Range / Cooktop / Oven Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10259865
The 8 Inch Large Surface Element is an OEM part for Whirlpool cooktops and ranges, designed to provide reliable and consistent heat for cooking. This large surface element is crucial for performing a wide range of cooking tasks, from boiling water to frying and sautéing. For matching 6 inch element order WP660532.
The primary reasons for replacing the 8 Inch Large Surface Element often involve wear and tear from regular use, physical damage, or electrical issues within the element itself.
Symptoms indicating the need for a replacement 8 Inch Large Surface Element include:
- The element not heating up, indicating a failure to provide the necessary cooking temperature
- Uneven heating, resulting in inconsistent cooking results
- Visible damage to the element, such as blistering, peeling, or cracking
- The element heating slowly or not maintaining the desired temperature during use
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014
Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday.
This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire...
Read more
More
$97.95
- Compare At:
-
$117.54
- You Save:
-
$19.59
Genuine Ge part
By: Ge
Part Number: WB31X46066
This 8-inch drip bowl sits beneath the surface coil on your range to catch spills and support the element. Replacing a rusted or stained bowl refreshes the cooktop and helps the coil sit level for reliable heating.
- Collects drips and boilovers under the 8-inch surface coil
- Positions and supports the element over the receptacle
- Helps keep the cooktop cleaner and easier to maintain
- Common signs to replace: heavy staining, rust/corrosion, warping, holes, or the element not sitting level
What's included: One 8-inch drip bowl. Install notes:
- Disconnect power and allow the cooktop to cool completely
- Lift the coil element slightly, then pull straight out of the receptacle
- Remove the old bowl, align the notch/orientation of the new bowl, and seat it flat
- Reinsert the coil element terminals fully into the receptacle and verify it sits level
Do-It-Yourself Stories from Customers like You
The surface burner wouldn't heat. (mr) Kim B. • Amarillo , TX • February 17, 2023
Ordered and replaced it with a new 8" Surface Burner from you.
Read more
More
$166.50
- Compare At:
-
$185.00
- You Save:
-
$18.50
Genuine Samsung part
By: Samsung
Part Number: DG47-00038B
The Range Bake Element Bottom Heater Sheath is an essential component for maintaining the efficiency of your range's baking function. This genuine OEM part ensures a perfect fit with your Samsung range, providing reliable performance and durability. Designed to protect the bottom of your bake element, it helps prevent damage from spills and debris, extending the lifespan of your appliance. Installing the Range Bake Element Bottom Heater Sheath is straightforward, allowing you to restore your range's functionality quickly and easily. By using this genuine OEM part, you can enjoy consistent and even heating during baking, enhancing your cooking experience. Specifically crafted to meet Samsung's high-quality standards, it guarantees optimal compatibility and performance. Whether you are repairing an older range or replacing a worn-out component, the Range Bake Element Bottom Heater Sheath ensures your appliance operates smoothly and efficiently, providing you with the dependable performance you expect from your kitchen equipment.
Do-It-Yourself Stories from Customers like You
Samsung range lower element replacement Stan H. • Alvaton , KY • March 05, 2016
Unplugged range, removed back panel. Loosened plug block from range, unhooked wires from existing element, then sliced through insulation between element ends with sharp knife. Removed screws holding element ends then removed element.
Inserted new element, screwed it in place, connected wires and replaced plug block. Vacuumed up fiberglass insulation dust and replaced back panel. Replaced plug then tested.
Read more
More
$143.95
- Compare At:
-
$169.86
- You Save:
-
$25.91
Genuine Ge part
By: Ge
Part Number: WB44X134
The Oven Broil Kit is an OEM part for GE ovens. It includes the broil element, which is responsible for generating high heat from the top of the oven to broil food. The broil element, which has screw-on terminals, measures 11-3/8" wide and 15-5/8" long from the mounting bracket to the end of the element. The distance from the bracket to the terminal end is 1-5/8".
You should replace this broil kit if it fails to heat properly. Causes of a bad broil kit can include electrical faults, such as short circuits or open circuits in the element, physical damage from accidental impact, or wear and tear over time.
Symptoms of a bad broil kit include:
- The broil element not heating up
- Uneven broiling results
- Visible damage or burns on the element
- The oven tripping the circuit breaker when broil mode is activated
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
I needed a new gasket, the broiler element had burned up and the light lens was broken many moons ago Paula B. • Scenery Hill , PA • June 22, 2017
I have had this oven for 40+ years. It is an enamel oven, something that you can no longer buy. Because I did not wish to buy new, I decided to service it myself and searched for the parts I needed. AppliancePartsPros.com was the only site to offer all three parts, so many having been discontinued by other providers. I replaced the oven gasket, the broiler element & the lens without any difficulty. I have replaced the bake element previously as well. I am very grateful that I was able to keep...
