Washer Control Board

This main control board is the washer's central electronic brain, coordinating cycles, motor and valve operation, and safety checks. Replacing a failed board can restore normal starts, fills, agitation/spin, and reliable cycle completion.

• Manages cycle timing and power to the drive motor, drain pump, and water inlet valves
• Monitors inputs from the lid lock and other sensors for safe, accurate operation
• Interfaces with the user controls to run the selected wash program
• Typical failure symptoms: won't start or power up; no fill/agitate/spin/drain; stops mid-cycle; error codes or unresponsive controls

• Disconnect power before servicing and handle the board with ESD protection
• Access the control at the top/rear area, transfer connectors one at a time to the same positions, and secure the board in the original mounting
• After installation, restore power and run the unit's diagnostic/service mode to verify operation; some models may require a configuration/personality step per the tech sheet

The Motor Control Board is an OEM part for Whirlpool washing machines. This electronic board is responsible for regulating and controlling the motor's speed and direction during various cycles, ensuring optimal washing performance.

Over time, the motor control board can fail due to electrical issues, power surges, or general wear and tear. When the control board malfunctions, it can disrupt the washing machine's operation and lead to various performance issues.

Symptoms of a bad motor control board include:

• The washer not spinning or agitating
• Erratic or unpredictable cycle times
• The washer stopping mid-cycle
• Error codes related to motor function

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The washer timer is an OEM part for GE washing machines. This timer controls the various cycles of the washing machine, including wash, rinse, and spin cycles. By regulating the duration and sequence of each cycle, the timer ensures that the washing machine operates smoothly and efficiently.

Causes of a bad timer washer can include electrical failures, wear and tear from regular use, or internal mechanical issues. A faulty timer can lead to problems with the timing and execution of the wash cycles, potentially leaving clothes unwashed or causing the machine to stop unexpectedly.

Symptoms of a bad timer washer include:

• The washer not advancing through cycles
• The washer stopping mid-cycle
• Inconsistent or incorrect cycle timing
• The timer knob not turning or becoming stuck

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This main control board replaces the washer's primary electronic controller to restore cycle selection and timed operations. It re-establishes the washer's command logic so cycles start, advance, and end correctly. What it does:

• Interprets user inputs and runs the wash cycle sequence (fill, agitate, drain, spin)
• Controls timers, motor relay signals, and valve/actuator commands
• Can resolve symptoms like no cycle start, stuck or repeating cycles, unresponsive controls, or erratic behavior
• Works with related sensors and switches to coordinate machine functions

• One main control board

• Disconnect power before servicing to avoid shock or board damage
• Handle the board by edges and avoid static discharge; use ESD protection if available
• Verify connector positions and seating; transfer any required standoffs or mounting hardware from the old board

The Noise Filter Assembly is an OEM part for LG washing machines, designed to minimize electrical noise interference within the appliance. This essential component ensures that the washer operates smoothly without emitting disruptive sounds that can affect both the performance of the washer and the comfort of your home environment. 

Causes of a bad Noise Filter Assembly can range from wear and tear over time to exposure to power surges or electrical spikes, which can damage the internal components of the filter. 

Symptoms of a bad Noise Filter Assembly include:

• Increased electrical noise or buzzing sounds emanating from the washer
• Intermittent disruptions in the washer's performance
• The washing machine failing to start or experiencing power fluctuations

This OEM LG part is also compatible with some Kenmore models.

The Control Timer is an OEM replacement part specific to Whirlpool washers. It is the electronic component responsible for governing the sequence and duration of wash cycles. Located inside the control console, the timer works with the control dial to initiate various wash/rinse phases based on the selected settings.

Causes for timer failure may include water exposure corroding electrical circuits or repeated rapid switching wearing out internal switches.

Symptoms of a faulty control timer include:

• Inability to advance through complete cycles
• Random operation of rinse or spin functions
• Premature termination of cycles before finishing
• Failure to respond when turning the cycle selector

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer is an OEM replacement part for Whirlpool washers. This electronic part is essential for accurately tracking washing cycles and automatically shutting off the washer at the end of the selected time period.  

Symptoms of a bad timer include:

• Cycles failing to complete fully and the washer not turning off automatically
• Inaccurate timekeeping causing under or over-washing of clothes
• The dial not rotating smoothly between settings or options  

Causes of a bad timer can include normal wear over years of use. The internal timekeeping components can degrade or fail due to repeated power cycling of the washer.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

The Timer Washer is an OEM part for GE washing machines. It controls the various cycles of the washing machine by regulating the amount of time each phase runs, including filling, agitating, rinsing, and spinning. The timer ensures that the laundry process follows the correct sequence and duration for optimal cleaning performance.

Common causes of a bad timer include electrical issues such as shorts or faulty wiring, wear and tear from extended use, or mechanical failure within the timer mechanism.

Symptoms of a bad timer include:

• The washing machine not advancing through cycles
• Stuck cycles or skipping phases
• The washer stopping abruptly during a cycle
• Inconsistent cycle times or improper functioning of specific wash settings

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Washer Timer is an OEM part for GE washing machines. This part manages the sequence of operations during the wash cycle, including filling, agitating, rinsing, and spinning. 

