Refrigerator Gasket & Seal

Color: White

The Door Gasket is an OEM part for Whirlpool refrigerators. It creates an efficient seal between the refrigerator door and cabinet to maintain optimal interior cooling temperatures and humidity levels. Made of durable yet flexible material, the door gasket surrounds the perimeter of the door opening and prevents warm air and moisture from seeping inside.

Causes of a bad door gasket include normal wear over time exposing the gasket to constant opening and closing of the door.

Symptoms of a failing gasket are:

• Difficulty keeping the door properly closed 
• Higher electric bills from the refrigerator running more often
• Items inside cooling improperly or becoming frozen on the edges
• Buildup of frost or condensation occurring inside

Color: White

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Kenmore models. Replace yours to restore effective insulation and energy efficiency.
 

This oven light lens gasket seals the lens to the oven liner, helping keep heat, steam, and grease out of the light housing. It maintains a secure fit for the lens and protects the bulb and wiring.

• Creates a heat-resistant seal between the light lens and oven cavity
• Helps block heat, steam, and grease from entering the light assembly
• Stabilizes the lens/retainer so the lens sits flush and secure
• Common signs of failure: torn/brittle gasket, lens feels loose, condensation or grease inside the lens, or scorching around the light opening

• Disconnect power at the breaker and allow the oven to cool completely before servicing
• Remove the lens retainer and lens to access the gasket; note orientation before removal
• Seat the new gasket evenly around the opening, then reinstall the lens and retainer without overtightening
• The lens sits flush and the seal is even after reassembly

The Fresh Food Door Gasket is an OEM component specifically designed for GE side-by-side refrigerators. This gasket creates a tight seal around the perimeter of the fresh food door to contain cool air inside the refrigerator compartment.  

Causes of a bad gasket include wear and tear over time, damage from overtightening the door, or impact/warping of the gasket frame.

Symptoms of a bad fresh food door gasket include:

• Cool air leaking from the fridge and warmer temperatures inside 
• Frost or condensation building up inside the door walls
• The door not sealing properly
• Higher energy bills

Replace yours with this genuine GE part to restore proper insulation, prevent warm air exchange, and improve cooling efficiency. This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This replacement door gasket forms the perimeter seal on the refrigerator door. It keeps cold air in and humid room air out to maintain temperature and help prevent frost and condensation when the original seal is worn or damaged.

• Creates an airtight seal between the door and cabinet
• Helps maintain proper internal temperature and reduce frost and moisture
• Resolves: visible tears, hardened or misshapen gasket, gaps at corners, or door not closing fully
• Symptoms can include condensation around the door, frost buildup, or warming in the compartment

• Unplug the appliance before starting
• Gently pull the old gasket from the retainer/channel, noting orientation
• Warm the new gasket in hot water or with gentle heat to relax creases; do not overheat
• Press the gasket lip fully into the channel, work evenly around the door, square the corners, and ensure even contact all around when closed

Color: Black

Color: Black

This is the perimeter seal for the refrigerator's fresh food compartment door. It restores an airtight seal to keep cold air in and humid room air out, helping maintain temperature, reduce condensation, and improve overall efficiency.

• Seals the fresh food door opening to prevent air leaks
• Helps stabilize internal temperature and reduce run time
• Replace if torn, cracked, deformed, or not sealing evenly
• Symptoms can include condensation or moisture around the door, warm spots, frost near the door edge, or the door not closing fully

• Disconnect power; allow the door area and new gasket to warm to room temperature
• Soften the new gasket in warm water to relax bends before installation
• Remove the old gasket; seat the new one fully into the channel, starting at the corners—do not stretch
• Use gentle, low heat (hair dryer) to smooth waves; perform a "paper test" around the perimeter and adjust hinges if needed

Refrigerator Door Gasket is essential for maintaining an airtight seal on your Samsung refrigerator. This high-quality gasket ensures that cold air stays inside, helping your appliance operate efficiently and reducing energy consumption. Designed as a genuine OEM part, it guarantees a perfect fit and seamless compatibility with a range of Samsung refrigerator models. The durable material resists wear and tear, providing long-lasting performance and preventing leaks that could lead to higher utility bills. Installing the Refrigerator Door Gasket is straightforward, allowing you to restore your fridgeGÇÖs functionality quickly without the need for professional assistance. By replacing a worn or damaged gasket with this genuine OEM part, you enhance the overall performance of your refrigerator, ensuring your food stays fresher for longer. Trust in this reliable replacement part to deliver consistent results and improve the efficiency of your Samsung appliance, offering you peace of mind and a better user experience.

Color: Black. Size: 23 3/4 inches x 31 1/2 inches. For white order WP12550116Q.

This refrigerator door gasket seals the door to the cabinet to keep cold air in and moisture out. Replacing a worn or deformed gasket restores a reliable seal, steadier temperatures, and more efficient performance.

