Need Help?
Call or text
Show parts
Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.
Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.
Secures the hinge to your refrigerator cabinet or door. Replace this bolt if stripped, missing, or corroded to restore proper door alignment and stability.
Secures panels, brackets, and internal components in your refrigerator. Replace this mounting screw if the original is missing, stripped, or damaged.
Replacement mounting bolt for refrigerator components and assemblies. Needed when original fastener is missing, stripped, or damaged during service work.
Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.
This part is discontinued by the manufacturer and is no longer available for purchase.
Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.
Replacement mounting screw for refrigerator panels, trim, and components. Secures loose or missing fasteners to reduce vibration and keep parts in place.
Usually ships within 4 - 14 days
Replacement screw for securing refrigerator panels, trim, and brackets. Needed when original fasteners are lost, stripped, or damaged during repair work.
Replacement freezer door handle for bottom-mount refrigerators. Installs on the freezer compartment door. Order if your handle is cracked or broken.
This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does
Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.
Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.
Internal air duct assembly for bottom-mount refrigerators. Routes airflow from fan housing through cabinet. Replace when cracked, damaged, or leaking air.
Replacement shelf assembly for refrigerators. Installs inside fresh food compartment. Needed when original shelf is cracked, broken, or missing.
Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.
Replacement fresh room tray assembly for LG and Kenmore refrigerators. Install this tray if yours is cracked, broken, or has a damaged handle.
Replacement door bin with integrated dairy tray for refrigerators. Installs in door slots to store condiments, drinks, and dairy items. Replace if cracked or broken.
Replacement crisper drawer tray assembly for bottom-mount refrigerators. Replace this part if your vegetable bin is cracked, broken, or missing.
Replacement crisper drawer tray for bottom-mount refrigerators. Organizes fruits and vegetables in the produce drawer. Replaces cracked, broken, or warped trays.
Replacement crisper drawer shelf for bottom-mount refrigerators. Restores stable storage in the produce drawer when original is cracked, broken, or damaged.
Ice tastes stale or smells bad? This refrigerator ice tray cover assembly keeps ice clean and protected from odors. Simple DIY repair restores freshness.
Broken or missing light cover leaving your refrigerator interior dim or exposed? This lens snaps into place in minutes to restore even lighting.
Replaces worn slide rail guide assembly for smooth drawer operation. Install when drawers stick, rub, or misalign. Confirm fit with your model number.
Replacement guide assembly that secures and aligns internal refrigerator components. Use when panels sit loose, or guides are cracked, broken, or missing.
Plastic and metal guide assembly that positions and secures internal components in your refrigerator. Replace if cracked, broken, or missing.
Supports and guides refrigerator drawer for smooth opening and closing. Attaches to cabinet wall. Replace if cracked, worn, or causing drawer misalignment.
Supports and aligns pull-out drawer slides for smooth, even gliding. Replace if your rail guide is cracked, broken, or missing to restore stable drawer operation.
Seals refrigerator door to prevent air leaks and temperature fluctuations. Replace when worn, cracked, or loose to restore energy efficiency.
Magnetic seal that runs around refrigerator door edge to keep cold air in. Replace if torn, loose, or failing to seal properly. Verify fit with model.
Replacement freezer door handle for bottom-mount refrigerators. Installs on freezer compartment door. Replace if broken, cracked, bent, or missing.
The Gasket is an OEM part for Whirlpool refrigerators. This gasket ensures an airtight seal around the door, preventing cool air from escaping and warm air from entering. It's crucial for maintaining the refrigerator's internal temperature and ensuring efficient operation.
Causes of a bad gasket can range from normal wear and tear over time to accidental damage, such as pulling or stretching when cleaning. Replacing a worn or damaged gasket is essential to ensure your refrigerator runs efficiently and to avoid spoiled food or increased energy costs.
Symptoms of a bad gasket include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
The Door Latch Cam is an OEM part for LG refrigerators. This component is integral to the proper functioning of the refrigerator door latch system, ensuring the door stays securely closed.
Over time, the door latch cam can become worn out or damaged due to frequent use, exposure to moisture, or accidental impact. When the cam is compromised, it can affect the door's ability to seal properly, which can lead to energy inefficiency and potential spoilage of food.
Symptoms of a bad door latch cam include:
This OEM LG part is also compatible with Sears/Kenmore.
The Camshaft is an OEM part for LG refrigerators. It plays a crucial role in the proper operation of the refrigerator's door hinge, ensuring smooth and secure opening and closing. The camshaft helps align the door and maintains the seal, preventing warm air from entering the refrigerator.
