Parts for Kenmore Elite 79572053318: Freezer Parts

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Secures the hinge to your refrigerator cabinet or door. Replace this bolt if stripped, missing, or corroded to restore proper door alignment and stability.

Replacement mounting screw for refrigerators. Secures internal components and panels. Order when original hardware is stripped, lost, or damaged.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.

Secures panels, brackets, and components inside your refrigerator. Replace this fastener if worn, missing, or stripped to restore proper assembly.

Replacement freezer door handle for bottom-mount refrigerators. Installs on the freezer compartment door. Order if your handle is cracked or broken.

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Refrigerator not cooling evenly or warm spots in fresh food section? A cracked air duct disrupts cold air flow. This assembly restores proper circulation.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Door won't close or swings too far? This hinge stop limits door swing and restores proper alignment. Simple snap-in installation takes minutes.

Refrigerator shelf roller assembly that attaches to pull-out shelves for smooth gliding. Replace if rollers are cracked, broken, or wheels no longer spin freely.

Replacement freezer tray for refrigerators. Organizes and stores frozen foods in the freezer compartment. Replace if cracked, broken, or damaged.

Drawer tray assembly forms the shelf base for slide-out bins in your refrigerator. Replace if cracked, warped, or broken to restore stable storage.

Replacement freezer drawer tray assembly for bottom-mount refrigerators. Installs in freezer section for organized storage. Needed when cracked or broken.

Replacement freezer tray for refrigerators. Organizes and stores frozen foods in the freezer compartment. Replace if cracked, broken, or damaged.

Replace a cracked, broken, or missing net shelf in your refrigerator door. This mesh-style storage shelf installs on the door to organize items.

Complete shelf assembly for refrigerator interior storage. Replaces cracked, broken, or worn shelves that no longer hold items securely inside your fridge.

Mesh shelf net for refrigerator door or interior shelves. Secures bottles, cans, and small items. Replace when torn, sagging, or missing.

Replace cracked, broken, or missing refrigerator glass shelf. Restores flat, level storage surface across the full width of your compartment.

Replace a cracked, broken, or missing refrigerator glass shelf. This tempered glass shelf assembly installs inside your fridge to restore storage.

This rail holder secures the drawer glide rails in your refrigerator. Replace if the holder is cracked, broken, or missing, causing drawer instability.

Secures rails or guides in your refrigerator to keep racks and sliding components aligned. Replace if clip is broken, cracked, or missing to restore fit.

Telescopic rail guide assembly for smooth freezer drawer sliding. Replace if drawer sticks, wobbles, or won't extend fully. Verify fit by model number.

Slide rail for refrigerator freezer drawers. Supports the drawer and enables smooth in-and-out sliding. Replace if broken, cracked, or causing instability.

Broken or cracked fresh room drawer? This refrigerator tray assembly replaces damaged drawers in the fresh food compartment. Simple swap-out repair.

Freezer drawer rail assembly for refrigerators. Supports and guides the freezer drawer for smooth sliding. Replace when rails are broken, cracked, or worn.

Right-side support rail for refrigerator freezer baskets. Replaces cracked, broken, or worn rails causing baskets to slide poorly or fall off track.

Left-hand support rail for bottom freezer baskets. Replace this plastic slide rail if cracked, broken, or missing to restore smooth drawer operation.

Replaces cracked or warped tray cover that supports refrigerator bins. Restores a level surface to keep items stable and allows drawers to glide smoothly.

Replacement vegetable crisper tray for your refrigerator's fresh food compartment. Replace cracked, broken, or missing trays to restore organized storage.

Replaces cracked, warped, or broken refrigerator crisper drawer pan. Provides secure storage surface for produce in the fresh food compartment.

This cover assembly finishes and protects the T/V control/display area, keeping the buttons and display aligned while shielding internal electronics. Replacing a cracked or loose cover restores proper fit, clean appearance, and reliable button operation.