Causes of a bad washer timer can include electrical issues such as short circuits or power surges, wear and tear of internal mechanical components, and moisture infiltration leading to corrosion.

Symptoms of a bad washer timer include:

• The washing machine not advancing through cycles
• Cycles taking longer than usual or not completing
• The machine stopping mid-cycle or not starting
• Inconsistent or erratic cycle times

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a motor control board for a washing machine. It comes with the board, tape, bracket, and screw mounted on control. In most cases, this part is located on the bottom of the appliance near the drive motor. The purpose is to control the speed of the drive motor. It also works to determine the direction of the tumble and spin actions while a cycle is in process. If the washing machine is pumping but does not spin, this is often the result of a malfunctioning motor control board.If the motor control board has gone bad, it should be replaced. To replace it, make sure the washer is unplugged or the circuit breaker has been turned off. Pull the washer away from the wall, remove the knobs from the front and screws from the back, and lift the control panel. This offers access to the motor control board, which should be removed so the new part can be installed.This motor control board is made for use with washing machines by Electrolux, Frigidaire, Crosley, and Kenmore. It is sold on an individual basis. This is an authentic OEM replacement part that is directly sourced from the manufacturer.

The Cntrl-elec is an OEM part for Whirlpool washing machines. It is the electronic control board that directs all wash cycle functions such as temperature, spin speed, water levels, and more. The control board uses embedded programming to operate components based on selected cycles and settings.

Causes of a bad control board can include water damage, power surges corrupting electronics over time, or failures in integrated microchips and supporting mechanisms.

Symptoms of a bad washing machine control board include:

• Inability to start or complete cycles
• Error codes or flashing lights indicating issues
• Unresponsive or inconsistent response to inputs and buttons
• Buzzing noises or smells coming from the control area

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer is an OEM part for Whirlpool washing machines. This part controls the various cycles of the washing machine, including wash, rinse, and spin cycles, by regulating the amount of time each cycle runs.

Causes of a bad timer can include electrical malfunctions, wear and tear over time, or damage to the timer's internal mechanisms.

Symptoms of a bad timer include:

• The washer not advancing through cycles
• Cycles running too long or too short
• The washer stopping mid-cycle
• Inconsistent or unpredictable cycle timing

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Timer is an OEM part for Whirlpool washing machines. It controls the electrical components and the sequence of operations during the wash cycle, ensuring each phase of the cycle occurs at the right time.

Causes of a bad timer include electrical issues such as short circuits or power surges, wear and tear of internal mechanical components over time, and exposure to moisture or detergent, which can lead to corrosion.

Symptoms of a bad timer include:

• The washer not advancing through cycles
• Cycles taking longer than usual
• The washer skipping cycles
• The machine stopping mid-cycle or not starting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This mechanical timer sequences the dishwasher through its wash, drain, and dry steps. Replacing a failing timer restores proper cycle advancement so the dishwasher starts, progresses, and finishes cycles reliably. What it does:

• Times and sequences power to the wash motor, drain pump, fill valve, and heater for each stage of the cycle
• Advances the cycle automatically and moves the dial/indicator through programmed steps
• Coordinates wash, rinse, and dry durations for consistent results
• Typical failure symptoms: cycle won't advance or stops mid-cycle; runs too long; must be advanced manually; timer knob won't turn

• 1 mechanical timer assembly

• Disconnect power at the breaker before servicing; do not rely on the control panel to turn the unit off
• Access the timer from the control console/inner door; remove screws to reach the component
• Photograph/label wire positions and transfer leads to the new timer one at a time
• Reuse existing mounting hardware and knob; ensure the shaft orientation matches before reassembly

This mechanical cycle timer controls the sequence and duration of operations in the selected program. Replacing a worn timer restores reliable cycle selection and proper advancing from start to finish.

• Controls cycle timing and advancement via internal cams and contacts
• Directs power to components in the correct order for each cycle
• Stops the appliance at the end of the cycle
• Fixes: cycle won't advance or gets stuck, won't start, stops mid-cycle, dial doesn't move or skips

• Disconnect power before servicing
• Access the timer through the control console; remove knob/dial as needed
• Transfer wires one at a time from the old timer to the new unit, matching terminals
• Reuse existing mounting hardware and console parts; verify proper alignment before reassembly

The Washer Timer is an OEM part for Frigidaire washing machines. It controls the sequence of operations in the washing machine, including filling, washing, rinsing, and spinning. By managing the timing of these cycles, the timer ensures the washer operates efficiently and effectively.

Causes of a bad washer timer can include electrical malfunctions, wear and tear from regular use, or physical damage to the timer mechanism. Power surges, exposure to moisture, and accidental impacts can also lead to timer failure.

Symptoms of a bad Washer Timer include:

• Washer not advancing through cycles
• Machine getting stuck on a single cycle
• Incorrect timing for washing, rinsing, or spinning
• Washer not starting or completing a cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.