Read more
More
$36.25
- Compare At:
-
$43.14
- You Save:
-
$6.89
Genuine Ge part
By: Ge
Part Number: WB30X24400
The Surface Heating Element is an OEM part for GE ranges. This element is responsible for providing heat on the stovetop, allowing you to cook food efficiently and precisely. It ensures even heat distribution across your cookware, contributing to optimal cooking performance.
Causes of a bad surface heating element can include wear and tear from regular use, damage due to spills or impact, or electrical issues such as short circuits. Over time, these factors can lead to the element malfunctioning or failing to heat up.
Symptoms of a bad surface heating element include:
- Element not heating up or only partially heating
- Uneven heating across the element
- Visible damage or burn marks on the element
- Sparking or unusual noises during operation
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Heating element not getting hot. Roger C. • Newton , IL • August 22, 2019
The heating element contact ears and the terminal block contacts were burnt on the existing burner. I ordered the new terminal block kit and surface heating element from Appliance Parts Pros. Delivery was exceptionally fast (I just used regular shipping). The new terminal block kit came with very long wires, so I cut them and installed new terminal ends, rather than zip-tie the long wires together. Very happy with repair.
Read more
More
$72.59
- Compare At:
-
$85.66
- You Save:
-
$13.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10310249
The Broil Element is an OEM component for Whirlpool ranges. It is a vital heating component located at the top of the oven cavity that provides intense radiant heat for broiling functions.
Symptoms of a bad Broil Element include:
- Inability to engage broil mode
- Poor or negligible heating from the broiler
- Tripped circuit breakers when trying to broil
- Visible cracks, breaks, or damage to the broil element
Causes of failure can include deterioration over many heating and cooling cycles. Metal fatigue from constant expansion and contraction eventually causes cracking or breakage.
This replacement broil element also fits Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
The broiler element in the top oven of my 12 year old maytag gemini broke and caught fire Adrienne L. • La Mesa , CA • November 14, 2014
I had the choice of spending $2K on another double oven stove or $60 on two elements. (I felt more secure about replacing both bake and broil elements just in case the fire had damaged the bake element)
It was an easy decision and quick replacement! Power was already off to the stove so I cleaned up the fire retardent mess. I even found easy instructions dismantling the oven door in order to clean the powder residue from between the glass. I then removed the rack and remaining old elements. I...
Read more
More
$78.95
- Compare At:
-
$93.95
- You Save:
-
$15.00
Genuine Ge part
By: Ge
Part Number: WB44T10043
The Broiler Assembly is an OEM replacement part for GE range. Located inside the oven, it houses the heating elements responsible for the broil cooking function.
Causes of a bad broiler assembly can include cracked or burnt-out heating elements that no longer ignite, damage from accidentally being cleaned with abrasive chemicals, or warping of metal components from overheating.
Symptoms of a bad broiler assembly include:
- Inability to activate or incomplete activation of the broil setting
- Reduced or uneven heating from compromised elements
- Warping or discoloration visible on assembly surfaces
- Presence of unusual odors from potential heating element failures
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broiler element was burned and melted Victoria L. • San Diego , CA • January 21, 2015
I ordered the replacement part; after it arrived, I turned off the power to the oven - watched the video on how to replace the part, which was fantastic as it told me to make sure when I disconnect the old element not to let the wires fall behind the oven (that would have been a big problem b/c it's a wall oven) - However, one wire still slipped back a little - so I used needle nose pliers to retrieve it. Was able to plug the new one in - screw it into place with the original screws. I made...
Read more
More
$84.32
- Compare At:
-
$99.50
- You Save:
-
$15.18
Genuine Whirlpool part
By: Whirlpool
Part Number: W11321472
The broil element is an OEM replacement part for Whirlpool ranges. It provides intense heat from above to brown and crisp foods like breads, meats, and vegetables.
Causes of a bad broiler element include scaling or charring developing on the coils over many cooking cycles. Wiring damage from cleaning chemicals is also possible.
Symptoms of a failed element include:
- Incomplete or uneven browning of broiled foods
- Reduced or inconsistent heat output
- The element making popping/crackling noises when in use
- Safety issues like exposed coils or wires posing burn risks
This OEM replacement is compatible with KitchenAid, Jenn-Air, and other brands.
Do-It-Yourself Stories from Customers like You
No heating for baking. George C. • Albany , WA • September 01, 2023
Replaced both bake and broil elements.
Read more
More
$72.55
- Compare At:
-
$86.33
- You Save:
-
$13.78
Genuine Ge part
By: Ge
Part Number: WB44X232
The Broil Element is an OEM part for GE ovens. It provides the necessary heat for broiling by producing high-intensity radiant heat from the top of the oven, allowing for cooking and browning foods.
