Craftsman Carburetor

Here is a replacement welch plug for use with the carburetor on small engines and various pieces of outdoor lawn equipment. It is important for a carburetor to have a tight seal, which will prevent an influx of air and cause issues with the fuel mixture. The welch plug is meant to prevent these issues. Over time, the plug could have lost its seal, it could have become corroded, or cracked, or it could have become lost. This could cause a loss of power or for the engine to run rough. Owners must replace the welch plug as soon as possible to avoid issues with their engine. This welch plug is a genuine OEM replacement part that is sold separately. The plug can be used on many different types of small engines and lawn equipment, such as lawn mowers, snowblowers, lawn tractors, and chippers. Compatible brands include Craftsman, Toro, MTD, Lawn-Boy, Cub Cadet, and Tecumseh.

Carburetors must have tight seals to prevent too much air from getting into the carburetor at one time. If there are issues with a welch plug, it could cause an engine to lose power or to run rough. The plug might have lost its seal, it could have cracked, or it could have become lost. Sometimes, the vibration of the engine is enough to cause a plug to fall out if it is not tightly sealed. A loose fit will cause problems with the flow of fuel. This genuine OEM welch plug is sold individually and can help to seal your carburetor so your engine retains power. The part can be used with a range of lawn tractors, lawnmowers, snowblowers, and small engines. Compatible brands include Tecumseh, Lawn-Boy, Toro, Craftsman, and MTD.

This is a genuine OEM carburetor sourced directly from the manufacturer designed for use in tillers and other small engines. The carburetor controls the mixture and gas and air that reaches the engine at different speeds. Regular use for prolonged periods can lead to the carburetor's failure, resulting in a sluggish engine and reduced fuel economy. A buildup of debris in the carburetor can also cause failure due to clogged airways preventing fuel from reaching the engine. Replacing the carburetor will solve these problems and is much less costly than buying entirely new equipment. Replacing the carburetor requires less than hour of work and a screwdriver, socket or wrench set, and clean basin. Remove the spark plug from the engine and drain the fuel into the clean basin. Locate the air filter and remove it. Remove the fuel line and crankcase. Remove the carburetor from the engine. Install the new carburetor. Reinstall the parts in reverse order. Start the engine and test the carburetor. This is a carburetor made of heavy-duty metal and molded plastic parts; it is sold as an individual pre-assembled unit. The carburetor is compatible with tillers and other small engines manufactured by Toro, Tecumseh, Cub Cadet, and Craftsman.

This is a main nozzle tube replacement for use with a range of different types of outdoor equipment and small engines. Another name for the main nozzle tube is the fuel jet. The fuel will turn into a vapor and then travel through the main nozzle in a vacuum process. This draws the air into the Venturi pipe. The main nozzle tube is made from plastic, and it can eventually start to break down and wear away. When this happens, it will no longer be efficient. Owners might find that the engine is not running smoothly, or that it is difficult to start the engine. Replacing this element of the system could be what is needed. This is a genuine OEM main nozzle tube replacement. It is sold individually and works for various models of lawn mower, snowblower, tiller, pressure washer, generator, log splitter, wood chipper, and other small engines. Compatible brands include MTD, Toro, Cub Cadet, Lawn-Boy, Craftsman, and Briggs & Stratton. Owners should always ensure they are getting the correct replacement for their make and model.

This is a genuine replacement idle screw restrictor that is designed for select lawn and garden equipment engines. The idle restrictor screw is what is responsible for controlling the engine idle or engaging the engine to allow the machine to do its job. This is a durable screw, but it is subject to repetitive motion and constant wear, which means it can become damaged over time. In some cases, it may even get lost in the course of other repairs. It needs to be replaced because the machine will not work without it.This genuine OEM idle screw restrictor is manufactured by Tecumseh. It meets exact standards as an original replacement part and it can be used in machines from Lawn Boy, MTD, and Toro, as well. The part is sold individually. Other parts or hardware will require a separate purchase. A pair of pliers and a screwdriver will be necessary to make this repair. It is important to wear gloves when performing repairs on snow throwers and lawnmowers. Be sure to allow the engine to cool completely before doing any work and always work in a well-ventilated area.

This part includes the primer bulb in addition to the carburetor itself. A carburetor mixes fuel and air before delivering it to the engine to produce power. The gaskets form a seal that prevents too much air from getting mixed with the gas. A new carburetor may be needed if there is an air or gas leak. When there's a slight air leak, the operator may notice engine roughness when it's at idle. A larger air leak will cause the engine to vibrate, misfire, or hesitate under acceleration.It's important to let the engine cool and to drain the gas tank before beginning a replacement of the carburetor. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This carburetor is used on engines and snowblowers manufactured by Tecumseh, Husqvarna, and Toro.