• Provides front trim and protective housing for the T/V control/display module
• Supports correct alignment of buttons/touch areas and display/light windows
• Protects internal wiring and boards from impact and incidental moisture
• Common symptoms: cracked or chipped trim, broken mounting tabs, loose or rattling panel, misaligned or sticky buttons

What's included: One cover assembly. Install notes:

• Disconnect power before servicing to avoid electrical shock
• Use a plastic trim tool to release clips and prevent scratching the finish
• Transfer any lenses, brackets, switches, or display boards from the old cover to the new one
• Ensure all tabs fully engage and any screws are snug; do not overtighten

Fix drawers that stick, wobble, or won't slide smoothly with this refrigerator guide assembly. Ensures proper alignment and stable movement.

Supports and guides your refrigerator's crisper bin for smooth sliding. Replace this track assembly if worn, cracked, or causing drawer misalignment.

Replace a cracked or worn drawer rail guide assembly in your refrigerator. Supports and guides pantry, crisper, or freezer drawers for smooth sliding.

Supports and aligns refrigerator drawers for smooth sliding. Replace when worn, cracked, or broken to restore proper drawer alignment and operation.

Support rail that guides your refrigerator crisper drawer for smooth sliding. Replace if rail is cracked, broken, or rollers are worn or missing.

Outer housing for the Magic Room compartment. Replaces cracked, warped, or damaged case to restore proper fit and maintain compartment appearance and integrity.

Complete freezer door assembly for bottom-mount refrigerators. Replaces damaged, dented, or cracked doors. Includes outer panel and foam insulation.

Complete freezer door assembly for bottom-mount refrigerators. Replaces damaged, dented, or cracked doors. Includes outer panel and foam insulation.

Creates an airtight seal around your refrigerator door to prevent warm air from entering. Replace if torn, cracked, or no longer sealing properly. Easy snap-fit installation. Confirm fit with your model number.

Replace a cracked, broken, or missing refrigerator door basket. This bin mounts to the inner door to organize and hold bottles, condiments, and small items.

Color: Stainless

Replacement name plate for your refrigerator. This identification label installs on the exterior or interior and may need replacing if faded, peeling, or missing.

Seals refrigerator door to maintain temperature and energy efficiency. Replace if torn, cracked, or not sealing properly. Verify fit with model number.

Seals refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or moldy. Confirm fit with your model number.

Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.

Sliding rail that guides refrigerator drawers for smooth opening and closing. Replace if drawers stick, sag, or come off track. Verify fit by model.

Door basket assembly for refrigerator door storage. Replaces cracked, broken, or missing baskets. Hooks attach to door knobs for secure mounting.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Refrigerator door shelf bin installs on the refrigerator door for storing condiments and beverages. Replace if cracked, broken, or damaged.

Replacement door shelf bin for refrigerator doors. Holds bottles, jars, and condiments. Replace if cracked, broken, or damaged. Installs on door interior.

Replaces a broken or missing door stopper assembly on your refrigerator. Cushions door movement and holds the door in position to prevent slamming.

Mounts at the hinge to control door opening range and promote smooth closing. Replace if cracked, broken, or worn to restore proper door swing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replaces worn or broken lower door hinge that no longer provides proper tension. Installs at the bottom center of French door refrigerators to pivot and support the door. Essential for smooth door operation and proper seal.

Shelf rail connector for refrigerators. Secures and aligns shelf rails inside the fresh food compartment. Replace if cracked, broken, or missing.

Drawer rail connector for bottom-mount refrigerators. Secures drawer glide rails to the cabinet frame. Replace if cracked, broken, or missing to restore drawer stability.

Replace worn drawer slide rails to restore smooth, quiet operation in your refrigerator. Guides and supports sliding drawers securely. Verify fit by model number.

Replacement door hinge assembly for refrigerators. Supports and pivots the door for smooth operation. Replace if bent, worn, or broken to restore alignment.

Freezer drawer slide rail for refrigerators. Installs inside the freezer compartment to support smooth drawer operation. Replace if cracked or broken.

Supports and guides the lower freezer drawer for smooth opening and closing. Replace if rail is cracked, broken, or drawer no longer glides properly.

Replacement door bar for bottom-mount refrigerators. Installs on the interior door to hold items in place. Order a new one if cracked or broken.

Replaces broken or missing freezer drawer roller gear that snaps into the rail hub. Restores smooth drawer gliding and proper door closure in bottom-mount units.

Secures and aligns your refrigerator door for stable movement and proper sealing. Replace if door sags or doesn't close correctly. Confirm fit with model.