Causes of a bad broil element can include repeated high-heat exposure, physical damage from cleaning or food spills, and electrical surges.
Symptoms of a bad broil element include:
- Inconsistent or no heat during the broiling cycle
- Visible signs of damage, such as blisters or breaks in the element
- Sparking or unusual noises when the broil function is engaged
- Uneven cooking or browning of food
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Oven broil element was broken in half after self cleaning cycle Charles R. • Charlotte , NC • January 24, 2015
I needed to replace the oven broil element on my 15 year old GE range/oven unit. The broil element was broken in half during an oven self-cleaning cycle. Due to the age of the oven, I decided to replace both the broil and bake elements. I ordered the elements from Appliance Parts Pro. Their web site made it very easy to identify and locate the correct replacement parts. The parts arrived in 2 days. I watched the repair demo videos available for each element. Although the oven used in the demo...
Read more
More
$72.95
- Compare At:
-
$87.54
- You Save:
-
$14.59
Genuine Ge part
By: Ge
Part Number: WB30X20481
The Surface Heating Element is an OEM part for GE ranges. The element is a large 8" plug-in style burner. This element is designed to provide consistent and even heat for cooking on the stovetop. It is typically used for tasks such as boiling, simmering, and frying, ensuring that your cookware heats up efficiently.
You should replace the surface heating element if it becomes faulty. Causes of a bad surface heating element can include wear and tear from regular use, electrical faults, or physical damage. Over time, the element may degrade, affecting its ability to heat properly.
Symptoms of a bad surface heating element include:
- Element not heating up
- Inconsistent or uneven heating
- Sparks or electrical shorts
- Visible damage or burning on the element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Unit would not "heat up" anymore and also found the receptacle contacts were badly burnt and charred Margaret J. • Hanover , PA • September 23, 2014
Replaced defective/worn surface unit and burnt receptacle!
Read more
More
$68.53
- Compare At:
-
$81.55
- You Save:
-
$13.02
Genuine Ge part
By: Ge
Part Number: WB30X348
The 8-inch Large Surface Element is an OEM replacement part for GE electric ranges. Occupying a full burner space, it provides powerful heating for large pots and pans. Consistent output is important for chef-quality results. Fits those General Electric and Hotpoint ranges using a 2350 watt, hi-rise, no trim ring, 2 wire, screw-in element.
Causes of a bad surface element can include electrical malfunctions, frequent use leading to wear and tear, or physical damage from impacts or spills. Over time, the element may burn out or develop hot spots, leading to uneven heating.
Symptoms of a failing element include:
- Heat not radiating out evenly from the entire coil surface
- Fluctuating temperatures and inconsistent boiling or searing
- Exposed or damaged wiring presenting shock or burn risks
- Controls no longer functioning properly to turn the element on/off
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges
NOTE: For the matching 6-inch element order WB30X359. Includes the ceramic terminal blocks, clips, and screws for mounting.
Do-It-Yourself Stories from Customers like You
Needed to replace all surface elements drip pans rings and baking element in stove Andy F. • Starkville , MS • May 01, 2016
Ordered new parts and replaced all. Had to slightly modify the wire terminals all four surface elements so that they would fit the ceramic insulators that were shipped with each one.
Read more
More
$56.23
- Compare At:
-
$102.11
- You Save:
-
$45.88
Genuine Frigidaire part
By: Frigidaire
Part Number: 316413800
The Bake Element is an OEM replacement part for Frigidaire ovens and ranges. Located at the bottom of the oven cavity. This fundamental component produces the heat needed for baking, roasting, and heating functions.
Causes of bake element problems involve normal wear from repeated heat cycles and heavy-duty use over many years. Extended exposure to high oven temperatures can degrade fragile coil filaments.
Symptoms of a faulty bake element include:
- Uneven or inadequate heating for baking/roasting recipes
- Slow or inefficient preheating of oven interior
- Oven temperature failing to reach desired settings
- Element coil is visibly discolored or deteriorated
This OEM Frigidaire replacement element is also compatible with Electrolux, Gibson, and Kelvinator appliance brands.
Do-It-Yourself Stories from Customers like You
One day it didn't heat up for baking Matthew M. • Greensboro , NC • July 01, 2017
Watched the video here, took the leap that burner was the problem and ordered it. Also found another vid on you tube that was more specific to my Kenmore. Tip: find out how to take off the oven door. For mine it was very easy but not detailed in the APP vid.
I followed instructions in APP vid but also first took off back panel of range and tested resistance of old burner to ensure that was truly the problem (as suggested by other YT vid). Also, dis/connecting the wires from the back is easier...
