Range / Cooktop / Oven Heating Element

Easy fix, took out the screws and disconnected the element. Make sure you unplug the oven!! replaced it with the new elements. oven is working good. Read more

• Little to no heat when broiling

Turned off the oven power at the breaker box. Removed the (2) 1/4" screws holding the front support bracket and removed the front support bracket. (This bracket is necessary as the broiler element is in the top of the oven) Then I removed the (2) 1/4" screws holding the element against the back of the oven, gently pulled the element away from the back of the oven to expose and unplug the (slip on) electrical connections, and removed the burned out element. Contrary to some home projects I... Read more

Installed replacement burner. Not a one-to-one fit where the wiring is concerned but everything needed to effect the change out was provided with the part. It is important to make notes of what was connected to what on the old one and to compare that to the new one. I used a download of the wiring diagram to good effect because it has the color code for the wiring on it. I am an engineer and can read such things which the average DIY'r might not be able to do so the notes will help. The... Read more

Ordered the closest part you had. Replaced the whole unit and it is working fine. Read more

I broke two of the elements in my GE Profile cooktop because I failed miserably at removing the glass top. It pays to do your research, kiddies. All it takes is a Number 10 Torx bit to remove 12 screws holding the glass to the body of the appliance, and it lifts straight up. I was replacing the glass because it broke during my home's construction. Anyway, you need a 1/4" nut driver to remove the mounting tabs on the bottom of the old element and transfer them to the new one. The whole swap out... Read more

• Element will not heat

It was very easy to find the part we needed, I put the model number in and it showed all the parts. Picked the broken buner, ordered it and was amazed, it came the next day. The directions were on the back of our stove. Simply followed what it said to do. Replaced burner, put it back together. Works perfectly. Wish we would of fixed it sooner. Saved having to have a service call. Read more

Simple replacement of the heating element. Found multiple videos on youtube that show how to to do this repair. The cooktop is easily opened by removing 3 screws, but I recommend having a second set of hands when performing the repair because you will have to hold up the glass stove top and unscrew the components. The heating element is attached to a bracket that comes off easy as well. Also have to detach 5 wires that mate by sliding together. We took a picture before removing to make... Read more

• Little to no heat when baking

Turned off 40 Amp breaker. Removed shelves from oven. Removed two screws in back panel holding element in place. Slowly pulled element free making sure wires stayed attached and not lost in oven insulation. Removed two wires from old element. Attached wires to new element. Pushed wires back into oven rear wall. Reinstalled the previously removed two screws. Turned on breaker. Total time less than 10 minutes. Read more

First, I just unscrewed all nuts that are holding the frame and all surface elements. Once all parts, surface elements, control switches, are loose from the original glass, I just moved all parts to the new glass. Due to the weight of the glass, all actions have to be done carefully as I broken one corner of the glass couple of years ago when I replaced one of the control switch. Read more

New part clipped right in. Tightened 2 screws and was done in 5 minutes. Read more

• Little to no heat when baking

Excellent. I bought the part from AppliancePros and it arrived in 2 day. I followed the instructions on the video and did the repair in 10 minutes. It was easy and great! Read more

I completely disassembled the entire unit sandblasted repainted with epoxy paint and reassembled. bought a few new parts and its like new again this unit is no longer available and its built into my boat. Read more

We had ordered and installed the drip pans and when we took a look, we knew we needed new elements. Those were perfect; exact replacement. The problem was on the eight inch units, the rim of the drip pan touched the element. It was a simple matter of removing a small bit of the drip pan where the element enters. Aircraft snips and a little polishing with a Dremel tool, and all is well. Wife loves the new elements. Read more

Had to buy repair manual after that it went well Read more

Replaced element Read more