Replace your refrigerator's center door hinge to restore proper alignment and seal between upper and lower doors. Fixes sagging, gaps, or misalignment issues.

Secures and aligns your refrigerator door for smooth operation. Replace when doors sag or don't seal properly. Confirm fit with your model number.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Fix loose or inconsistent mechanism action in your refrigerator with this tension spring. Restores smooth operation when worn spring causes parts to move improperly.

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Replacement refrigerator door hinge that restores smooth pivoting and proper door alignment, helping the door open and close reliably and maintain an airtight seal to preserve cooling performance. What it does:

• Supports the refrigerator door and allows it to pivot smoothly.
• Replaces worn, bent, or damaged hinges that cause door sag or misalignment.
• Helps reduce noisy or grinding door operation when the hinge is failing.
• Promotes an even door seal to help maintain internal temperature consistency.

• Unplug the appliance and remove food from nearby shelves before starting work.
• Support the door while removing hinge fasteners to prevent dropping or damage.
• Reinstall using the original hardware; align the door and tighten fasteners securely but avoid overtightening.

Plastic cap assembly that covers and seals the ice dispenser chute opening. Replace if cracked, broken, or missing to prevent air leaks and ice melting.

Control panel lights unreadable or dim? This LED cover lens protects and diffuses display indicators, restoring clarity. Simple snap-in replacement.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Mounting bracket that supports the dispenser paddle behind your refrigerator's front panel. Replace if cracked, broken, or lever feels loose or misaligned.

Secures the dispenser lever in place on your refrigerator. Replace if retainer is cracked, broken, or missing to restore proper lever stability.

Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.

Display not lighting up or controls unresponsive? This refrigerator display power control board restores normal display illumination and touch input.

Channels ice from dispenser to door opening. Replace if cracked, broken tabs, or missing to restore proper ice delivery and prevent jams or leaks.

Fix unresponsive or stuck control panel buttons with this button assembly. Restores reliable selections when buttons won't click or respond intermittently.

Replaces a damaged, cracked, or missing exterior cover panel on your refrigerator. Restores appearance and protects internal components from dust.

Molded trim piece that snaps over the refrigerator door hinge. Replace if cracked, broken, or missing to restore appearance and protect hinge area.

Plastic cover cap that conceals and protects the hinge assembly on your refrigerator door. Replace if cracked, broken, discolored, or missing for a clean finish.

Cosmetic trim ring that fits around your refrigerator drain opening. Replace when cracked, broken, or missing to restore a clean, finished look.

Fix a too-cold fridge or freezing food with this air damper assembly. Controls airflow between compartments to restore proper temperature balance.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Refrigerator not cooling properly? This condenser coil assembly releases heat to keep your fridge cold. Professional installation recommended for evacuation.

Fix refrigerator not cooling or freezing issues with this evaporator assembly. Essential component for proper temperature control in bottom-mount models.

Compressor running hot or error code 22? This thermistor assembly monitors compressor temperature to prevent overheating. 10-minute DIY repair.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Fix erratic temperature readings or sensor errors with this PTC sensor cover. Shields the sensor from debris and damage. Simple 5-minute snap-on repair.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Water pooling inside your refrigerator? This drip tray collects condensate and defrost water to prevent leaks. Direct-fit replacement part.

Fixes uneven cooling and scraping noises by directing airflow from the fan. This guide restores proper air circulation throughout your refrigerator.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Drain tray assembly for bottom-mount refrigerators. Collects defrost water beneath the unit. Replace if cracked, broken, or leaking onto the floor.

Water pooling under your refrigerator? This drain tray assembly collects condensate and directs it properly to prevent leaks and water damage.

Front cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged exterior cover panels. Essential for restoring appearance.

Refrigerator making unusual grinding noises or exposed machinery? This machinery cover assembly shields internal components from debris and damage.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix uneven cooling or frozen food in fresh food section with this refrigerator air damper. Controls airflow between compartments to balance temperatures.

Fix loud grinding noise or warm freezer with this evaporator fan assembly. Circulates cold air between compartments. 15-minute repair for most DIYers.