Read more
More
$171.95
- Compare At:
-
$204.62
- You Save:
-
$32.67
Genuine Ge part
By: Ge
Part Number: WB44K5018
The Bake Element is an OEM part for GE ovens, designed to provide the heat necessary for baking. This element is located at the bottom of the oven cavity and turns red hot when electricity flows through it, thereby heating the oven to the desired temperature. It's a crucial component for ensuring your oven can reach and maintain the set baking temperatures, playing a key role in the cooking process by providing consistent, even heat.
The most common cause of bake element failure is normal wear and tear over time. Frequent use can lead to the element burning out, which prevents it from heating. Additionally, physical damage during cleaning or cooking can also cause the element to fail prematurely.
Symptoms of a failing Bake Element include:
- The oven not heating up to the set temperature
- Uneven cooking or baking results
- No visible red glow from the element when the oven is turned on
- The element showing signs of damage such as blistering or cracks
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The bake element on our stove burned out Ginny A. • White Oak , GA • June 27, 2014
My husband, who was the FIX-IT repair man at our house, passed away in March. When our bake element burned out my son, who is 18 looked at me and I looked at him and we shook our heads! We hunted on the oven till we found the serial number. We googled for GE OVEN repair parts and up popped AppliancePartsPros. We found the element, ordered it, watched the DETAILED VIDEO on how to change it out. The part came the next day. Philip had the old one out and the new one in in less than 10...
Read more
More
$102.95
- Compare At:
-
$122.51
- You Save:
-
$19.56
Genuine Bosch part
By: Bosch
Part Number: 00367648
The Bake Element is an OEM part for Bosch 30" ovens. This part is responsible for heating the oven's interior, enabling consistent and thorough baking results.
A malfunctioning bake element can stem from various causes, including burnt-out coils, physical damage such as breaks or warps, or electrical issues like faulty wiring or connections.
Symptoms of a bad bake element include:
- The oven not heating up to the set temperature.
- Visible damage to the element itself, such as blistering, splits, or breaks.
- Lack of heat when the oven is turned on, indicating the element may not be functioning at all.
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Baking heat element on 14 year old thermador double oven Michael P. • Holmdel , NJ • October 16, 2016
It was a very quick repair that took less than 5 minutes to fix.
Read more
More
$72.95
- Compare At:
-
$86.81
- You Save:
-
$13.86
Genuine Frigidaire part
By: Frigidaire
Part Number: 316430900
The Broil Element is an OEM part for Frigidaire ranges and wall ovens. This part is responsible for providing intense, direct heat from the top of the oven cavity during the broiling process. This allows for efficient browning, crisping, and charring of foods.
Causes of a bad broil element can include excessive use over time leading to normal wear and tear, exposure to food spills or splatters causing premature degradation, or electrical malfunctions.
Symptoms of a bad broil element include:
- Inability to achieve proper broiling temperatures
- Uneven heating or cold spots in the broiling area
- Visibly damaged, blistered, or burned-out element
- Electrical issues, such as the element not heating at all
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
We accidently baked aluminum foil on our upper (broil) element we were getting used to our new oven and the foil covered dressing containers were too close to the element James H. • Acworth , GA • December 08, 2014
I replaced the element. I went on your site to order a new element, and had trouble locating the exact replacement. A young man named Kenneth came on live chat and assisted me. He found the correct one and assisted me with the order. It was all very smooth and quick. I received the part in two days !
Read more
More
$143.33
- Compare At:
-
$170.56
- You Save:
-
$27.23
Genuine Ge part
By: Ge
Part Number: WB30X359
The 6-inch Small Surface Element is an OEM part for GE electric ranges. This heating element is designed to provide consistent and efficient heat for cooking on the stovetop. It fits into the burner receptacle and is controlled by the burner switch to deliver the appropriate amount of heat for various cooking tasks.
Causes of a bad surface element can include regular wear and tear, damage from cookware, or electrical issues.
Symptoms of a bad 6-inch surface element include:
- The element not heating up at all
- Uneven or inconsistent heating
- Visible damage or warping of the element
- Sparks or unusual noises when the element is turned on
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My 6" stove top burner did not work on my old ge electric range Gregory S. • Bridgepor , CT • December 21, 2014
Going on line and viewing your website, you provided a very easy way to get me to a picture that was exactly what I wanted with the exact (old style) connections. I had previously gone to Home Depot twice, and I still did not get the correct burner that I needed. Your website was great, I should have gone there first.
I used the part that I received from AppliancePartsPROS.com and replaced the defective, old and non-working surface element. It was easy, I used a screw driver to snap off a...
Read more
More
$40.31
- Compare At:
-
$68.43
- You Save:
-
$28.12