You should replace the camshaft if it becomes worn out or damaged. Causes of a bad camshaft can include wear and tear from frequent use, physical damage from impact or mishandling, and misalignment issues that stress the camshaft over time.
Symptoms of a bad camshaft include:
This OEM LG part is also compatible with Sears/Kenmore models.
This refrigerator door basket mounts on the inner door and holds bottles, jars, and condiments. Replace a cracked or missing upper bin to restore secure, organized storage and keep frequently used items within easy reach.
What's included: 1 door basket Install notes:
Replace your cracked, broken, or missing refrigerator door bin. This tilting basket mounts in the door for convenient storage of beverages and condiments.
Wire door shelf for refrigerator that mounts inside the door for storage. Replace when cracked, broken, warped, or missing to restore door organization.
Door stop assembly for bottom-mount refrigerators. Mounts inside the door to control door closing and sealing. Replace if broken, cracked, or missing.
Replaces worn or broken lower door hinge that no longer provides proper tension. Installs at the bottom center of French door refrigerators to pivot and support the door. Essential for smooth door operation and proper seal.
Replacement refrigerator door handle assembly. Installs on refrigerator door. Needed when original handle is cracked, broken, or damaged.
Replaces broken or missing freezer drawer roller gear that snaps into the rail hub. Restores smooth drawer gliding and proper door closure in bottom-mount units.
Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.
Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.
Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:
Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.
Replacement ice dispenser funnel for refrigerator doors. Guides ice from chute to glass. Replace if cracked, broken, or missing to prevent spills and jams.
Fix a cracked or damaged dispenser control panel on your bottom-mount refrigerator with this cover assembly. Houses selection buttons and protects electronics.
Replaces broken or cracked ice dispenser lever button on LG refrigerators. Installs on front panel dispenser area. Needed when button ear breaks or cracks.
Replace a cracked, broken, or worn ice dispenser lever on your refrigerator. This actuator paddle installs on the door dispenser panel. Includes video guide.
Dispenser drain tray collects water from the ice and water dispenser. Replace if your tray is cracked, discolored, worn, or missing to prevent leaks.
Plastic cap that covers and seals the air duct in your refrigerator. Replace if cracked, broken, or missing to maintain proper airflow and appearance.
Refrigerator not cooling or blowing warm air? This compressor assembly restores proper cooling. Advanced repair requiring EPA certification for refrigerant.
This motor overload protector helps prevent motor overheating by cutting power if the motor draws excessive current or gets too hot. It restores normal operation once the motor cools, helping protect the main motor from heat-related damage. What it does:
Refrigerator clicking but not cooling? The compressor start relay kickstarts your compressor. Simple 30-minute DIY fix that gets your fridge cold again.
Protective cover for your refrigerator's PTC and compressor start device assembly. Replace if cracked, melted, or missing to shield components from damage.
Freezer too cold while fridge is warm? This damper motor support controls airflow between compartments. Common fix for temperature imbalance issues.
Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.
Water pooling under your refrigerator? This defrost drain tray collects and channels condensation water to prevent leaks and buildup beneath the unit.
Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.
Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.
Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.
Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.
Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.
Replacement drip tray for refrigerators. Installs under evaporator coils to catch condensation and defrost water. Replace if cracked, warped, or missing.
Fix loud grinding noise or warm freezer with this evaporator fan assembly. Circulates cold air between compartments. 15-minute repair for most DIYers.
Fix error code ER DH or ice buildup in your freezer with a new defrost control assembly. Regulates defrost cycles to prevent frost. Moderate DIY repair.
Refrigerator light won't turn off when door closes? This door switch controls interior lighting based on door position. Simple DIY repair.
Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.
If your refrigerator is noisy or not cooling evenly, the evaporator fan motor may need replacement. 15-30 minute repair requires freezer panel removal.
Secures and supports the motor assembly in your refrigerator, keeping it aligned and reducing vibration. Replace if cracked, broken, or worn to restore stable mounting.
Ice dispenser flap won't close or open? This solenoid assembly controls the ice door mechanism. DIY-friendly repair, typically takes 1 hour to replace.
Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.
Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.
Replacement mounting bracket that secures internal components to the cabinet frame. Needed when original is cracked, bent, or broken, causing loose parts.
Fix frost buildup and uneven cooling in your refrigerator with this evaporator defrost heater. Melts ice from coils during defrost cycles. Moderate repair.