Freezer frosting over or refrigerator not cooling? This defrost control assembly regulates the defrost cycle to prevent ice buildup. Moderate DIY repair.

Fridge won't cool or evaporator coil freezing over? The defrost control assembly regulates cooling and defrost cycles. Moderate DIY repair.

Refrigerator light won't turn off when door closes? This door switch controls interior lighting based on door position. Simple DIY repair.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Refrigerator not cooling or running warm? A faulty condenser fan motor assembly prevents proper airflow across the condenser. Includes motor and blade.

If your refrigerator shows an ER RF error code or won't cool properly, this fan motor assembly restores airflow. Moderate DIY difficulty repair.

Fix a warm fridge or RF error code with this evaporator fan motor. Repairs grinding noises and restores proper cooling. 2-hour DIY install with video.

Replace a damaged or broken motor cover in your refrigerator. This protective cover shields the motor assembly from dust and debris. Simple repair.

Replace your refrigerator's light cover lens to restore proper illumination and protect the bulb. Fits if your dome light lens is cracked or yellowed.

Air duct shroud cover for bottom-mount refrigerators. Replaces cracked, broken, or missing plastic shroud that directs airflow inside the unit.

Refrigerator light bulb cover protects the interior bulb from moisture and damage. Replace if cracked, yellowed, or broken to restore proper lighting.

Fix unusual noises or vibrations from your refrigerator with this motor bracket. Secures the compressor motor in place. Basic DIY repair with common tools.

Refrigerator motor bracket secures the compressor or fan motor in place. Fixes excessive vibration or rattling noises. Moderate DIY repair.

Refrigerator light bulb cover protects the interior bulb from moisture and damage. Replace if cracked, yellowed, or broken to restore proper lighting.

Fix unusual noise or vibration from your refrigerator with this motor bracket. Secures the motor assembly for quiet operation. DIY-friendly repair.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Ice maker not working or fridge warming unevenly? This fan motor circulates cold air throughout your refrigerator. DIY-friendly repair in 1-2 hours.

Fix frost buildup and poor cooling with a new defrost heater. Melts ice from evaporator coils during automatic defrost cycles to maintain stable temps.

The Defrost Heater is an OEM part for LG refrigerators. This part is responsible for melting away frost and ice that accumulates on the evaporator coils during the cooling cycle, ensuring the refrigerator operates efficiently and maintains the proper temperature.

Common causes for defrost heater failure include electrical failures such as blown fuses or faulty wiring, wear and tear from normal use, and damage from moisture or corrosion. 

Symptoms of a failing Defrost Heater include:

• Buildup of frost in the freezer compartment
• The refrigerator struggling to maintain the set temperature
• Leaks inside the refrigerator due to ice melting inconsistently
• Increased energy usage as the fridge works harder to cool

This OEM LG part is also compatible with some Kenmore models.

LED light assembly that mounts in the freezer compartment to illuminate the bottom drawer. Replace if the light housing is cracked, broken, or missing.

Replace your refrigerator's interior LED light assembly when lighting fails or dims. Restores bright illumination for clear visibility. Verify fit with your model.

LED light assembly for bottom-mount refrigerators. Replaces broken, dim, or non-functional interior lighting module. Installs in fresh food compartment.

Refrigerator won't cool or compressor won't start? This run capacitor provides the electrical boost needed for smooth compressor operation. DIY repair.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

Refrigerator won't power on or loses power intermittently? This power cord assembly replaces frayed or damaged cords to restore safe, reliable operation.

Refrigerator not cooling or running constantly? This power control board manages compressor and temperature functions. Moderate difficulty repair.

Refrigerator not cooling or displaying error codes? This power control board regulates electronic functions. Fixes intermittent operation issues.

Refrigerator won't start, controls unresponsive, or running constantly? This main control board manages power distribution and component coordination.

Ice maker stopped making ice or won't eject cubes? This ice maker assembly fixes frozen or stuck trays. DIY install in 30-60 minutes with basic tools.

Secures components in your refrigerator assembly, reducing vibration and keeping parts properly seated. Replace when damaged or missing to restore snug fit. Verify model compatibility before ordering.

Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Refrigerator not cooling properly? A failed evaporator fan motor stops cold air circulation. This motor replacement restores airflow across the coils.