• Creates an air-tight seal around the door perimeter
• Helps maintain correct temperatures and reduce frost or condensation
• Supports proper door closing and overall cooling efficiency
• Replace if the gasket is torn, cracked, warped, hardened, or leaves gaps; if the door pops open; or if you see moisture/frost along the door edge

• Disconnect power; remove items from the door bins for access
• Pull the old gasket from the retainer; transfer/loosen corner screws if applicable
• Warm the new gasket (hot water or low-heat hair dryer) to relax it; seat the lip evenly, corners first
• Close the door and check for uniform contact; adjust with gentle heat and by leveling/hinge alignment if needed; allow up to 24 hours for the gasket to fully conform

This ice dispenser chute gasket seals the opening at the freezer door's ice chute, helping block warm, humid air from entering. A proper seal reduces frost and moisture around the dispenser and helps keep ice from clumping near the chute.

• Seals the gap between the ice door/flapper and chute to limit air leaks
• Helps minimize frost, condensation, and ice buildup in the dispenser area
• Replaces a torn, flattened, or missing gasket that prevents a tight seal

• Disconnect power to the refrigerator before servicing
• Remove the dispenser front panel/escutcheon to access the ice door and chute area
• Remove the old gasket, clean the mating surfaces, and seat the new gasket evenly all around
• Ensure the ice door/flapper moves freely and seals uniformly before reassembly

This refrigerator door gasket creates a tight seal between the door and cabinet to keep cold air in and moisture out. Replacing a worn gasket helps maintain proper temperatures, reduce frost buildup, and improve efficiency. What it does:

• Seals the door perimeter to prevent air leaks
• Helps maintain consistent interior temperature and humidity
• Replace if the gasket is torn, cracked, warped, or the door won't seal properly
• Common symptoms include condensation or frost along the door, warm spots, and longer run times

• 1 door gasket

• Unplug the appliance before servicing
• Warm/relax the new gasket (room temperature or brief warm-water soak) to ease installation
• Seat the gasket fully into the retainer; ensure corners fit squarely. Some models require loosening retainer screws, then retightening
• After installation, check the seal with a paper slip around the door and adjust hinges/gasket as needed; use gentle heat to smooth waves

The Freezer Door Gasket is an OEM part for LG refrigerators. This gasket is designed to fit around the perimeter of the freezer door, creating an airtight seal that prevents warm air from entering and cold air from escaping. This ensures the freezer maintains a consistent temperature, which is essential for preserving food quality and reducing energy consumption.

Causes of a bad door gasket can include wear and tear from frequent use, exposure to harsh cleaning chemicals, or physical damage from sharp objects or accidental impacts.

Symptoms of a bad freezer door gasket include:

• The freezer door not closing properly
• Visible cracks, tears, or deformities in the gasket
• Frost or ice buildup inside the freezer
• Increased energy consumption due to the freezer working harder to maintain temperature

This OEM LG part is also compatible with Sears/Kenmore models.

The Refrigerator Door Gasket is essential for maintaining the efficiency of your Samsung refrigerator. This genuine OEM part ensures a precise fit, creating an airtight seal that helps keep your food fresh by maintaining the proper temperature inside. Crafted from high-quality materials, the gasket is durable and resistant to wear, providing long-lasting performance and preventing energy loss. Installing the Refrigerator Door Gasket is straightforward, allowing you to quickly restore your appliance's functionality without hassle. By replacing a worn or damaged gasket with this genuine OEM part, you enhance your refrigerator's ability to retain cold air, reduce moisture buildup, and minimize the risk of leaks. Compatible with a wide range of Samsung refrigerator models, this door gasket is a reliable choice for DIY repairs. Investing in this genuine OEM part not only extends the lifespan of your refrigerator but also ensures it operates efficiently, delivering a better experience in your kitchen.

Color: Grey

The Gasket-FIP (STL) is an OEM part for Whirlpool side-by-side refrigerators. This gasket fits around the fresh food evaporator inlet pipe inside the refrigerator. Its purpose is to form an airtight seal to prevent air leaks and increase efficiency.

Symptoms of a bad gasket include: 

• Higher than normal energy usage
• Formation of frost or ice buildup in unexpected areas 
• Temperature fluctuations inside the refrigerator or freezer compartments
• Strange odors coming from the refrigerator

Causes of a bad gasket can be wear and tear over time, cracks or tears in the sealing material, or improper installation that does not allow for a tight seal. 

This OEM Whirlpool replacement part is also compatible with Maytag, Jenn-Air, Amana, and some Kenmore models.

This freezer door gasket creates an airtight seal between the door and cabinet to keep cold air in and humidity out. A tight seal helps maintain proper temperatures and reduces frost buildup and energy loss.

• Seals the freezer door perimeter to prevent warm, moist air from entering
• Helps reduce frost/ice buildup and temperature swings
• Common failure signs: torn or warped gasket, gaps around the door, frost forming quickly, door not sealing unless pushed
• Restores proper door closure and sealing performance

• Unplug the appliance before service
• Soften the gasket in warm water or with a low-heat hair dryer to ease installation and improve fit
• Remove and reinstall retainer screws or press-in tabs as applicable; work evenly around the door
• Check door alignment and perform a dollar-bill test around the perimeter to confirm a uniform seal