. It is designed to efficiently remove wastewater from the dishwasher after each wash cycle, ensuring that the appliance drains properly.
You should replace this drain pump kit if it becomes damaged or fails to operate correctly. Common causes of a bad drain pump include blockages from debris or food particles, electrical malfunctions, or wear and tear from regular use.
Symptoms of a bad drain pump include:
Removed two securing screws from side of dishwasher. Pulled out of cabinet careful to not over extend supply/drain/electric connections. Layed unit on side, removed two clamps from each end of drain pump as well as one electrical connection, removed bad pump, replaced connections and clamps, electrical connection. Ran a cycle while out of cabinet to ensure no leaks, replaced unit and screwed back into cabinet. Whole thing took 20 minutes. Read more
Dishwasher not filling with water or filling too slowly? The water inlet valve controls water flow into the tub. DIY-friendly repair with video guide.
I figured it was the valve, but searching on the Appliance Parts site, somebody said they fixed it by replacing the switch flood assembly. So I order both parts. The Switch Flood Assembly was easiest to replace, so I decided to try that first. When I pulled out the old assembly, I noticed it did not 'rattle', as the new one did. So, there is apparently a float ball that had gotten stuck. I put the new one in and poof.. it worked. The only update to the instructions is a reminder that the... Read more
The Circulation Pump is an OEM part for GE dishwashers. It is responsible for circulating water throughout the dishwasher. It pumps water from the bottom of the dishwasher and directs it to the spray arms, allowing for distribution of water and detergent to the dishes.
A bad Circulation Pump Kit can occur due to wear and tear over time, clogs or blockages in the pump, or electrical malfunctions.
Symptoms of a bad Circulation Pump include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
We pulled the dishwasher out, took it to the garage and set it up on sawhorses and planks so we could access the bottom. We plugged it in and filled it with water and ran a quick cycle. As soon as the circulation pump kicked on water came spraying out from the rubber boot in the diverter assembly. It appears that there was a factory defect in the hose. Unfortunately, the water got into the pump motor over a few loads and was eroding the brushes on the motor. We decided to replace it as well.... Read more
The Electronic Control Board is an OEM replacement part for GE dishwashers. This component acts as the command center, managing the various functions and cycles of the dishwasher, such as washing, rinsing, and drying. The control board processes user inputs and ensures that the dishwasher operates efficiently and effectively, coordinating all the internal systems to perform the selected wash programs.
Causes of a bad electronic control board can include electrical surges, moisture damage, or general wear and tear over time. Additionally, manufacturing defects or issues within the dishwasher’s electrical system can lead to failures in the board’s circuitry, disrupting the appliance's functionality.
Symptoms of a bad electronic control board include:
Fix went fine, had to pull the dishwasher out to replace flood switch control board was very easy to replace, and fixed the problem. Read more