Range / Cooktop / Oven Parts

It took no time to find where the problem was! I got my Frigidaire model number and got on-line with AppliancePartsPros.com where I have gone for over a decade for all my household repairs. Why? because they are honest, helpful, considerate, fast, and its easy to locate and SEE the exact part I need. 10 minutes after the burning of my element, one was in my cart and ordered! Done. TWO days later, the part arrived. I turned off the circuit breaker, unscrewed the two 1/4" screws and pulled off... Read more

I ordered the part I was sure I needed through the Appliance Pro website. I was surprised the part arrived in just two days. FIRST UNPLUG THE OVEN.. I removed the baking racks then two screws holding the plate over the element. I then removed three screws holding the old element in place, then gently wiggle/pull the element free from the electrical connections in the back of the oven. (Note: You cannot see the connections at this point. You'll need to remove the terminal block cover on the... Read more

• Little to no heat when broiling
• Little to no heat when baking
• Gas igniter glows, but will not light
• Won't start

If the oven burner would not light but the broiler would this indicated that the safety valve is OK. Problem had to be with the igniter. Removed the bottom panel in the oven and restarted the oven. The igniter would not glow at all. It should be brilliant red. This is where the problem came in. I could not find the location of the model on the Kenmore range anywhere you would normally look - the back, the wiring envelope, the oven door jamb etc. Also the igniter cannot be removed from... Read more

• Little to no heat when baking
• Oven is too hot
• Oven not heating evenly
• Won't start

Of course, these things always seem to happen on a holiday! Luckily we were not having guests for dinner - so quickly changed our eating plans for the evening. I went directly online and Googled "Bake elements for GE ovens". At first I did not think I would have luck finding this part because of the oven's age. AppliancePartsPros.com was one of the service dealers listed first and catered specifically to GE appliances and parts. So, I typed in the Model number and low and behold, a screen... Read more

• Won't start
• Element will not heat

After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty. One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove... Read more

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

• Gas smell
• Gas igniter glows, but will not light
• Little to no heat when baking
• Won't start

My Tappan Range, which I paid a grand total of $65.00 for, and have been using since Katrina, (Katrina in 2005 is how we measure time in South Mississippi.) I live in an old house, and I am old, too. Last winter was the coldest I can remember, and my husband (older than I and far more hard-headed) used the oven like a heater. I read all user's manuals, because I use only used stuff, I can download the manuals or read them online, and it clearly stated in there NOT to use the oven as a... Read more

I got online and found AppliancePartsPros.com. I found others had the same problem, and had replaced the switch, with my model number your rep got me the exact switch and a video on how to change it. It took approx 15-20 min . was very happy with the service, will use again in future if needed. Gary Read more

• Little to no heat when baking
• Oven not heating evenly
• Won't start
• Element will not heat

Watched AppliancePartsPros.com instruction video. Ordered new oven bake element, which arrived a couple days later. Removed old oven bake elelment. Installed new oven bake element. I am very appreciative of the instructional video. It's a very handy way for me to figure out if it's a do-it-yourself repair or not. In this case, another key thing it pointed out was the fact that the two wires that attach to the oven bake element have a tendency to slip back into the insulation behind the... Read more

• Won't start
• Element will not heat

The fix was to replace the infinite control switch on my Whirlpool range. A simple task. Read more

Visually inspected bottom heating element and found that it had failed. There was a @2" gap of missing element and burned debris below the damaged area. This was discovered 3 days before Christmas. 1. Open under oven storage drawer and look on the left inside frame frame for Model ID and Serial No. 2. Search on AppliancePartsPro.com for bottom heating element. 3. Ordered part on Sunday evening before Wednedsay Christmas - with expedited next day delivery. 4. Received order confirmation and... Read more

My Kenmore 790.74139310 gas range was taking over 30 minutes to reach 350F. It used to take a little less than 10 minutes. The problem was the ignitor for the lower gas burner. It would glow but not pass sufficient current to increase the gas flow to the lower burner. Once at temperature, there is of course loss of heat when loading the oven with room temperature food. This took too long to recover, so we did not have proper temperature for proper cooking for the first 30 to 40 minutes. Food... Read more

• Little to no heat when baking
• Oven not heating evenly
• Won't start

It took a few of us. One to vacuum up the fire extinguisher residue. One to trip the breaker. One to provide light. One to clean out under the stove while it was pulled out. I disconnected the bake element. I needed help to disconnect one of them because it was very tight. I put the element into the oven and reconnected the right side, very easy. The left side fell back into the slot. Curses ensued. I removed the back plate and it was very easy to thread the left wire back into the oven and... Read more

• Little to no heat when broiling
• Little to no heat when baking
• Won't start
• Gas igniter glows, but will not light

There are two igniters in oven, one for top broiler and one for bake oven at bottom. Your website help me troubleshoot the problem and locate the part. ordered part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL. No need to pull out oven as power cord can be accessed from removing bottom storage drawer. Step 1: Remove the storage drawer from below the oven and disconnect the power cord from inside. No need... Read more

• Element will not heat

I googled "drip pans for electric range" and came upon your web site as well as some others. After looking at three or four I decided to go with your company. The choices clearly described the pans available so I didn't have to guess which one would fit. The price was very good and they arrive in the mail two days after I ordered them. The drip pans fit perfectly. Thank you. Charles Cummings Read more

• Oven is too hot
• Little to no heat when baking
• Oven not heating evenly
• Element will not heat

I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns. The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more... Read more