Freezer light not working? This LED light assembly fixes dim, flickering, or dead freezer lights in 10-15 minutes with basic tools. Simple DIY repair.
Replace your refrigerator's LED light assembly when lights flicker, dim, or fail. Restores bright, energy-efficient interior lighting. Verify fit by model.
Refrigerator won't cool or compressor won't start? This run capacitor provides the electrical boost needed for smooth compressor operation. DIY repair.
Refrigerator not cooling evenly or making loud noises? This evaporator fan motor circulates cold air across coils to maintain consistent temperatures.
Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.
Replace the interior light housing cover in your refrigerator. Needed when the original lamp case is cracked, broken, or missing. Installs inside the fridge.
Protects and diffuses the interior lamp for even lighting. Replace if cracked, yellowed, or broken to restore visibility and shield the bulb from spills.
Refrigerator not cooling properly or showing temperature errors? This temperature sensor monitors compartment temps and sends readings to the control board.
Ice maker stopped making ice or won't eject cubes? This complete assembly replaces a faulty unit. DIY-friendly repair, typically 10-15 minutes to install.
Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.
Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.
Refrigerator not cooling properly or freezing food? A faulty temperature sensor causes inconsistent temps. Simple DIY fix restores accurate cooling.
Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.
Fridge freezing food or not cooling? This temperature sensor monitors internal temps and signals the control board. Fixes ER FF errors. Easy install.
The Ice Bucket Assembly is an OEM component for LG refrigerators. This assembly includes the ice bucket and components needed for ice storage and removal. It plays an important role in storing ice produced by the icemaker and providing easy access to ice through the freezer door.
Causes of a bad ice bucket assembly can include damage to internal parts like the ice scoop or issues with the sliding and dumping mechanics over time. Wear and tear is also common as this assembly undergoes frequent usage.
Symptoms of a failed ice bucket assembly include:
This replacement is also compatible with Sears/Kenmore models that utilize the LG icemaker system.
Plastic tube that routes water between internal refrigerator components. Replace if cracked, kinked, leaking, or brittle to restore water flow.
Fix water leaks or no water flow to your ice maker with this refrigerator water line elbow. Connects water supply lines in bottom-mount refrigerators.
Water supply tube that connects the water valve to your refrigerator's ice maker. Replace if cracked, leaking, or damaged to restore proper water flow.
Water supply line that connects the valve to the ice maker or dispenser in your refrigerator. Replace if cracked, split, or leaking at connections.
Water supply line connects reservoir to dispenser and ice maker. Replace if cracked, leaking, or damaged at connection points. Installs inside refrigerator.
Fix no water or ice, leaking valve, or slow water flow from your dispenser. This refrigerator water inlet valve is a straightforward DIY repair.
Fix no water or ice issues with this water inlet valve. Common when ice maker won't fill or dispenser trickles. Easy 10-minute DIY with video guide.
Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.
Plastic trim cap that snaps over exposed fasteners and mounting posts on your refrigerator. Replace if cracked, broken, missing, or discolored.
The water filter cover 3550JD1128E attaches over the water filter and protects the water filter and head.
This is a water filter intended for use with LG refrigerators. It is used in tandem with the water dispenser on the refrigerator door to purify drinking water. Replacing thee water filter every six months on average is recommended. It is necessary to swap out every year at a minimum, depending on how frequently it is used.Indications that the water filter needs to be switched include water with unusual odors or tastes. The components used to filter the water will stop working, allowing contaminants that could be dangerous to break off and enter the drinking water. Replacement of the LG water filter is simple. Remove the old filter and screw the new one into place in just a few seconds.This LG water filter is a genuine OEM replacement part. It is sold individually. The LG water filter comes sourced directly from the manufacturer and is made of high-quality, durable materials. The LG water filter is only compatible with LG brand refrigerators.
Molded protective housing that shields internal wiring and hoses from wear and debris. Replace if cracked, broken, or missing to maintain safe operation.
Plastic clip secures tubing and pipes inside your refrigerator. Replace if cracked, broken, or missing to keep lines properly routed and organized.
Secures internal components in place to prevent rattling and misalignment. Replace if cracked, broken, or missing. Confirm fit with your model number.
This upper hinge assembly secures and guides the refrigerator door, restoring proper door alignment and smooth opening/closing. It replaces a worn or damaged hinge to help stop sagging, rubbing, or noisy movement. What it does:
Secures and pivots the ice bank door for smooth opening and proper sealing. Replace if door sags, won't close, or ice dispenser misaligns. Confirm fit.